Grease & Oil Spot Remover Professional Strength Aerosol Page 1
RTN Number: 00000215 January 4, 2008
________________________________________
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
______________________
Product Identification
Product Name: Grease & Oil Spot Remover
Professional Strength Aerosol
Product Number: C980-12
CAS Number: Blend
______________________
Company Identification
Harris Research, Inc
1530 North 1000 West
Logan, UT 84321 USA
1-435-755-0099 (For product information)
1-800-424-9300 or 1-703-527-3887 (CHEMTREC)
2. COMPOSITION/INFORMATION ON INGREDIENTS
COMPONENT LISTING:
_____________
Chemical Name ________
Amount __________
CAS Number
WATER 60.0 - 100.0 % 7732-18-5
ETHYLENE GLYCOL MONOBUTYL ETHER 10.0 - 30.0 % 111-76-2
STYRENE - MALEIC ANHYDRIDE COPOLYMER, SODIUM SALT
1.0 - 5.0 % 52500-92-2
DIMETHYL ETHER 10.0 - 30.0 % 115-10-6
(See Section 8 for exposure guidelines)
(See Section 15 for regulatory information)
3. HAZARDS IDENTIFICATION
***************** EMERGENCY OVERVIEW *****************
* *
* CAUTION *
* *
* Eye irritant. May cause skin irritation after *
* repeated or prolonged contact. *
* *
**********************************************************
Grease & Oil Spot Remover Professional Strength Aerosol Page 2
RTN Number: 00000215 January 4, 2008
____________________________________________________________________________________________________
(section 3 continued)
NFPA Rating - Health: 2
Flammability: 2
Reactivity: 0
POTENTIAL HEALTH EFFECTS
EYE:
Causes eye irritation.
SKIN:
Frequent or prolonged contact may irritate the skin and cause a skin rash
(dermatitis).
INHALATION:
Prolonged or excessive inhalation may cause respiratory tract irritation.
INGESTION:
Irritating to mouth, throat, and stomach.
CARCINOGENICITY INFORMATION:
None of the components present in this material at concentrations equal to
or greater than 0.1% are listed by IARC, OSHA, or NTP as a carcinogen.
4. FIRST AID MEASURES
EYE CONTACT FIRST AID:
Flush eye with water for 15 minutes.
SKIN CONTACT FIRST AID:
Flush skin with plenty of water.
INHALATION FIRST AID:
Although this product is not known to cause respiratory problems, if
breathing is difficult, remove to fresh air.
INGESTION FIRST AID:
For larger amounts, do not induce vomiting, but give one or two glasses of
water to drink and get medical attention.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
COC Flash Point: None
PMCC Flash Point: 91.1 C (196.0 F)
Autoignition Temperature: None
Grease & Oil Spot Remover Professional Strength Aerosol Page 3
RTN Number: 00000215 January 4, 2008
____________________________________________________________________________________________________
(section 5 continued)
FLAMMABLE LIMITS IN AIR
LEL: None
UEL: None
FLAMMABLE PROPERTIES:
Aqueous solution in a flammable propellant (flashpoint = -42 F).
EXTINGUISHING MEDIA:
Foam, water fog, dry chemical.
6. ACCIDENTAL RELEASE MEASURES
SAFEGUARDS (PERSONNEL):
Protect skin and eyes from exposure.
INITIAL CONTAINMENT:
Absorb spills with inert material.
7. HANDLING AND STORAGE
HANDLING (PERSONNEL):
Avoid contact with eyes, skin, and clothing.
STORAGE PRECAUTIONS:
Keep away from heat and flame.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS:
Good general ventilation should be sufficient to control airborne levels.
EYE / FACE PROTECTION REQUIREMENTS:
Wear safety glasses.
SKIN PROTECTION REQUIREMENTS:
For brief contact, normal work attire should be sufficient.
