MATERIAL SAFETY DATA SHEET
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION
043P
Fine UV Silver Paste
North America: Europe: Asia:
NOR-COTE INTERNATIONAL, INC. NOR-COTE INTERNATIONAL LTD. NOR-COTE INTERNATIONAL PTE. LTD.
506 Lafayette Avenue Unit 8 Warrior Park Blk 4012 Ang Mo Kio Ave 10
Crawfordsville, Indiana 47933 Eagle Close #05-08 Techplace 1,
United States Chandlers Ford Industrial Estate Singapore 569628
Phone: 765-362-9180 (day phone) Eastleigh, Hampshire Tel: +65 6291-0898 (day phone)
MSDS Issuer: EHS Department SO53 4NF
Emergency Phone: England
CHEMTREC (United States) Tel: +44 (0) 23 80270542 (day phone)
800-424-9300 Emergency Phone:
CHEMTREC (Outside U.S.)
703-527-3887
SECTION 2 INGREDIENTS
CHEMICAL NAME PERCENT BY WEIGHT CAS# EXPOSURE LIMITS EC#
10 mg/m3 (ACGIH TLV)
Aluminum 45-50% 7429-90-5 231-072-3
15 mg/m3 (OSHA PEL)
Proprietary Photoinitiator Mixture 45-50% Proprietary Not established Proprietary
Stearic Acid <1.5% 57-11-4 Not established 200-313-4
SECTION 3 HAZARDS IDENTIFICATION
ROUTES OF ENTRY: Dermal, Inhalation, Ingestion
GENERAL HEALTH EFFECTS: Irritant to skin, eyes and respiratory tract. Effects may be delayed for several hours.
ACUTE:
Skin Contact: Potential irritant and can cause allergic skin reaction. Repeated or prolonged contact may cause sensitization.
?br>
Eye Contact: Liquid, vapors, or mists may cause eye irritation. Protect eyes from repeated or prolonged contact.
?br>
Inhalation: May cause irritation to upper respiratory tract upon prolonged or repeated inhalation.
?br>
Ingestion: May be harmful if swallowed. Gastrointestinal tract irritation may result.
?br>
CHRONIC: No data available
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: No data available. Repeated and prolonged overexposure may increase
the potential for adverse health effects.
SECTION 4 FIRST AID MEASURES
SKIN CONTACT: Flush skin with running lukewarm water. Wash affected areas using mild soap. Contact a physician if irritation or
redness persists.
EYE CONTACT: Flush the eye and under lids with warm water for minimum of 15 minutes. Remove any contact lenses during the
flushing. Get immediate medical attention if irritation persists.
INHALATION: Move subject to fresh air and keep warm. If subject is not breathing, administer artificial respiration and get
immediate medical attention.
INGESTION: Medical attention is not anticipated, but if appreciable quantities are swallowed, get medical attention.
SECTION 5 FIRE FIGHTING MEASURES
Evacuate area of all non-emergency personnel. Fire fighters must wear full emergency equipment with self-contained breathing
apparatus. At elevated temperatures hazardous polymerization may occur causing container rupture and in extreme cases,
explosion. Fight fires from upwind and cool intact containers with water spray or stream at maximum range.
FLASHPOINT: Not established
FLAMMABLE/EXPLOSIVE LIMITS (Volume % in air): Not established
AUTO-IGNITION TEMPERATURE: Not established
EXTINGUISHING METHOD: Water fog, carbon dioxide (CO2) or dry chemical
043P Fine UV Silver Paste Page 1 of 3 Revision Date: November-3-2008
MATERIAL SAFETY DATA SHEET
SECTION 6 ACCIDENTAL RELEASE MEASURES
Cover and soak up spills with absorbent, non-combustible material such as sand, sweeping compound or diatomaceous earth.
Collect material and place it in labeled, closed containers for disposal as solid in accordance with Section 13. Wear recommended
personal protective equipment from Section 8. For large spills, dike the area to prevent runoff from contacting public drains, sewers,
or streams.
SECTION 7 HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Protect containers from physical damage. Storage of containers
should conform to flammable and combustible liquid regulations.
OTHER PRECAUTIONS: Store away from heat and sunlight below 120?F (49?C).
SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION
HAND PROTECTION: Use solvent resistant gloves to minimize contact. Wash all affected areas prior to eating and at completion of
handling. Replace immediately if punctured or torn or when a change of appearance (color, elasticity, shape) occurs.
EYE PROTECTION: Use safety glasses or chemical splash goggles that are ANSI approved to prevent eye contact. Eyewash
availability is also recommended.
SKIN PROTECTION: Protective or disposable outer clothing is recommended.
