For Chemical Emergency Call: (603) 424-9000
Date Prepared: January 1995
Revised: July 8, 2003
Material Safety Data Sheet
CHEMFAB庐 Composite Materials
GENERAL DESCRIPTION: Fluoropolymer breathing apparatus approved by U.S. 6. First Aid:
coated woven fiberglass fabric, various Bureau of Mines if there is a danger of
EMERGENCY FIRST AID TREATMENT:
colors and thicknesses. inhaling smoke from a fire involving
Remove patient to fresh air; call
any fluorocarbon.
physician.
1. Hazardous Ingredients:
UNUSUAL FIRE AND EXPLOSION HAZARDS:
The above product(s) are considered 7. Precautions for Safe Handling and Use:
Product is difficult to ignite and will
鈥渁rticles鈥? according to OSHA Hazard ordinarily not burn once the source of STEPS TO BE TAKEN IN CASE MATERIAL IS
Communication Standard ignition is removed. In an extreme fire RELEASED OR SPILLED: N/A
29 CFR 1910.1200 and, as such, are exempt situation, protection from hydrogen
WASTE DISPOSAL: Landfill is preferred;
from the material safety data sheet fluoride should be employed.
burning not recommended. With
provisions of 29 CFR 1910.1200 (G) (6). As
incineration, gaseous products should
a courtesy to the customer, Saint-Gobain 4. Reactivity Data:
be removed by alkaline scrubbing.
PPL has prepared this material safety
STABILITY: Stable
data sheet to provide appropriate safety PRECAUTIONS TO BE TAKEN IN HANDLING
HAZARDOUS DECOMPOSITION OR BY-
and handling information. These AND STORING: Provide proper local and
PRODUCTS: Toxic gaseous material
products are considered nonhazardous general ventilation if product is heated
(HF and fluorocarbon olefins) may be
when used according to accepted above 275掳C. Avoid contamination of
evolved above 380掳C.
practices for the intended use. smoking materials; do not smoke
while cutting, heat sealing, or
5. Health Hazard Data:
2. Physical/Chemical Data:
fabricating material.
ROUTES OF ENTRY: N/A
APPEARANCE AND ODOR: Flexible, odorless
sheet, various shades of white, off-white, HEALTH HAZARDS (ACUTE AND CHRONIC):
brown, tan, black or other colors Exposure to fumes generated if the
product is heated above 275掳C may
SOLUBILITY IN WATER: Insoluable
result in 鈥淧olymer Fume Fever.鈥?
3. Fire and Explosion Hazard Data:
SIGNS AND SYMPTOMS OF EXPOSURE:
FLASH POINT: N/A 鈥淧olymer Fume Fever鈥濃?? flu-like
symptoms (chills, fever, tightness in the
EXTINGUISHING MEDIA: Foam, carbon
chest), appearing two or more hours
dioxide, dry chemical.
after exposure and subsiding within 36
SPECIAL FIRE FIGHTING PROCEDURES: to 48 hours, even in the absence of
Wear face mask and self-contained treatment.
Limited Warranty: For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Saint-Gobain Performance
Corporation warrants this product(s) to be free from defects in manufacturing. Our only obligation will be to Plastics Corporation
provide replacement product for any portion proving defective, or at our option, to refund the purchase price 701 Daniel Webster Highway
thereof. User assumes all other risks, if any, including the risk of injury, loss or damage, whether direct or P.O. Box 1137
consequential, arising out of the use, misuse, or inability to use this product(s). SAINT-GOBAIN PERFORMANCE Merrimack, NH 03054
PLASTICS DISCLAIMS ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
www.fff.saint-gobain.com
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
NOTE: Saint-Gobain Performance Plastics Corporation does not assume any responsibility or liability for any
advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final
CHEMFAB is a registered trademark of Saint-Gobain
product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user Performance Plastics Corporation.
should perform its own tests to determine the suitability and fitness of the product(s) for the particular purpose 漏2004 Saint-Gobain Performance Plastics Corporation
desired in any given situation. AFF-1244-PDF-0104-SGCS
|