FUCHS LUBRICANTS CANADA LTD.
CENTURY OIL DIVISION
Material Safety Data Sheet WHMIS D-2B
NFPA and HMIS H-1, F-1, R-0, PPE-X
SECTION 1 - PRODUCT IDENTIFICATION AND USE
Product Identifier Product Identification
RENOKOOL 1515 (formerly Ecocool 1515) Number (PIN): N.Ap.
Product Use Soluble Oil Machining Fluid
Manufacturer's Name: Supplier's Name:
Fuchs Lubricants Fuchs Lubricants
Canada Ltd. Canada Ltd.
Street Address: Street Address:
405 Dobbie Drive 19829 - 99A Avenue
City: Province: ON City: Province:
Cambridge Langley BC
Postal Code: Emergency Telephone Postal Code Emergency Telephone
Number: Number:
N1R 5X9 (519) 622-2040 V1M 3G4 (800) 661-6457
SECTION 2 - HAZARDOUS INGREDIENTS
Hazardous Ingredients % (wt/wt) CAS Number LD50 of Ingredient LC50 of Ingredient
(specify species & route) (specify species & route)
Polyoxyethylene (5) castor oil 10 - 30 61791-12-6 N.E. N.E.
Amine Borate mixture - DEA free 5 - 10 mixture N.E. N.E.
1-5 4719-04-4 N.E. 535 mg/kg oral rat
1,3,5-triazine-1,3,5(2H, 4H, 6H) triethanol
Fatty alcohol - ethoxylated 1-5 9004-98-2 10-100mg/L fish >2000 mg/kg oral rat
Dinonylphenol mixture 1-5 mixture N.E. 10000 mg/kg oral rat
SECTION 3 - PHYSICAL DATA
Physical State Odour & Appearance Odour Threshold (ppm)
Liquid Hazy blue liquid with mild amine odour N.Av.
Vapour Pressure Vapour Density Evaporation Rate Boiling Point (掳C) Freezing Point (掳C)
N.Av. N.Av. N.Av. N.Av. N.Av.
(mmHg): (air=1):
pH Specific Gravity Coeff. Water/Oil Dist.:
8.9 @ 5% 0.98 @ 15.6掳C >1
SECTION 4 - FIRE & EXPLOSION DATA
Flammability: No If yes, under which conditions?
Means of extinction: In accordance with NFPA guidance, dry chemical, foam, or CO2 fire extinguishers
are all acceptable. Note that while water fog extinguishers are also acceptable, do NOT apply a direct stream
of water onto burning product because it may cause spreading and increase fire intensity.
Flashpoint (掳F) and Method: Hazardous Combustion Products: Oxides of carbon and incomple-
179 (Cleveland Open Cup) tely burned hydrocarbons in the form of fumes and smoke.
Autoignition Temperature (掳C): Upper Flammable Limit Lower Flammable Limit
(% by volume): (% by volume):
N.Av. N.Av. N.Av.
Explosion Data Sensitivity to impact: Sensitivity to Static Discharge:
None known None known
SECTION 5 - REACTIVITY DATA
Chemical Stability: If no, under which conditions?
Yes
Incompatibility with other substances: If so, which ones?
Yes Strong oxidizing and
reducing agents. Do not add nitrites
Reactivity, & under what conditions? Do not add nitrites to this product. These may combine with
amines to produce nitrosamines which are known carcinogens in animals.
Hazardous Decomposition Products? Thermal decomposition may produce: oxides of carbon, and
incompletely burned hydrocarbons in the form of fumes and smoke. This product is not expected to
decompose.
N. Av. = Not Available N. Ap. = Not Applicable N.E. = Not established
Product Identifier RENOKOOL 1515
SECTION 6 - TOXICOLOGICAL PROPERTIES
Route of entry:
Skin contact (X) Skin Absorption ( ) Eye contact (X) Inhalation ( ) Ingestion (X)
Effects of Acute Exposure to Product: May cause skin irritation. Inhalation of mist may cause chest
discomfort and coughing. Ingestion may cause gastro-intestinal irritation, nausea, vomiting, and diarrhea.
Effects of Chronic Exposure to Product: Prolonged skin contact may cause mild skin irritation.
Prolonged/repeated skin contact may aggravate an existing dermatitis condition.
Exposure Limits: Irritancy of Product: Sensitization to Product: Carcinogenicity:
TLV for metalworking oil May cause skin irritation None known None known
mists 1mg/m3 (TWA)
Teratogenicity: Reproductive Toxicity: Mutagenicity: Synergistic
Products:
None known None known None known
None known
SECTION 7 - PREVENTIVE MEASURES
Personal Protective Equipment:
Gloves (specify): Respirator (specify): Eye (specify):
PVC or Use Chemical safety glasses
synthetic rubber if needed respirator if TLV is exceeded glasses. Wear face shield if splashing.
Footwear (specify): Normal Clothing (specify): Other (specify): Follow standard
non-slip, industrial footwear Coveralls are normally sufficient industrial hygiene practices.
Engineering Controls (specify, eg. ventilation, enclosed process): Provide adequate
ventilation (such as mechanical or local) to assure TLV is not exceeded.
Leak and Spill Procedure: For small spills: soak up spill with absorbent material. For large spills:
Dike spill and pump into drums for proper disposal. Prevent from entering water systems.
Waste Disposal: Send to a licensed reclaimer/waste disposal facility, incinerate or landfill in
accordance with local, provincial, state and federal regulations.
Handling Procedures and Equipment: Handle product in a manner that minimizes exposure to
practical levels. Open containers slowly to relieve any pressure. Follow standard industrial hygiene practices.
Storage Requirements: Protect product quality by storing indoors and away from extreme temperatures.
Close all containers when not in use.
Special Shipping Requirements:
TDG: Not regulated.
SECTION 8 - FIRST AID MEASURES
Specific measures:
EYES: Flush with clean water for 15 minutes. Consult a physician if irritation persists.
SKIN: Wash with soap and water. Remove contaminated clothing and launder before
re-use. If symptoms of exposure persist, contact a physician.
INGESTION: DO NOT induce vomiting. Dilute by giving at least 2 glasses of milk or water
to a conscious person. Contact a physician if symptoms of ingestion persist.
INHALATION: Move person to fresh air. If breathing is difficult, administer oxygen.
If breathing has stopped, give artificial respiration and contact physician.
SECTION 9 - PREPARATION DATE OF MSDS
Prepared by (Group Department, etc.): Phone Number: Date:
CHEMICAL SERVICES DEPT. (604) 888-1552 June 3, 2002
|