MATERIAL SAFETY DATA SHEET
in accordance with 91/155/EEC
1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
601 Chain Drive Pin & Bushing Lubricant (Bulk)
Product Name:
12 March 2003 108B-14
Date of Preparation: MSDS No.
Not classified as hazardous according to criteria of Worksafe Australia.
Company: Supplier:
A.W. CHESTERTON COMPANY
225 Fallon Road
Stoneham, MA 02180-2999, USA
Tel.: 781-438-7000
(Mon. - Fri. 8:30 - 5:00 PM EST)
For Chemical Emergency:
24 hours per day, 7 days per week
Call Infotrac: 1-800-535-5053
Outside N. America: 352-323-3500 (collect)
Petroleum base lubricant
Use:
2. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Ingredients % Wt. CAS No. EC No. Symbol R-phrases
Oxo-Alcohol Acetic Acid Ester 5-10 108419-35-8 283-740-9 ? ?br>
N-Methyl-2-Pyrrolidone 1-5 872-50-4 212-828-1 Xi 36/38
Other Ingredients:
Distillates (Petroleum), Hydrotreated 70-80 64742-53-6 265-156-6 ? ?br>
Naphthenic+ 64742-52-5 265-155-0
See section 15 for labelling R-phrases and section 16 for others. +Contains less than 3 % DMSO extract as measured by IP 346.
3. HAZARDS IDENTIFICATION
Direct eye contact may cause eye irritation. High vapor concentration can cause eye and respiratory irritation, headache and
dizziness. Prolonged or repeated skin contact may defat the skin and cause skin irritation.
4. FIRST AID MEASURES
Remove to fresh air. If not breathing, administer artificial respiration. Contact physician.
Inhalation:
Wash skin with soap and water. Contact physician if irritation persists.
Skin Contact:
Flush eyes for at least 15 minutes with large amounts of water. Contact physician if irritation persists.
Eye Contact:
Do not induce vomiting. Contact physician immediately.
Ingestion:
Treat symptoms.
Advice to Physician:
A.W. Chesterton Co., 2003 All Rights Reserved.
C l a s s i f i e d a c c o r d i n g t o : * 29 CFR 1910.1200, 1915, 1916, 1917
Reg. US Patent and TM Office * Mass. Right-to-Know Law (ch. 40, M.G.L..O. 111F)
* Canadian WHMIS regulations
* 67/548/EEC (28th Adaptation) and 99/45/EC
* Worksafe Australia [NOHSC: 1008 (1999)]
P a ge 1 o f 4
999-10505-0603
Product: 601 Chain Drive Pin & Bushing Lubricant (Bulk)
Date: 12 March 2003 MSDS No.: 108B-14
5. FIRE FIGHTING MEASURES
Carbon Dioxide, dry chemical or foam
Extinguishing Methods:
none
Unusual Fire and Explosion
Hazards:
Cool exposed containers with water. Recommend Firefighters wear self-contained
Special Fire Fighting Measures:
breathing apparatus.
?br>
Flammability Classification:
HAZCHEM Emergency Action Code: 3 Z
6. ACCIDENTAL RELEASE MEASURES
Evacuate area. Provide adequate ventilation. Utilize exposure controls and personal
Personal Precautions:
protection as specified in Section 8.
Keep out of sewers, streams and waterways.
Environmental Precautions:
Contain spill to a small area. Pick up with absorbent material (sand, sawdust, clay,
Methods of Clean Up:
etc.) and place in a suitable container for disposal.
7. HANDLING AND STORAGE
Utilize exposure controls and personal protection as specified in Section 8.
Handling:
Keep container closed when not in use. Store in a cool, dry area.
Storage:
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Hazardous Ingredients OSHA ACGIH TLV AUSTRALIA
mg/m3 mg/m3 mg/m3
ppm ppm ppm
Oxo-Alcohol Acetic Acid Ester * * *
Oil Mist, Mineral ? 5 ? 5 ? 5
STEL
10
N-Methyl-2-Pyrrolidone ** ** **
*Chesterton recommended limit: 50 ppm. **Chesterton recommended limit: 100 ppm.
Not normally needed. If exposure limits are exceeded, use approved organic vapor respirator.
Respiratory Protection:
No special requirements. If exposure limits are exceeded, provide adequate ventilation.
Ventilation:
Chemical resistant gloves (e.g., rubber, nitrile). If required, use rubber or neoprene.
Protective Gloves:
Safety goggles or glasses.
Eye Protection:
Impervious gloves and clothing as necessary for repetitive, prolonged contact with liquid.
Other:
A.W. Chesterton Co., 2003 All Rights Reserved. Reg. US Patent and TM Office P age 2 o f 4
Product: 601 Chain Drive Pin & Bushing Lubricant (Bulk)
Date: 12 March 2003 MSDS No.: 108B-14
9. PHYSICAL AND CHEMICAL PROPERTIES
low viscosity liquid petroleum odor
Physical state Odour
?br>
amber not determined
Colour Vapour pressure @ 20癈
220癈 (428癋) < 1%
Initial boiling point % Aromatics by weight
not determined not applicable
Melting point pH
9% 0,9 kg/l
% Volatile (by volume) Density
118癈 (245癋) 7.5 lbs/gal.
