RIPTIDE II Foaming Shower Room Cleaner
MATERIAL SAFETY DATA SHEET
Version Number: 2 Preparation date: 2009-02-18
1. PRODUCT AND COMPANY IDENTIFICATION
RIPTIDE II Foaming Shower Room Cleaner
Product name:
MS0400133
MSDS #:
4306110, 4306150
Product Code:
Restroom Care. This product is intended to be diluted prior to use.
Recommended use:
Manufacturer, importer, supplier:
US Headquarters
The Butcher Company
8310 16th St.
Sturtevant, Wisconsin 53177-1964
Phone: 1-800-225-9475
MSDS Internet Address:
www.thebutchercompany.com
1-800-851-7145 (U.S.); 1-651-917-6133 (Int'l);
Emergency telephone number:
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
?DANGER
?CORROSIVE TO EYES
?CAUSES EYE BURNS
?CAUSES SKIN IRRITATION
?HARMFUL OR FATAL IF SWALLOWED
_______________________________________________________________________________________________
Eye contact. Skin contact. Inhalation. Ingestion.
Principle routes of exposure:
Corrosive. Causes permanent eye damage, including blindness.
Eye contact:
Moderately irritating to the skin.
Skin contact:
May cause irritation and corrosive effects to nose, throat and respiratory tract.
Inhalation:
Corrosive. Causes burns to mouth, throat and stomach.
Ingestion:
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous ingredients
Ingredient(s) CAS # Weight %
Lauryl dimethyl amine oxide 1643-20-5 0.1 - 1.5%
Urea hydrochloride 506-89-8 10 - 25%
2-butoxyethanol 111-76-2 1 - 5%
Methyl salicylate 119-36-8 0.1 - 1.5%
4. FIRST AID MEASURES
Immediately flush eyes with running water for 15-20 minutes, keeping eyelids open. Get medical
Eye contact:
attention immediately.
Immediately flush with plenty of water. If irritation persists, get medical attention.
Skin contact:
If breathing is affected, remove to fresh air. Get medical attention immediately.
Inhalation:
If swallowed, rinse mouth. Give a cupful of water or milk . THEN IMMEDIATELY CONTACT A
Ingestion:
PHYSICIAN OR POISON CENTER. DO NOT induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious person.
Individuals with chronic respiratory disorders such as asthma, chronic bronchitis, emphysema, etc., may
Aggravated Medical Conditions:
be more susceptible to irritating effects.
RIPTIDE II Foaming Shower Room Cleaner 1 of 4
MS0400133 Version Number: 2 Preparation date: 2009-02-18
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media:
Dry chemical, water spray, foam, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
None.
Special protective equipment for firefighters:
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Specific hazards: None known.
Unusual hazards: Corrosive material (See sections 8 and 10).
Specific methods: None known.
No information available.
Autoignition temperature:
NFPA Health: 3 Flammability: 0 Instability: 0
6. ACCIDENTAL RELEASE MEASURES
Put on appropriate personal protective equipment (see Section 8.).
Personal precautions:
Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Keep
Environmental precautions
in suitable and closed containers for disposal. Prevent product from entering drains.
and clean-up methods:
7. HANDLING AND STORAGE
Avoid contact with skin, eyes and clothing. Do not taste or swallow. Avoid breathing vapors or mists.
Handling:
Use only with adequate ventilation. Remove and wash contaminated clothing and footwear before re-
use. Wash thoroughly after handling. Product residue may remain on/in empty containers. All
precautions for handling the product must be used in handling the empty container and residue. DO
NOT MIX WITH BLEACH OR ANY OTHER PRODUCT OR CHEMICAL . FOR COMMERCIAL
AND INDUSTRIAL USE ONLY.
Protect from freezing. Keep tightly closed in a dry, cool and well-ventilated place. KEEP OUT OF
Storage:
REACH OF CHILDREN.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures to reduce exposure:
Good general ventilation should be sufficient to control airborne levels. Respiratory protection is not required if good ventilation is maintained.
Personal Protective Equipment
Chemical-splash goggles.
Eye protection:
Chemical-resistant gloves
Hand protection:
If major exposure is possible, wear suitable protective clothing and footwear.
Skin and body protection:
In case of insufficient ventilation wear suitable respiratory equipment. A respiratory protection program
Respiratory protection:
that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements must be followed whenever
workplace conditions warrant a respirator's use.