EXPOSURE GUIDELINES:
ETHYLENE GLYCOL MONOBUTYL ETHER
OSHA PEL: 25 ppm, 120 mg/m^3
OSHA TWA: 25 ppm
ACGIH TWA: 25 ppm
Grease & Oil Spot Remover Professional Strength Aerosol Page 4
RTN Number: 00000215 January 4, 2008
____________________________________________________________________________________________________
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM ..................: Liquid
COLOR .................: Colorless
ODOR ..................: Glycol ether
SOLUBILITY IN WATER ...: Complete
SPECIFIC GRAVITY ......: 0.98 (Water = 1)
PH ....................: 9 - 9.5
% VOLATILES ...........: >90 %
10. STABILITY AND REACTIVITY
STABILITY:
Stable.
POLYMERIZATION:
Hazardous polymerization will not occur.
DECOMPOSITION:
In the case of a fire, oxides of carbon, hydrocarbons, fumes, and smoke
may be produced.
11. TOXICOLOGICAL INFORMATION
ETHYLENE GLYCOL MONOBUTYL ETHER
Test Code: Oral LD50
Species: Rat
Results: 470 mg/kg
12. ECOLOGICAL INFORMATION
ETHYLENE GLYCOL MONOBUTYL ETHER
Test Code: LC50 96HR
Species: Fish
Results: >100 mg/l
13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL:
Treat or dispose of waste material in accordance with all local,
state/provincial, and national requirements.
Grease & Oil Spot Remover Professional Strength Aerosol Page 5
RTN Number: 00000215 January 4, 2008
____________________________________________________________________________________________________
14. TRANSPORTATION INFORMATION
PRODUCT LABEL ..........: Grease & Oil Spot Remover Professional Strength Aero
D.O.T. SHIPPING NAME ...: Consumer commodity
D.O.T. HAZARD CLASS ....: ORM-D
MISCELLANEOUS:
See DOT Exception: 49 CFR 173.306(h).
IATA Shipping Classification:
Aerosols, flammable, 2.1, UN1950, Packaging Instructions Y203, Limited
Quantity.
IMO/IMDG Shipping Classification:
AEROSOLS (maximum 1 litre), 2.1, UN1950, Limited Quantity.
EmS Number: 2-13.
Note: See IMDG Code 3.4.
15. REGULATORY INFORMATION
REGULATORY LISTS SEARCHED:
01 = SARA TITLE III SECTION 302 02 = SARA Title III Section 313
03 = RCRA HAZARDOUS WASTE CODES 04 = CERCLA Hazardous Substances
05 = CLEAN AIR ACT 06 = California Prop. 65
EEC Symbols and Indications of Danger:
None
S-Phrases:
S15.1 - Keep away from heat and flame.
S24/25 - Avoid contact with skin and eyes.
WHMIS Hazard Symbols:
Class A - Compressed Gas
Canadian Disclosure List
ETHYLENE GLYCOL MONOBUTYL ETHER (111-76-2)
Grease & Oil Spot Remover Professional Strength Aerosol Page 6
RTN Number: 00000215 January 4, 2008
____________________________________________________________________________________________________
(section 15 continued)
MISCELLANEOUS INFORMATION:
This material or all of its components are listed on the Inventory of
Existing Chemical Substances under the Toxic Substance Control Act (TSCA).
16. OTHER INFORMATION
PREPARED BY .......: Edward Durrant
APPROVED BY .......: Dale Jensen
TITLE .............: Product Development Manager
APPROVAL DATE .....: January 4, 2008
SUPERCEDES DATE ...: January 5, 2007
RTN NUMBER ........: 00000215 (Official Copy)
**********************************************************************
This information is furnished without warranty, expressed or implied,
except that it is accurate to the best knowledge of Harris Research, Inc.
The data on this sheet are related only to the specific material
designated herein. Harris Research, Inc assumes no legal responsibility
for use or reliance upon these data.
**********************************************************************
END OF MSDS
**********************************************************************
|