MATERIAL SAFETY DATA SHEET (MSDS)
1. SUBSTANCE AND COMPANY IDENTIFICATION
1.1 Identification of the product : KADPOL 980 / 940
Head Office: O.No.103, 1st Floor, SUYOG-I,
1.2 COMPANY ADDRESS :
Nr. Vejalpur Bus Stop,
Vejalpur,
Ahmedabad-380051
Gujarat (INDIA)
Tel: 00-91-79-26821374
1.3 Emergency Contact : Mr. M.Kadecha:
Tel: 00-91-79-26821374
2. COMPOSITION / INFORMATION ON INGREDIENTS
2.1 Chemical Composition
Product Description: POLYACRYLIC ACID
INCI : CARBOMER
CAS No. : 9003-01-4
EINECS : N.A.
3. HAZARDS IDENTIFICATION
3.1 Acute Health Effects : Solid particles on the eye (powder/dust) may cause pain. Dust inhalation
may cause coughing, mucous production.
3.2 Hazard Symbol : NONE
3.3 Chronic Health Effects : Contact dermatitis may occur in individuals under extreme condition of
prolonged and repeated contact.
3.4 Routs Of Exposure/Entry : Eyes, Skin contact, inhalation, ingestion.
3.5 Target Organs : Respiratory System, Skin.
3.6 Medical Conditions Aggravated by Exposure : Pre-existing respiratory disease(s) & skin
problems may be aggravated by prolonged
or
repeated inhalation of airborne dust.
3.7 Further Information : Product is classified as not dangerous (Substance health hazard
Directives EC 99/45 and conn.)
www.carbomers.com
4 FIRST AID MEASURES
4.1 Skin Contact: Wash the affected area thoroughly with plenty of water and soap.
4.2 Eye Contact: Flush eyes with plenty of one percent (1%) physiological saline for five
minutes while holding eyelids open; see a physician. If no saline is an easily
available, flush eye with plenty of clean water for 15 minutes; see a physician.
4.3 Inhalation: Remove individual(s) to fresh air. Provide protection before allowing re-entry.
4.4 Ingestion: No ingestion effects known. Treat symptomatically.
5. FIRE FIGHTING MEASURES
5.1 Suitable extinguishing media
Water, dry chemical agent (ABC) type, CO2, foam. At extinction, avoid the Scattering of burning
material and avoid creating dust hazard.
5.2 Fire Fighting Instructions
Avoid those streams or any method which will creat dust clouds. Wear self-contained breathing
apparatus (SCBA) and approved protective clothing.
6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions
Do not breath dust. Avoid ignition source. Avoid contact with eyes and skin. Use dust mask, gloves
made from anti static material and protecting glasses. Wash hands at the end of working.
6.2 Environmental precautions
Using care to avoid dust generation, vacuum or sweep into a closed container for refuse or disposal.
6.3 Methods for cleaning
Contact with water creates a very slippery film. If this occurs, the film can be broken down for clean
up with detergent solution.
7. HANDLING AND STORAGE
7.1 Handling
- Dust generation should be minimised and every ignition source such as fire, static sparks, open
flame..., even in a dosed pipe line equipment should be strictly prohibited. Use proper earthing
techniques
on all equipment to avoid static loading.
- Ensure good ventilation. Do not smoke, eat or drink at the workplace.
7.2 Storage
- Store In original containers in cool, dry area and protect from light.
- Do not store near heat sources, boilers, heaters.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Technical protective measures : use proper earthing techniques on all equipment.
8.2 Exposure control limits : none.
8.3 Respiratory protection : use dust masks.
8.4 Hand protection : use gloves from anti-static material
8.5 Eye protection : wear suitable safety glasses. Do not wear contact lenses.
8.6 Skin protection : wear overalls and closed footwear.
www.carbomers.com
9. PHYSICAL AND CHEMICAL PROPERTIES
Form Powder
Appearance/Colour White
Odor Slight acetic
Solubility (In Water) Appreciable
pH Value 2.5 ?3.0 @ 1% in water
Boiling range Not Applicable
Vapor Pressure (mmHg) Not Applicable
Melting Point Not Available
Evaporation Rate Not Volatile
Solubility in water Appreciable
Vapor Density Not Volatile
Partition Coefficient Not Available
% Volatile Weight (moisture) < 2.0%
10. STABILITY AND REACTIVITY
Stability : This product is stable.
Incompatibility with other Materials : Heat may be generated if polymer comes in contact
with strong basic materials such as ammonia, sodium
hydroxide, potassium hydroxide or strongly basic
amines.
Hazardous Polymerization : Hazardous polymerization will not occur.
Hazardous decomposition products : Carbon Monoxide, Carbon Dioxide, Hydrocarbons and
Irritating vapors.
11. TOXICOLOGICAL INFORMATION
Route : Exposures and Dose
Oral : Rat LD50 > 5000. Mg/kg.
Skin : Rabbit LD50>5000. Mg/kg.
Chronic oral Toxicity : No Significant effects
12. ECOLOGICAL INFORMATION
This product is not biodegradable; do not inhibit waste treatment bacteria; and do not pass through
typical wastewater treatment to the environment.
www.carbomers.com
13. DISPOSAL CONSIDERATIONS
Dispose of this product is not known to be defined or desingated as hazardous. Land disposal must
be in closed containers.
14. TRANSPORT INFORMATION
Not a dangerous good within the meaning of transportation regulations.
15. REGULATORY INFORMATION
Requires labeling
Hazardous component(s) for labeling
Contains : Acrylic polymer
16. OTHER INFORMATION
Miscellaneous information : None
References
Relevant manuals and publications
Own examinations
Toxicological and Eco toxicological studies
A. The information set forth herein has been gathered from standard reference materials and / or
SHREE Chemicals test data.
B. The information containing herein is based on the present state of our knowledge and is intended to
describe our product from the view of safety requirements.
C. It should not therefore be construed as guaranteeing specific properties.
D. This product should be stored, handled and used in accordance with good industrial hygiene
practices and in conformity with any legal regulation.
E. Safe handling and use remain the responsibility of the customer.
www.carbomers.com
|