MATERIAL SAFETY DATA SHEET
HVAC SUPER PRO Bonding for Copper, Copper Alloy,
Aluminum, and Brass ?Tubing and Fittings
This MSDS is being provided to your company for the purpose of providing current health and safety information to your
management and for your employees who work with this product. Please read the information on these sheets and then
provide this information to those people at your company whose responsibility it is to comply with federal, state, local and
Right-To-Know regulations. Please make this information available to any employee who requests it.
IN CASE OF AN EMERGENCY CONTACT Jackson Industries, Inc. at: 479-967-5746
SECTION 1 ?PRODUCT DESCRIPTION & COMPANY IDENTIFICATION
Product Name: HVAC SUPER PRO
Product Type: Anaerobic Sealing Compound
Company Name: Jackson Industries, Inc.
Address: 400 Lake Ridge Drive, Russellville, AR 72802
Manufacturer: Jackson Industries, Inc.
Health: 2 Fire: 1 Reactivity: 1
HMIS Code:
SECTION 2 ?COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS Number Weight % ACGIH ACGIH OSHA PEL-
TWA TLV TWA
Polyglycol Dimethacrylate 25852-47-5 50 ?70 N/E N/E N/E
Polyester Resin Proprietary 10 ?20 N/E N/E N/E
Hydroxypropyl Methacrylate 27813-02-1 5 ?10 N/E N/E N/E
Acrylic Acid 79-10-7 5 ?10 2 ppm (skin) N/L N/L
Saccharin 81-07-2 1? N/E N/E N/E
Cumene Hydroperoxide 80-15-9 1? 50 ppm N/E N/E
Acetyl Phenyl Hydrazine 114-83-0 0.01 ?0.1 N/E N/E N/E
SECTION 3 ?HAZARDS IDENTIFICATION
INGESTION: Moderately toxic.
SKIN: May cause moderate skin injury (reddening, swelling) and/or sensitization which may not occur
immediately. Prolonged contact with this product may cause burns.
INHALATION: Even though product has low volatility, vapors can be irritating.
EYES: Will cause eye irritation and possible eye injury.
TARGET ORGANS: None known.
SECTION 4 ?FIRST AID MEASURES
INGESTION: Do not induce vomiting. Have victim rinse out mouth with water, then drink sips of water to remove
taste from mouth. Get medical attention. If vomiting occurs spontaneously, keep head below hips
to prevent aspiration.
Page 1 of 1
MATERIAL SAFETY DATA SHEET
HVAC SUPER PRO Bonding for Copper, Copper Alloy,
Aluminum, and Brass ?Tubing and Fittings
SKIN: Remove contaminated clothing and wash contact area with soap and water for 15 minutes. If
dermatitis occurs, seek medical attention.
INHALATION: In case of exposure to high concentration of vapors, remove person to fresh air. If respiratory
irritation persists, seek medical attention.
EYES: Immediately flush with plenty of water (under eyelids) at least 15 minutes. If redness, burning,
blurred vision or swelling persists, consult a physician immediately.
SECTION 5 ?FIREFIGHTING MEASURES
FLASHPOINT: > 180?F (Setaflash)
EXTINQUISHING MEDIA: Use water fog, foam, dry chemical or carbon dioxide to extinguish flames.
SPECIAL FIRE FIGHTING Firefighters should wear full protective clothing and self-contained
MEASURES: breathing apparatus. Thoroughly decontaminate fire fighting equipment and fire fighting apparel
after the incident
SECTION 6 ?ACCIDENTAL RELEASE MEASURES
ACCIDENTAL RELEASE In the event of a spill, immediately remove any source of ignition.
MEASURES: Using appropriate personal protective equipment and non-sparking
tools, contain spilled material. Cover the liquid with inert absorbent.
Scoop all contaminated material into containers for proper disposal.
SECTION 7 ?STORAGE AND HANDLING
HANDLING AND STORAGE: Store below 100?F for maximum stability. Do not store in direct sunlight or near high heat
sources. To prevent loss of inhibitor, do not blanket or sparge with nitrogen. Store samples in
original packaging. If product has solidified, do not attempt to use. Wash skin thoroughly with soap
and water after handling. Solvents should not be used to clean hands or skin because they
increase the penetration of the material into the skin.
SECTION 8 ?EXPOSURE CONTROL/PERSONAL PROTECTION
VENTILATION: Good air circulation and ventilation is adequate.
RESPIRATORY PROTECTION: A respirator protection program that meets OSHA 1910.134 must be followed whenever workplace
conditions warrant the use of a respirator.
SKIN PROTECTION: Butyl or nitrile gloves should be used along with appropriate clothing.
EYE PROTECTION: Chemical splash safety eyewear is always recommended.
SECTION 9 ?PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: Purple, viscous liquid
ODOR: Slight vinegar
SPECIFIC GRAVITY: 1.05
SOLUBILITY IN WATER: Partial
Page 2 of 2
MATERIAL SAFETY DATA SHEET
HVAC SUPER PRO Bonding for Copper, Copper Alloy,
Aluminum, and Brass ?Tubing and Fittings
VAPOR PRESSURE: N/A
VOLATILE ORGANIC CONTENT: < 100 grams/liter
SECTION 10 ?STABILITY AND REACTIVITY
STABILITY: This product is stable under normal conditions.