RESPIRATORY PROTECTION: Use proper general or local exhaust ventilation to maintain concentrations below exposure limits in
Section 1. If adequate ventilation is not available, use of a NIOSH approved respirator for environments containing solvents is
recommended where exposure limits are exceeded.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE AND ODOR: Metallic silver paste with mild acrylic odor
BOILING POINT: Not established FREEZING POINT: Not established
SPECIFIC GRAVITY: Not established VISCOSITY (at 25?: Not established
VAPOR DENSITY: Not established VOC: Not established
SOLUBILITY IN WATER: Not established pH: Not established
EVAPORATION RATE: Not established DENSITY: Not established
SECTION 10 REACTIVITY / STABILITY HAZARD DATA
STABILITY: This material is stable when used under normal conditions.
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS: Combustion may produce carbon monoxide and /or carbon dioxide and aluminum
oxide. Aluminum reacts with water, oxidizing agents, acids, and alkalis to produce hydrogen gas.
CONDITIONS TO AVOID: Avoid contact with heat and sunlight.
INCOMPATIBILITY (MATERIALS TO AVOID): Aluminum is incompatible with water, acids, caustics, halogenated hydrocarbons
(including halogenated extinguishing agents) and oxidizers.
SECTION 11 TOXICOLOGICAL INFORMATION
TOXICOLOGICAL DATA: No data available
LD50 ?Not determined LC50 ?Not determined
REPRODUCTIVE TOXICITY: Not determined TERATOGENICITY: Not determined MUTAGENICITY: Not determined
CARCINOGENICITY: IARC? No NTP? No OSHA? No
SECTION 12 ECOLOGICAL INFORMATION
No data available. No determination has been made on ecological impact. However, it is highly recommended to prevent
contamination of the environment with this product, i.e. soil, landfills, drains, sewers, surface waters, etc.
SECTION 13 DISPOSAL CONSIDERATIONS
Dispose of this material in accordance with all applicable federal, state, provincial, and local laws and regulations.
043P Fine UV Silver Paste Page 2 of 3 Revision Date: November-3-2008
MATERIAL SAFETY DATA SHEET
SECTION 14 TRANSPORTATION INFORMATION
Transport this product in accordance with all applicable laws and regulations.
SECTION 15 REGULATORY INFORMATION
This Material Safety Data Sheet has been formatted to the best of our ability in accordance with American National Standards
Institute (ANSI), European Communities (EC), and contains hazard criteria and all information required by the Canadian Controlled
Products Regulation (CPR) in regard to this product.
International Inventory Status: Status on International Inventory lists such as the Canadian Domestic Substances List, European
Inventory of Existing Chemical Substances (EINECS), and Japan Existing and New Chemical Substances (ENCS) inventories is
currently being confirmed.
Canadian Workplace Hazardous Material Information System (WHMIS): The following chemicals are on the ingredient
disclosure list: Aluminum
Stearic Acid
U.S. FEDERAL REGULATIONS
Coalition of Northeastern Governors (CONEG): This product meets the requirements of CONEG pertaining to heavy metals total
content of no more than 100 PPM. No heavy metals are added as a part of the formulation, but raw materials may contain residual
parts per million as naturally occurring elements.
Food and Drug Administration (FDA) Food Packaging Status: This product has not been cleared by the FDA for use in food
packaging and/or other applications as an indirect food additive.
Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III:
Section 302 ?Extremely Hazardous Substances (EHS): This product is not regulated as an EHS.
Section 304 - CERCLA: This product is not regulated for emergency release notification.
Section 311/312 ?Hazard Communication Standard (HCS): This product is classified as an acute hazard.
Section 313 ?Toxic Chemical List (TCL): This product contains the following chemicals regulated under the Toxic Chemical
Release Reporting requirements under 40 CFR 372: Aluminum
Toxic Substances Control Act (TSCA)
Section 5(e): This product is not regulated under the Consent Order/Significant New Use Rule.
Section 8(b) ?Inventory Status: All chemicals in this product are TSCA listed.
SECTION 16 OTHER INFORMATION
Definitions
TWA ?Time Weighted Average
TLV ?Threshold Limit Value
STEL ?Short Term Exposure Limit
CAS# - Chemical Abstract Service Number
NTP ?National Toxicology Program
PEL ?Permissible Exposure Limit
IARC - International Agency for Research on Cancer
ANSI ?American National Standards Institute
Supersedes:
December-1-2004
Disclaimer: To the best of our knowledge, the product information contained herein is based upon data believed to be reliable,
however Nor-Cote makes no warranty and disclaims any liability whatsoever for its accuracy or completeness. Since the actual use
of the product is beyond our control, no guarantee expressed or implied, is made by Nor-Cote as to the effects of such uses nor does
Nor-Cote assume liability arising out of the use of this product by others. It remains the responsibility of the user to ensure that the
use of the product herein is in accordance with all applicable laws and regulations.
043P Fine UV Silver Paste Page 3 of 3 Revision Date: November-3-2008
|