3M MATERIAL SAFETY DATA SHEET COMPUBLEND(tm) II NEUTRAL CLEANER CONCENTRATE 1:63 10/23/2002
Material Safety Data Sheet
Copyright, 2002, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: COMPUBLEND(tm) II NEUTRAL CLEANER CONCENTRATE 1:63
MANUFACTURER: 3M
DIVISION: Commercial Care Division
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 10/23/2002
Supercedes Date: 10/15/2002
Document Group: 11-3239-8
Product Use:
Specific Use: Cleaner
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
WATER 7732-18-5 60 - 90
ALCOHOLS, C12-14, ETHOXYLATED PROPOXYLATED 68439-51-0 5 - 10
1-METHOXY-2-PROPANOL 107-98-2 5 - 10
2-BUTOXYETHANOL 111-76-2 1- 5
SODIUM OCTYL SULFONATE 5324-84-5 1- 5
ACRYLIC ACID, POLYMERS 9003-01-4 1- 5
EDTA TETRASODIUM SALT 64-02-8 1- 5
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: Clear light blue, citrus scent
General Physical Form: Liquid
Immediate health, physical, and environmental hazards:
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
Skin Contact:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
May be absorbed through skin and cause target organ effects.
Page 1 of 6
3M MATERIAL SAFETY DATA SHEET COMPUBLEND(tm) II NEUTRAL CLEANER CONCENTRATE 1:63 10/23/2002
Inhalation:
May be absorbed following inhalation and cause target organ effects.
Single exposure, above recommended guidelines, may cause:
Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness,
and nose and throat pain.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.
Chemical (Aspiration) Pneumonitis: Signs/symptoms may include coughing, gasping, choking, burning of the mouth, difficulty
breathing, bluish colored skin (cyanosis), and may be fatal.
Target Organ Effects:
Single exposure, above recommended guidelines, may cause:
Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination,
nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get medical attention.
Skin Contact: Immediately flush skin with large amounts of water. If signs/symptoms develop, get medical attention.
Inhalation: If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist, get medical attention.
If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give
anything by mouth to an unconscious person. Get immediate medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
No Data Available
Autoignition temperature
> 200 篎
Flash Point
No Data Available
Flammable Limits - LEL
No Data Available
Flammable Limits - UEL
Class IIIB Combustible Liquid
OSHA Flammability Classification:
5.2 EXTINGUISHING MEDIA
Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective clothing, including helmet, self-contained, positive pressure or pressure
demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for
exposed areas of the head.
Unusual Fire and Explosion Hazards: Non-flammable: ordinary combustible material.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
Page 2 of 6
3M MATERIAL SAFETY DATA SHEET COMPUBLEND(tm) II NEUTRAL CLEANER CONCENTRATE 1:63 10/23/2002
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Ventilate the area with fresh air. Contain spill. Working from around the edges of the spill
inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it
appears dry. Collect as much of the spilled material as possible. Clean up residue with water. Place in a closed container approved
for transportation by appropriate authorities. Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid eye contact with vapors, mists, or spray. Avoid skin contact. Avoid breathing of vapors, mists or spray. Do not eat, drink or
smoke when using this product. Wash exposed areas thoroughly with soap and water. Keep out of the reach of children.
7.2 STORAGE
Store under normal warehouse conditions.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Use in a well-ventilated area.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray. The following eye protection(s) are recommended: Safety Glasses with side shields.
8.2.2 Skin Protection
Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure
assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Butyl Rubber, Neoprene, Nitrile Rubber.
8.2.3 Respiratory Protection
Avoid breathing of vapors, mists or spray.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
1-METHOXY-2-PROPANOL ACGIH TWA 100 ppm
1-METHOXY-2-PROPANOL ACGIH STEL 150 ppm
1-METHOXY-2-PROPANOL OSHA TWA 100 ppm Table Z-1A
1-METHOXY-2-PROPANOL OSHA STEL 150 ppm Table Z-1A
2-BUTOXYETHANOL ACGIH TWA 20 ppm
2-BUTOXYETHANOL OSHA TWA, 25 ppm Skin Notation*
Vacated
2-BUTOXYETHANOL OSHA TWA 50 ppm Skin Notation*; Table Z-1
* Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous
membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter
Page 3 of 6
3M MATERIAL SAFETY DATA SHEET COMPUBLEND(tm) II NEUTRAL CLEANER CONCENTRATE 1:63 10/23/2002
skin absorption.
VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check with your local
regulatory agency.
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Clear light blue, citrus scent
Odor, Color, Grade:
Liquid
General Physical Form:
No Data Available
Autoignition temperature
> 200 篎
Flash Point
No Data Available
Flammable Limits - LEL
No Data Available
Flammable Limits - UEL
Approximately 212 篎
Boiling point
No Data Available
Density
No Data Available
Vapor Density
No Data Available
Vapor Pressure
Approximately 1 [Ref Std: WATER=1]
Specific Gravity
9.7
pH
Not Applicable
Melting point
Complete
Solubility in Water
No Data Available
Evaporation rate
10 - 20 % [Test Method: calculated per CARB title 2]
Volatile Organic Compounds
70 - 100 %
Percent volatile
440 - 470 g/l [Test Method: calculated per CARB title 2]
VOC Less H2O & Exempt Solvents
<=100 centipoise
Viscosity
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: None known
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Oxides of Sulfur During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
Page 4 of 6
3M MATERIAL SAFETY DATA SHEET COMPUBLEND(tm) II NEUTRAL CLEANER CONCENTRATE 1:63 10/23/2002
ECOTOXICOLOGICAL INFORMATION
CHEMICAL FATE INFORMATION
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Discharge spent solutions and small quantities (less than 5 gal.(19 L)) to a wastewater treatment system.
Reduce discharge rate if foaming occurs. As a disposal alternative, dispose of waste product in a facility permitted to accept chemical
waste.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes
Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):
Ingredient C.A.S. No % by Wt
2-BUTOXYETHANOL (GLYCOL ETHERS) 111-76-2 1- 5
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 2 Flammability: 1 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
HMIS Hazard Classification
Health: 2 Flammability: 1 Reactivity: 0 Protection: X - See PPE section.
Hazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of chemical hazards in the workplace. These
ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency
situations. HMIS(r) ratings are to be used with a fully implemented HMIS(r) program. HMIS(r) is a registered mark of the National Paint and
Coatings Association (NPCA).
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
Page 5 of 6
3M MATERIAL SAFETY DATA SHEET COMPUBLEND(tm) II NEUTRAL CLEANER CONCENTRATE 1:63 10/23/2002
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
3M MSDSs are available at www.3M.com
Page 6 of 6
|