HAZARDOUS Hazardous polymerization may occur. Uncontrolled polymerization may
POLYMERIZATION: cause rapid evolution of heat and increase in pressure that could result in violent rupture of sealed
containers.
HAZARDOUS Hazardous decomposition products may include oxides of carbon and
DECOMPOSITION nitrogen, hydrocarbon fragments and organic decomposition fragments.
PRODUCTS:
REACTIVITY: This product will not polymerize unless exposed to a free radical initiator; such as copper, copper
alloys, brass, and aluminum.
CONDITIONS TO AVOID: Storage above 100?F, exposure to direct sunlight or other UV sources, loss of dissolved air or
polymerization inhibitor, contamination with incompatible materials.
SECTION 11 ?TOXICOLOGY INFORMATION
Chemical Name CAS # Oral LD (50) Dermal LD (50)
Polyglycol Dimethacrylate 25852-47-5 No Data No Data
Polyester Resin Proprietary No Data No Data
Hydroxypropyl Methacrylate 27813-02-1 11,600 mg/kg rat No Data
Acrylic Acid 79-10-7 1,500 mg/kg rat 640 mg/kg rat
Saccharin 81-07-2 17,000 mg/kg mouse No Data
Cumene Hydroperoxide 80-15-9 2,000 mg/kg rat 1,500 mg/kg rat
Acetyl Phenyl Hydrazine 114-83-0 No Data No Data
SECTION 12 ?ECOLOGICAL INFORMATION
Data on components of this product are summarized below.
Hydroxypropyl Methacrylate (27813-02-1): Limited studies have indicated that this component to have a low toxicity to fish and other
aquatic life. Environmental Fate: This product is biodegradable.
Acrylic Acid (79-10-7): Readily biodegradable in accordance with OECD 301A (old version, aerobic). Acute and prolonged toxicity to
rainbow trout/LC50 (96h) = 27 mg/l. Acute toxicity to aquatic invertebrates Daphnia magna/EC50 (72h) = 47 mg/l. Toxicity to
microorganisms ?activated sludge, domestic/EC10 (0.5h) = 900 mg/l.
Cumene Hydroperoxide (80-15-9): Moderately toxic to golden orfe (LC50 = 8 mg/l) and algae (72-hr EC50 = 1.6 mg/l; biomass 3.1
mg/l). Slightly toxic to Daphnia magna (48-hr EC50 = 18 mg/l).
SECTION 13 ?DISPOSAL CONSIDERATIONS
Dispose in accordance with federal, state, and local regulations. Do not allow product to enter waterways.
SECTION 14 ?TRANSPORTATION INFORMATION
UN OR ID NUMBER: Not Listed.
PROPER SHIPPING NAME: Not Regulated.
Page 3 of 3
MATERIAL SAFETY DATA SHEET
HVAC SUPER PRO Bonding for Copper, Copper Alloy,
Aluminum, and Brass ?Tubing and Fittings
ITA: Not Regulated.
HAZARD CLASS/DIVISION: Not Regulated.
GROUND TRANSPORTATION: Not Regulated.
DOT: 49 CFR Part 172
SECTION 15 ?REGULATORY INFORMATION
SARA Section 302 EHS (40 CFR 355)
Component CAS# % By Weight
1,4-Benzenediol 123-31-9 < 0.001
Propylene Oxide 75-56-9 < 0.001
SARA Section 304 CERCLA Hazardous Substances (40 CFR 302)
Component CAS# % By Weight
Cyclohexane 110-82-7 < 0.15
1,4-Benzenediol 123-31-9 < 0.001
Propylene Oxide 75-56-9 < 0.001
SARA Section 313 Toxic Chemical List
Component CAS# % By Weight
Acrylic Acid 79-10-7 5 ?10
Cumene Hydroperoxide 80-15-9 1?
SARA Section 311/312 Hazard Communication Standard
Reactivity, Acute, Chronic, Fire
TSCA Section 12(b) Export Notification
Component CAS# % By Weight
4-Methoxyphenol 150-76-5 < 0.025
Heptane 142-82-5 < 0.001
California Proposition 65
Component CAS# % By Weight
Saccharin 81-07-2 1?
Propylene Oxide 75-56-9 < 0.001
State Regulations (Right-To-Know / Hazardous Substance List)
Component CAS# State
Saccharin 81-07-2 MA, NJ, PA
Cumene Hydroperoxide 80-15-9 MA, NJ, PA
Page 4 of 4
MATERIAL SAFETY DATA SHEET
HVAC SUPER PRO Bonding for Copper, Copper Alloy,
Aluminum, and Brass ?Tubing and Fittings
Acrylic Acid 79-10-7 MA, NJ, PA
4-Methoxyphenol 150-76-5 MA, NJ, PA
SECTION 16 ?OTHER INFORMATION
Date: April 8, 2009
Revised: October 29, 2009
Contact Information: Miles Jackson, Phone (479) 967-5746
Jackson Industries, Inc. provides the information contained herein in good faith but makes no representation as to its
comprehensiveness or accuracy. Individuals receiving this information must exercise their independent judgment in
determining its appropriateness for a particular purpose. Jackson Industries, Inc. makes no representations or
warranties, either expressed or implied, of merchantability, fitness for a particular purpose with respect to the information
set forth herein or to the product to which the information refers. Accordingly, Jackson Industries, Inc. will not be
responsible for damages resulting from use of or reliance upon this information.
Page 5 of 5
|