Phone: 205/424-2772
HUDCO Industrial Products
800/247-9908
3100 Morgan Road
Fax: 205/425-4011
Bessemer, AL 35022
MATERIAL SAFETY DATA SHEET
MSDS Revision Date: 3/10/00
Product Name: Formula 4000 - Resin
Epoxy Resin
Synonyms:
1. Hazardous In redients:
ACGIH TLV CAS #
Ingredient %W/W OSHA
PEL
N/E 25068-38-6
Bisphenol A / Epichlorohydrin 10-20 N/E
N/E 28064-14-4
0-10 N/E
Bisphenol F
N/E N/A
Hydrocarbon Resin 0-10 N/E
N/E N/A
Rheological Additive 0-10 N/E
N/E Mixture
Inorganic Fillers 70-80 N/E
2. Physical Data:
White
Boiling Point: N/A Color:
Thick, Gritty Paste
N/A Appearance:
Vapor Pressure:
Odor: Sweet
Vapor Density: N/A
Not Applicable
Solubility in Water: Insoluble Physical State:
a, / 4.
Specific Gravity:
3. Fire and Explosion Hazard Data:
Flash Point: >200癋
Flammable Limits-
LFL: N/A
UFL: N/A
Extinguishing Media: Water spray, C02, dry chemical, foam
Fire Fighting Equipment: Water or foam may cause frothing which can be violent and
life threatening if sprayed directly into burning liquid. Use
self contained breathing apparatus with full face piece. Use
full bunker gear.
4. Reactivity Data:
Stable
Stability:
Condition to Avoid: Extreme Heat
Strong oxidizing agents, acids, bases, and amines.
Materials to Avoid:
When product burns, may form toxic materials, carbon
Hazardous Products:
dioxide and carbon monoxide, aldehydes, various
hydrocarbons, etc.
Page 1 of 2
HUDCO Industrial Products Formula 4000 - Resin
MATERIAL SAFETY DATA SHEET
5. Environmental and Disposal Information:
Spills/Leaks: Scrape or wipe up with suitable material for disposal. Flush
contaminated area with water.
Disposal Method: Deposit in landfill in accordance with all local, state, and
federal regulations or incinerate in accordance with local
pollution regulations.
6. Health Hazard Data:
Eye: May cause eye irritation
Skin Contact: May cause sensitization, reddening, irritation, dermatitis after
prolonged or repeated exposure.
Ingestion: May be slightly toxic.
Inhalation: No adverse affects anticipated. Irritation may be caused if
product is above room temperature.
Chronic Effects: Preexisting eye, skin and respiratory conditions may be
aggravated.
7. First Aid:
Eye: Flush eyes with water for 15 minutes and contact physician.
Skin Contact: Remove contaminated clothing. Wash with soap and water.
Ingestion: Seek medical attention if large amounts are swallowed.
Inhalation: Remove to fresh air. Provide oxygen if necessary. Contact
physician if adverse effects occur.
8. Handling Precautions:
Exposure Guidelines: None established.
Ventilation: General mechanical ventilation. Exhaust required for
application in confined areas.
Respiratory Protection: Not ordinarily required, unless grinding, machining or burning
of product is necessary. Use organic respirator to avoid
breathing mists or vapors from product at elevated
temperature.
Protective Equipment: Coveralls or work clothes covering skin, rubber gloves.
9. Comments:
The information accumulated herein is believed to be accurate but is not warranted to
be accurate. Recipients are advised to confirm in advance of need that the information
i s current and applicable to their circumstances.
Note to Physician: This product is made from pre-manufactured components. Please
contact HUDCO for the manufacturers MSDS on each component in the event of an
emergency.