Handle in accordance with good industrial hygiene and safety practice
Hygiene measures:
Ingredient(s) ACGIH OSHA Mexico
2-butoxyethanol 20 ppm (TWA) Skin 75 ppm (STEL)
240 mg/m3 (TWA) 360 mg/m3 (STEL)
50 ppm (TWA) 26 ppm (TWA)
120 mg/m3 (TWA)
3 0 0
HMIS Health Fire Hazard Reactivity
Personal protective equipment
2 of 4
MS0400133 Version Number: 2 Preparation date: 2009-02-18
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid Appearance: Liquid
Color: Pink Odor: Wintergreen
pH: 0.75 Dilution pH: 1.4 9.09%
Specific gravity: 1.051 Density: 8.77 lbs/gal
Bulk density: No information available Vapor density: No information available
Evaporation Rate No information available Viscosity: No information available
Solubility: Completely Soluble VOC: 3% *
Solubility in other solvents: No information available
Partition coefficient (n-octanol/water): No information available
Not determined
Boiling point/range:
Not determined
Melting point/range:
>200癋 >93癈
Flash point:
Not determined
Decomposition temperature:
No information available
Autoignition temperature:
0 %P
Elemental Phosphorus:
* - Title 17, California Code of Regulations, Division 3, Chapter 1, Subchapter 8.5, Article 2, Consumer Products, Sections 94508
10. STABILITY AND REACTIVITY
Stable.
Stability:
None under normal processing.
Polymerization:
Bases . Do not mix with any other product or chemical.
Materials to avoid:
Do not mix with any other product or chemical .
Conditions to avoid:
None known.
Hazardous decomposition products:
11. TOXICOLOGICAL INFORMATION
Hazardous ingredients
Ingredient(s) LD50 Oral - Rat (mg/kg) LD50 Dermal - Rabbit LC50 Inhalation - Rat
Lauryl dimethyl amine oxide 2700 Not available Not available
Urea hydrochloride 1121 Not available Not available
2-butoxyethanol 470 220 mg/kg 2.21 mg/L (4 h); 450 ppm (4 h)
Methyl salicylate 887 >5000 mg/kg Not available
Corrosive Oral LD50 estimated to be 3000 - 4000 mg/kg
Acute toxicity:
None known
Chronic toxicity:
Specific effects
None known
Carcinogenic effects:
None known
Mutagenic effects:
None known
Reproductive toxicity:
None known
Target organ effects:
12. ECOLOGICAL INFORMATION
No data available
Environmental Information:
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused products:
Dispose of according to all federal, state and local applicable regulations
RCRA Hazard Class: D002
3 of 4
MS0400133 Version Number: 2 Preparation date: 2009-02-18
14. TRANSPORT INFORMATION
DOT/TDG: Please refer to the Bill of Lading/receiving documents for up to date shipping information
15. REGULATORY INFORMATION
International Inventories
All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada (DSL/NDSL).
U.S. Regulations
California Proposition 65: This product is not subject to the reporting requirements under California's Proposition 65
STATE RIGHT TO KNOW
Ingredient(s) CAS # MARTK: NJRTK: PARTK: RIRTK:
2-butoxyethanol 111-76-2 X X X X
Water 7732-18-5 - - - -
Cocamidopropyl betaine 61789-40-0 - - - -
Lauryl dimethyl amine oxide 1643-20-5 - - - -
Alcohol ethoxylates 34398-01-1 - - - -
Urea hydrochloride 506-89-8 - - - -
Methyl salicylate 119-36-8 - - X X
CERCLA/ SARA
Ingredient(s) Weight % CERCLA/SARA RQ (lbs) Section 302 TPQ (lbs) Section 313
2-butoxyethanol 1 - 5% X
111-76-2
Ingredient(s) CAA HAP CAA ODS CWA Priority Pollutants
2-butoxyethanol X
111-76-2
SARA 311/312 Hazard Categories
x
Immediate:
-
Delayed:
-
Fire:
-
Reactivity:
-
Sudden Release of Pressure:
Canada
WHMIS hazard class: D2B Toxic materials.
Ingredient(s) CAS # NPRI
2-butoxyethanol 111-76-2 X
16. OTHER INFORMATION
Not applicable
Reason for revision:
NAPRAC
Prepared by:
None
Additional advice:
Notice to Reader: This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty,
express or implied, as to the accuracy of the information contained within. Actual conditions of use and handling are beyond seller's control. User is
responsible to evaluate all available information when using product for any particular use and to comply with all Federal, State, Provincial and
Local laws and regulations.
4 of 4
|