Rutland Plastic Technologies, Inc
10021 Rodney Street
Pineville, NC 28134
ISO 9001:2000 and ISO 14001:2004 Registered
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
SUPPLIER'S NAME: MSDS NUMBER: 416
Screentec Corporation DATE REVISED: 12/20/2006
930 Westport Crescent DATE PRINTED: 2/28/2007
Mississauga, ON. L5T 1G1 SUPERSEDES: 1/4/2006
905.670.7042
MANUFACTURING LOCATION: HAZARDOUS MATERIAL INFORMATION SYSTEM:
Rutland Plastic Technologies, Inc.
10021 Rodney Street Health: 1
Pineville, NC 28134 Flammability: 0
704/553-0046 Reactivity: 0
Personal Protection: A
IN CASE OF EMERGENCY CONTACT: 704/553-0046
PRODUCT NAME: Rutland Screen Printing Plastisol
CHEMICAL FAMILY: Polyvinyl Chloride Dispersion
PRODUCT CODE: BD4449 HD4449 HS0153 HS4196 HS6319 M24449
HS2347 HS6328 HS7104
HS3227
MSDS Prepared by: Kimberly C. Leitch (704) 553-0046 ext. 155
2. HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENT CAS # % BY WEIGHT TLV PEL
Di (2-ethylhexyl) adipate 103-23-1 0.5 - 5% not available not available
All black screen printing plastisols contain:
3.5 mg/m 3 3.5 mg/m 3
Carbon black 1333-86-4 0.5 - 16%
3. HAZARDS IDENTIFICATION
ROUTE OF ENTRY: Skin contact, eye contact, ingestion
EMERGENCY OVERVIEW: Low hazard for normal industrial use.
MSDS 416 Page 1 of 5 2/28/2007
3. HAZARDS IDENTIFICATION (CONTINUED)
EYE CONTACT: Low hazard for normal industrial use; however, any material that contacts the eye
may cause mechanical irritation.
SKIN CONTACT: Low hazard for normal industrial use.
INGESTION: Not a likely route of exposure. Very low toxicity.
INHALATION: Not a problem at room temperature, but fumes formed at elevated temperatures
can be irritating.
4. FIRST AID MEASURES
EYES: Flush with water for 15 minutes. If irritation develops, get medical attention.
SKIN: Wash with soap and water.
INHALATION: Remove to fresh air for relief.
INGESTION: None necessary for small quantities.
5. FIRE FIGHTING MEASURES
FLASH POINT (?C): >200 (COC)
OSHA FLAMMABILITY CLASSIFICATION: None
Foam, CO2, Dry Chemical, or water mist.
EXTINGUISHING MEDIA:
SPECIAL FIRE FIGHTING PROCEDURES: Wear self contained breathing apparatus.
EXPLOSION LIMITS IN AIR - LOWER (%): Unknown UPPER (%): Unknown
HAZARDOUS COMBUSTION PRODUCTS: CO, HCl
AUTO IGNITION TEMP (?C): Unknown
UNUSUAL FIRE AND EXPLOSION HAZARDS: None
EXPLOSION DATA - SENSITIVITY TO IMPACT: None
EXPLOSION DATA - SENSITIVITY TO STATIC DISCHARGE: None
6. ACCIDENTAL RELEASE MEASURES
ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Dike to contain spill. Recover
free product. Collect remaining product with absorbent materials.
MSDS 416 Page 2 of 5 2/28/2007
7. HANDLING AND STORAGE
HANDLING: Wash thoroughly after handling.
STORAGE: Do not store near heat or flame. Material can gel with long exposure to elevated
temperatures (Above 35?C.).
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Use with adequate ventilation.
RESPIRATORY PROTECTION EQUIPMENT: Not necessary at room temperature.
PROTECTIVE GLOVES: Usually not required.
EYE AND FACE PROTECTION: Safety glasses recommended.
OTHER PROTECTIVE EQUIPMENT: Usually not required.
VENTILATION: Local exhaust as needed near processing equipment.
