Date of Issue: 26/5/2009
MSDS No.: Q54-1300B
Material Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name : Daily Maintenance Kit(Wipe Cleaning)
Product Code : IP6-108
-Application model : IP-6600/IP-6900
Manufacturer's
Seiko I Infotech Inc.
Name:
Quality Assurance Department
Address : 563, Takatsuka-Shinden, Matsudo-shi, Chiba, 270-2222, Japan
Telephone Number : +81-47-391-2349
Fax Number : +81-47-391-0952
2. HAZARD IDENTIFICATION
Classification : Harmful preparation.
Route of entry: Inhalation, Ingestion, and Skin.
Harm to health: Contact with eyes may result in irritation.
Contact with skin may result in irritation.
Ingestion may result in gastric disturbance.
Prolonged or repeated inhalation of vapor may cause headaches,
dizziness or nausea.
Harm to ecological: No information available.
Risk of combustion The vapor is heavier than air. Vapors or gases may ignite at
and explosion: distant ignition sources and flash back. Vapor/air mixtures is
explosive.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Content Symbols & R-
Main Ingredients CAS No.
(%) phrases
Ethylene glycol monobutyl ether
90-100 112-07-2 Xn ; R20/21
acetate
N-Methyl pyrrolidone <5 872-50-4 ; 36/38
4. FIRST AID MEASURES
Skin Contact: In case of contact, immediately wash skin with soap and plenty of water. If
irritation develops, get medical attention. Remove contaminated clothing and
shoes.
Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15
minutes. If irritation develops, get medical attention.
Inhalation : Move to fresh air area. Call a physician.
Ingestion : If swallowed, seek medical advice immediately.
Further Medical None
Treatment:
5. FIRE FIGHTING MEASURES
Hazardous properties: Volatility is high and easy to ignite.
The volatiled gas may catch fire by a distance ignition source.
Must be kept away from flame or spark.
Suitable extinguishing media: Foam, CO2, Dry chemicals and Water spray.
Not to be used extinguishing media: Water (Jet)
Hazardous decomposition products: Burning in insufficient air supply may produce toxic fume
of carbon monoxide.
Protective equipment for Fire Fire fighters should wear self-contained breathing
fighters: apparatus to avoid inhalation of smoke and vapors.
6. ACCIDENTIAL RELEASE MEASURES
Shut off all sources of ignition or open flame. Keep public away. For small spills, scrape
spilled materials with disposal towels or dry sand. For large spills, dike and cover liquid
with foam. Take up the spill by a plastic tool and put in a sealable container. Prevent
spills from entering sewers, watercourses or low areas to avoid pollution.
7. HANDLING AND STORAGE
Handling: Do not handle or store near an open flame, sources of heat or sources of
ignition. Use only in the well-ventilated areas and wear proper protective
equipment to avoid skin contact, eye contact and vapor inhalation.
Storage: Store containers in a cool and dark place. Keep containers closed.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure limits:
Ethylene glycol monobutyl ether acetate ACGIH (TWA) :20ppm
N-Methyl pyrrolidone ACGIH (TWA) :Not established
Engineering controls: Use local exhaust ventilation.
Respiratory protection: Respirator to avoid breathing organic solvent vapor.
Hand protection: Wear chemical resistant gloves
Eye protection: Use safety glasses or goggles.
Skin protection: Wear working clothes
Other protection: No smoking, No eating and No drinking at the work place.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Colorless transparence liquid
Odor: solvent odor.
>191oC (Ethylene glycol monobutyl ether acetate)
Boiling point:
>-64,6oC (Ethylene glycol monobutyl ether acetate)
Melting point:
74.0oC (Tag closed cup)
Flash point:
270oC(N-Methyl pyrrolidone)
Auto ignition temperature:
Flammable limit: Lower 0.8vol%( Ethylene glycol monobutyl ether acetate)
Upper 8.5vol%( Ethylene glycol monobutyl ether acetate)
0,96-1.00g/cm3(25oC)
Specific gravity:
<40 Pa (20oC) ( Ethylene glycol monobutyl ether acetate)
Vapor pressure:
Vapor density: >3.4 (N-Methyl pyrrolidone) (Air=1)
Solubility in water:
1,1 wt% (20oC) ( Ethylene glycol monobutyl ether acetate)
In Water:
Easily soluble (N-Methyl pyrrolidone)
1,6 wt% (20oC) ( Ethylene glycol monobutyl ether acetate)
in :
10. STABILITY AND REACTIVITY
Stability: Stable
Materials to avoid : Acids and oxidizing agents
Conditions to avoid: Extremely high temperature
Hazardous reactions: Not occur
Decomposition products: No data
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
2,400mg/kg1
Ethylene glycol monobutyl ether acetate Oral Toxicity LD50( rat )
LD50(rabbit) 1,500mg/kg1
Skin Toxicity
4,200mg/kg2
N-Methyl pyrrolidone Oral Toxicity LD50( rat )
LD50(marmot) >8,000mg/kg2
Skin Toxicity
Carcinogenicity: N-Methyl pyrrolidone: Shows negative result on the following exposure test.
Inhalation (rat) 0mg/L(0ppm), 0.04mg/L(10ppm), 0.4mg/L(99ppm), 6hr/d,
5d/w, 2years
Mutagenicity: No information available.
Other toxicity information: No information available.
12. ECOLOGICAL INFORMATION
Environmental fate and distribution: This product is partially soluble in water. Treat using the
best available techniques to avoid environmental contamination.
Toxicity: No information available.
Effect on effluent treatment: No data.
13. DISPOSAL CONSIDERATIONS
Comply with all federal, state and local regulations.
Do not dump this product into sewers, on the ground or into
any body of water.
14. TRANSPORT INFORMATION
UN CLASS: Not applicable
UN NUMBER: Not applicable
PACKING GROUP: Not applicable
PROPER SHIPPING NAME: Ink
Classification: This product is not classified as hazardous for transport.
Follow all regulations in your country.
15. REGULATORY INFORMATION
All ingredients in this product are listed on the EINECS or exempt from listing.
Classification: Harmful preparation.
Indication of danger: Harmful
Symbols of danger: Xn
R-phrase: R20/21 Harmful by inhalation and in contact with skin.
R36/38 Irritating to eyes and skin.
S-phrase: S24 Avoid contact with skin
S41 In case of fire and/or explosion do not breathe fumes.
Follow all regulations in your country
16. OTHER INFORMATION
This data sheet was prepared in accordance with directive 2001/58/EEC.
The above information relates only to the safety of the products designated based on our
current state of knowledge. No responsibility is accepted for any error or omissions.
Reference
1) Clayton and Clayton,Patty's industrial Hygiene and Toxicology 4th Edition(The Japanese
Version)
2) N-Methyl pyrrolidone Material Safety Data Sheet
History
Date of issue: 26-5-2009
Version : 2
|