MSDS Revision Date: 3/10/0 0 Page 2 of 2
HUDCO Industrial Products Phone: 205/424-2772
3100 Morgan Road 800/247-9908
Bessemer, AL 35022 Fax: 205/425-4011
MATERIAL SAFETY DATA SHEET
Product Name: Formula 4000 - Hardener MSDS Revision Date: 3/10/00
Synonyms: Curing Agent
1. Hazardous In redients:
Ingredient %W/W OSHA PEL ACGIH TLV CAS #
Amido Amine 0-10 N/E N/E Secret <82%
111-40-0 N/A
80-05-7 <10%
112-57-2 <10%
Aliphatic Amine 0-10 N/E N/E 111-40-0 >50%
80-05-7 <50%
Aliphatic Amine 0-10 N/E N/E 90-72-2
Nonylphenol 0-10 N/E N/E 84852-15-3
Inorganic Fillers 50-60 N/E N/E Mixture
2. Physical Data:
Boiling Point: N/A Color: Black
Vapor Pressure: N/A Appearance: Thick, Gritty Paste
Vapor Density: N/A Odor: Ammonia
Solubility in Water: Moderate Physical State: Not Applicable
;.O3
Specific Gravity:
3. Fire and Explosion Hazard Data:
Flash Point: >200癋
Flammable Limits-
LFL: N/A
UFL: N/A
Extinguishing Media: Water fog, C02, dry chemical, foam
Fire Fighting Equipment: Water or foam may cause frothing which can be violent and
life threatening if sprayed directly into burning liquid. Use
self contained breathing apparatus with full face piece and
full bunker gear with butyl rubber boots, gloves and suit.
4. Reactivity Data:
Stability: Stable
Condition to Avoid: Extreme Heat
Materials to Avoid: Strong oxidizing agents, mineral acids, mineral bases, organic
acids, organic bases, aliphatic amines, sodium or calcium
hypochlorites, and peroxides.
Hazardous Products: When product burns, may form toxic materials, carbon
dioxide and carbon monoxide, ammonia, nitrogen oxides
various hydrocarbons, etc.
Page 1 of 2
HUDCO Industrial Products Formula 4000 - Hardener
MATERIAL SAFETY DATA SHEET
5. Environmental and Disposal Information:
Spills/Leaks: Scrape or wipe up with suitable material for disposal. Flush
contaminated area with water.
Disposal Method: Deposit in landfill in accordance with all local, state, and
federal regulations or incinerate in accordance with local
pollution regulations.
6. Health Hazard Data:
Eye: Corrosive to eyes, may cause severe damage. Vapors may
irritate eyes.
Skin Contact: Corrosive to the skin. May cause sensitization. May be toxic
if absorbed through skin.
Ingestion: Product is corrosive to mouth, throat, and stomach.
Moderately toxic if swallowed.
Inhalation: Vapors can be corrosive to respiratory system.
Chronic Effects: Repeated exposures are not anticipated to cause significant
adverse effects. Some medical conditions may be aggravated
by exposure (Asthma, Bronchitis, Emphysema, Eye disease,
li ver disorders, and allergies). Contains materials that may
be carcinogenic.
7. First Aid:
Eye: Flush eyes with water for 15 minutes and contact physician.
Skin Contact: Remove contaminated clothing. Wash with soap and water.
Ingestion: Seek medical attention.
Inhalation: Remove to fresh air. Provide oxygen if necessary. Contact
physician if adverse effects occur.
8. Handling Precautions:
Exposure Guidelines: None established.
Ventilation: General mechanical ventilation. Exhaust required for
application in confined areas.
Respiratory Protection: Not ordinarily required unless grinding, machining or burning
of product is necessary. Required if working with product at
elevated temperatures.
Protective Equipment: Coveralls or work clothes covering skin, rubber gloves.
9. Comments:
The information accumulated herein is believed to be accurate but is not warranted to
be accurate. Recipients are advised to confirm in advance of need that the information
i s current and applicable to their circumstances.
Note to Physician: This product is made from pre-manufactured components. Please
contact HUDCO for the manufacturers MSDS on each component in the event of an
emergency.
MSDS Revision Date: 3/10/ 0 0 Page 2 of 2
|