MATERIAL SAFETY DATA SHEET
(This MSDS complies with 29 CFR 1910.1200)
Product Name: BC 5003 Epoxy Laminating-Hardener BCC PRODUCTS, INC. HMIS
Product Class: Amine curing agent 2140 Earlywood Drive H-3
Issue Date: 06/26/08 P.O. Box 327 F-1
Approved By: Roger D. Brunette Franklin, IN 46131 R-0
317-736-4090 P-H
24 HOUR EMERGENCY NO. 1-800-424-9300 CHEMTREC
SECTION 1 - HAZARDOUS INGREDIENTS
Chemical Name Wt. % OSHA (PEL) ACGIH (TLV) CAS NO.
(optional)
Diethylene Triamine 1 ppm 1 ppm. 111-40-0
P'P'-Isopropylidene Diphenol (Bisphenol A) N.E. N.E. 80-05-7
SECTION 2 - PHYSICAL DATA
Boiling Point: N.D.A. Specific Gravity (H20=1): 1.08
Vapor Pressure (mm Hg): N.D.A. Vapor Density (Air = 1): N.D.A.
Solubility in Water: Moderate Reactivity in Water: Negligible
Appearance and odor: Amber; Amine odor.
SECTION 3 - FIRE AND EXPLOSION HAZARD
Flash Point: 222?F Flammable Limit: LEL: 2%
Method Used: PMCC UEL: 6.7%
(In Air % by volume)
Auto Ignition Temperature: N.D.A.
Extinguishing Media: Carbon Dioxide, dry chemical, chemical foam, water spray.
Fire & Explosion Hazards: Decomposition and combustion products may be toxic.
Fire Fighting Procedures: Fire fighters must wear self-contained breathing apparatus to protect
against toxic and irritating vapors. Full protective clothing should also
be worn.
SECTION 4 - REACTIVITY DATA
Stability (Conditions to avoid): Stable.
Incompatibility (Materials to avoid): Strong acids, peroxides and other oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide from incomplete burning.
Hazardous Polymerization (Materials to avoid): Will not occur.
N.E. - Not Established N.D.A. - No Data Available N.A. - Not Applicable
BC 5003 Epoxy Laminating -Hardener - Page 2
SECTION 5 - ENVIRONMENTAL AND DISPOSAL INFORMATION
Spill: Using recommended protective equipment, take up with absorbent material. Dike to
contain. Flush area with 5% acetic acid.
Disposal: Use approved incineration in accordance with federal, state and local environmental
regulations. Material must be disposed of in approved landfill.
SECTION 6 - HEALTH AND FIRST AID INFORMATION
Routes of Entry FIRST AID
Inhalation: Remove victim to uncontaminated area, administer oxygen if necessary. Seek medical
attention.
Eyes: Flush with water for 15 minutes. Seek medical attention.
Skin: Remove contaminated clothes and wash affected areas with soap and water. Seek
medical attention.
Ingestion: DO NOT Induce vomiting. Drink large quantity of milk. Seek medical attention.
Chronic: Repeated, excessive exposure may cause sensitization.
Potential Carcinogen: NTP (National Toxicology Program): No IARC (Monographs): No OSHA: No
SECTION 7 - SPECIAL HANDLING & STORAGE PRECAUTIONS
Should be stored in a ventilated storage area between 70-80 ?F. Avoid excessive temperatures. Do not
store in direct sunlight. Keep away from oxidizing agents and open flame.
SECTION 8 - SPECIAL PROTECTION INFORMATION
Respiratory Protection: Use NIOSH approved respirator, with organic vapor cartridges.
Ventilation: Local exhaust.
Eye Protection: Fitted chemical goggles, or safety glasses.
Personal Protection: Rubber gloves, boots and rubber apron to avoid skin contact. Contaminated
clothing or equipment should be cleaned or disposed of, after use.
Hygienic Practices: Educate and train employees on safe use of product. Shower and eye wash
station should be available.
TSCA: This product or its components are listed in or exempt from the TSCA inventory requirements. This product
contains the following substances subject to export notification under Section 12 (b) of TSCA: None
The information contained herein is, to the best of BCC Products, Inc. knowledge and belief, accurate. However, since the conditions
of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of
this material. It is the responsibility of the user to comply with all applicable federal, state, and local laws and regulations.