9. PHYSICAL AND CHEMICAL PROPERTIES
Boiling Range/Point: Solidifies before boiling. % Volatile by Weight: 0.2%-4%
Vapor Pressure: Unknown VOC (g/l): 2 - 50 g/l
Vapor Density (AIR=1): >1 Evaporation Rate: Unknown
Freezing Point: Not applicable Specific Gravity @ 25?C: 1.0 - 2.5
Physical State: Thick Liquid Weight per gallon: 9-20 lbs/gal
Color: All colors pH: Not applicable
Odor: Characteristic vinyl odor Solubility in water: Insoluble
Coefficient of water/oil distribution: Unknown
10. STABILITY AND REACTIVITY
STABILITY: Material is stable
HAZARDOUS POLYMERIZATION: Will not occur.
CO, CO2, HCl.
HAZARDOUS THERMAL DECOMPOSITION/COMBUSTION PRODUCTS:
INCOMPATIBILITY (MATERIALS TO AVOID): None
CONDITIONS TO AVOID: Storage temperatures above 95?F.
11. TOXICOLOGICAL INFORMATION
CARCINOGENICITY: This product is not listed as a carcinogen by NTP, IARC, ACGIH, or OSHA.
MSDS 416 Page 3 of 5 2/28/2007
11. TOXICOLOGICAL INFORMATION (CONTINUED)
Not available
ACUTE ORAL LD50: Not available ACUTE DERMAL LD50:
ACUTE INHALATION LC50: Not available IRRITANCY OF PRODUCT: None expected
ACUTE EXPOSURE: No effects expected SKIN SENSITIZATION: None expected
CHRONIC EXPOSURE: No effects expected RESPIRATORY SENSITIZATION: None expected
REPRODUCTIVE TOXICITY: Not applicable TERATOGENICITY: Not applicable
EMBRYOTOXICITY: Not applicable MUTAGENICITY: Not applicable
NAME OF SYNERGISTIC PRODUCTS/EFFECTS: Unknown
12. ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION: Unknown
CHEMICAL FATE INFORMATION: Unknown
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Small amounts may be fused in a vented oven and disposed of as a solid.
Disposed material is not a listed RCRA Hazardous waste.
Dispose of materials in accordance with the applicable Local, State, and Federal
regulations.
14. TRANSPORT INFORMATION
DOT SHIPPING NAME: Not regulated
DOT HAZARD CLASS: None
UN/NA NUMBER: None
DOT PACKING GROUP: None
AIR FREIGHT TRANSPORTATION: Not regulated
OCEAN TRANSPORTATION: Not regulated
TDG: Not regulated
15. REGULATORY INFORMATION
TSCA STATUS: All components of these products are on the US TSCA Inventory.
CALIFORNIA PROPOSITION 65: These products are not known to contain any chemicals known to the
state of California to cause cancer or birth defects; however, routine analysis for all listed materials is not
conducted.
MSDS 416 Page 4 of 5 2/28/2007
15. REGULATORY INFORMATION (CONTINUED)
SARA 302 EXTREMELY HAZARDOUS SUBSTANCES LIST: None
SARA (311,312) HAZARD CLASS: None
SARA SECTION 313 TOXIC CHEMICALS: None
AUSTRALIAN INVENTORY CHEMICAL SUBSTANCES: Unknown at this time.
CANADIAN INVENTORY: Di (2-ethylhexyl) adipate, Carbon black
EINECS REGULATIONS: Unknown at this time
JAPAN: Unknown at this time
KOREAN CHEMICAL INVENTORY: Unknown at this time
16. OTHER INFORMATION
DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES:
All recommendations and statements made, if any, are based on Rutland's research and experience. However, since
Rutland has no control over the conditions of use or storage of the product sold, Rutland cannot guarantee the results
obtained through the use of its products. All products are sold and samples are given without any representation or
warranty, expressed or implied, of fitness for any particular purpose or otherwise, and upon condition that the buyer
shall determine the suitability of the product for its own purposes. This applies also where protective rights of third
parties are involved. It does not release the user from the obligation to test the suitability of the product for the
intended use and application.
MSDS 416 Page 5 of 5 2/28/2007
|