Flash point Weight per volume
PM Closed Cup <1
Method Coefficient (water/oil)
28 cps @ 25癈 >1
Viscosity Vapour density (air=1)
not determined <1
Autoignition temp. Rate of evaporation (ether=1)
not determined slightly soluble
Explosion limits Solubility in water
none
Other
10. STABILITY AND REACTIVITY
Stable
Stability:
Will not occur.
Hazardous Polymerization:
Carbon Monoxide, Carbon Dioxide and other toxic fumes.
Hazardous Decomposition Products:
Open flames and red hot surfaces.
Conditions to Avoid:
Caustics, strong oxidizers like liquid Chlorine and concentrated Oxygen.
Materials to Avoid:
11. TOXICOLOGICAL INFORMATION
Inhalation, skin and eye contact.
Primary Route of Exposure Under
Normal Use:
Direct eye contact causes eye irritation. High vapor concentration can cause eye and
Acute Effects:
respiratory irritation, headache and dizziness.
Prolonged or repeated skin contact may defat the skin and cause skin irritation.
Chronic Effects:
As per 29 CFR 1910.1200 (Hazard Communication), this product contains no
Other Information:
carcinogens as listed in the National Toxicology Program (NTP), the International
Agency for Research on Cancer (IARC) or the Occupational Safety and Health
Administration (OSHA).
12. ECOLOGICAL INFORMATION
Ecotoxicological data have not been determined specifically for this product. The information given below is based on a
knowledge of the components and the ecotoxicology of similar substances.
Low viscosity liquid. Solubility in water: negligible. In determining environmental mobility, consider the
Mobility:
product's physical and chemical properties (see Section 9). Oil products, improperly released to the
environment, can cause ground and water pollution. N-Methyl-2-Pyrrolidone: expected to have very high
mobility in soils.
Oil: not readily biodegradable. N-Methyl-2-Pyrrolidone: oxidizes rapidly by photochemical reactions in
Degradability:
air and water; may biodegrade.
Oil: not expected to bioaccumulate. N-Methyl-2-Pyrrolidone: low potential for bioaccumulation
Accumulation:
not determined
Ecotoxicity:
13. DISPOSAL CONSIDERATIONS
Incinerate absorbed material with a properly licensed facility. Free product should be incinerated or may be amenable to fuels
blending. Check local, state and national/federal regulations and comply with the most stringent requirement.
13 02 02
EWC-code:
A.W. Chesterton Co., 2003 All Rights Reserved. Reg. US Patent and TM Office P age 3 o f 4
Product: 601 Chain Drive Pin & Bushing Lubricant (Bulk)
Date: 12 March 2003 MSDS No.: 108B-14
14. TRANSPORT INFORMATION
NONHAZARDOUS, NOT REGULATED
TDG: U.S. DOT :
Shipping Name: NONHAZARDOUS
NONHAZARDOUS, NOT REGULATED
IMDG:
Hazard Class: NOT REGULATED
UN/NA # : NOT APPLICABLE
NONHAZARDOUS, NOT REGULATED
IATA/ICAO:
Packaging Group # NOT APPLICABLE
NONHAZARDOUS, NOT REGULATED
ADR/RID:
Emergency Response Guide Book No. - NOT
APPLICABLE
15. REGULATORY INFORMATION
European Classification: none
none
R-Phrase(s):
?br>
S-Phrase(s):
none
Name of the substances on the
label:
none
Other labelling information:
D2B: Toxic materials causing other effects
Canadian Classification:
May irritate eyes and skin.
Risk Phrase(s):
Wear eye protection. Avoid contact with skin.
Precautionary and First Aid
Measure(s): In case of contact with eyes, rinse with plenty of water and seek medical advice.
none
Other labelling information:
16. OTHER INFORMATION
US EPA SARA TITLE III Hazardous Materials Identification System (HMIS)
4 = Severe Hazard
312 Hazards : 313 Chemicals : 1
HEALTH
3 = Serious Hazard
FLAMMABILITY 1
Immediate N-Methyl-2-Pyrrolidone 1-5% 2 = Moderate Hazard
1 = Slight Hazard REACTIVITY 1
0 = Minimal Hazard
Personal Protection *
* = See Section 8
JAPAN PRTR Class I Chemicals : Class II Chemicals :
none none
R36/38: Irritating to eyes and skin.
Risk phrases in section 2:
sections 2, 9, 12, 16; reformulation.
Changes to the MSDS in this revision:
This information is based solely on data provided by suppliers of the materials used, not on the mixture itself. No warranty is
expressed or implied regarding the accuracy of the data or the suitability of the product for the user's particular purpose. The
user must make their own determination as to suitability.
A.W. Chesterton Co., 2003 All Rights Reserved. Reg. US Patent and TM Office P age 4 o f 4
|