HAZARD OVERVIEW
Viscous liquid, amine odor. Contains small amounts (<0.1%) of
hexavalent chromium associated with strontium chromate.
Flammable liquid, Flash Point 145癋 TCC. Prolonged or repeated
exposure may cause skin or eye irritation
Potential Health Effects
EYE: Contact may cause irritation
SKIN: Prolonged or repeated contact may cause irritation.
INGESTION: No effects of exposure expected under conditions of normal use.
INHALATION: Repeated or prolonged contact may cause irritation to respiratory system. Product contains small
amounts of hexavalent chromium.
CHRONIC (CANCER) INFORMATION): Contains small amounts of hexavalent chromium (see Section 11).
TERATOLOGY (BIRTH DEFECTS) INFORMATION: No data
REPRODUCTION INFORMATION: No data
===========================================================================================
SERMETEL 1083 PART A PAGE 1 OF 4
======================================================================================
SECTION 4 - FIRST AID MEASURES
EYES: Flush with excess water for 15 minutes. Obtain medical attention.
SKIN: Flush with excess water. Remove contaminated clothing and wash before reuse.
For severe exposure obtain medical attention.
INGESTION: Obtain medical attention.
INHALATION: Remove to fresh air. Obtain medical attention.
======================================================================================
SECTION 5 - FIRE FIGHTING MEASURES
FIRE FIGHTING INSTRUCTIONS: Wear suitable protective clothing and supplied air respirator.
======================================================================================
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Eliminate sources of ignition. Absorb onto inert nonflammable absorbent.
LARGE SPILL: N/A
======================================================================================
SECTION 7 - HANDLING AND STORAGE
HANDLING: Use with adequate ventilation. Avoid contact with skin.
STORAGE: Store in original containers at 35-45oF. Shelf life is six (6) months. Pot life of mixed coating is 48
hours.
======================================================================================
SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Apply in spray booth with adequate ventilation.
RESPIRATORY PROTECTION: For spray application, use of NIOSH/MSHA approved respirator is
recommended.
SKIN PROTECTION: Handle with solvent resistant rubber gloves.
EYE PROTECTION: Wear suitable approved goggles or glasses.
======================================================================================
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
SERMETEL 1083 PART A PAGE 2 OF 4
Solubility in water: Resin precipitates
Specific gravity: approx. 1.35
% volatile (volume): 65%
VOC content: 6.2 lbs/gln (744 gm/L) (voc of mixed coating is 6.27 lbs/gal (752gm/L))
======================================================================================
SECTION 10 - STABILITY AND REACTIVITY
CHEMICAL STABILITY: (CONDITIONS TO AVOID) Stable
INCOMPATIBILITY: Contact with water will precipitate resin.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition may yield oxides of carbon and nitrogen.
HAZARDOUS POLYMERIZATION: Will not occur.
======================================================================================
SECTION 11 - TOXICOLOGICAL INFORMATION
SKIN: Dermal toxicity (Rabbit LD50) for NMP is 8000mg/kg
INGESTION: Oral toxicity (Rat LD50) for NMP is 4200 mg/kg
INHALATION: No data developed
SUBCHRONIC: No information
CHRONIC / CARCINOGENICITY: Compounds containing hexavalent chromium are listed on the following:
IARC - Human Carcinogen NTP - Known Human Carcinogen
TERATOLOGY: No data
REPRODUCTION: No data
MUTAGENICITY: No data
======================================================================================
SECTION 12 - ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION: No data
CHEMICAL FATE INFORMATION: No data
======================================================================================
SECTION 13 - DISPOSAL CONSIDERATIONS
Waste residues are considered hazardous. Dispose of in accordance with all applicable local, state, and federal
regulations.
======================================================================================
SECTION 14 - TRANSPORT INFORMATION
Proper Shipping Name: High temperature coating, not regulated.
Hazard Rating (DOT Class): Not regulated.
======================================================================================
SECTION 15 - REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS:
OSHA: This material is considered hazardous per OSHA Hazard Communication Rule, 29CFR
1910.1200
TSCA: The ingredients of this product are all on the TSCA Inventory
SERMETEL 1083 PART A PAGE 3 OF 4
SECTION 313:
HAZARDOUS INGREDIENTS IDENTIFIED IN THE SEC 313 COLUMN OF SECTION 1 ARE TOXIC
CHEMICALS SUBJECT TO THE REPORTING REQUIREMENTS OF SECTION 313 OF THE EMERGENCY
PLANNING AND COMMUNITY RIGHT-TO-KNOW ACT OF 1986 AND OF 40CFR372. THIS INFORMATION
MUST BE INCLUDED IN ALL MSDS'S THAT ARE COPIED AND DISTRIBUTED FOR THIS MATERIAL.
STATE REGULATIONS:
CALIFORNIA PROPOSITION 65 WARNING: This product contains strontium chromate, a chemical
known to the state of California to cause cancer.
INTERNATIONAL REGULATIONS:
CANADIAN WHMIS: Class B Division 3 (combustible liquid)
CANADIAN ENVIRONMENTAL PROTECTION ACT (CEPA): All ingredients of this product are on the
Domestic Substance List (DSL) and are acceptable for use under the provisions of CEPA.
UK CLASSIFICATION FOR SUPPLY: Not regulated
R36/38: Irritating to eyes and skin
S24/25: Avoid contact with skin and eyes
======================================================================================
SECTION 16 - OTHER INFORMATION
SermeTel 1083 Part A is a high temperature polymer coating intended for use in coating systems where corrosion,
chemical, and/or anti-fouling resistance is a requirement.