Version: 3.0 Page: 1 of 4
Revised: 21 March 2010 MSDS No: 279
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO NOHSC CRITERIA
1. Identification of the substance/preparation and company
Product:
Sika Acrylic
Recommended use:
Water based acrylic sealant.
Manufacturer/supplier information:
Manufacturer/supplier: Sika Australia Pty Ltd
Street/postbox: 55 Elizabeth Street
Town/city and Post Code: WETHERILL PARK NSW 2164
Country: AUSTRALIA
Phone: (02) 9725 1145
Fax: (02) 9725 3330
General information Operations Manager
Emergency information phone: 1800 033 111
2. Hazard identification
Hazard Category:
Risk Phrase(s): Not allocated
Safety Phrase(s): Not allocated
3. Composition/information on ingredients
Chemical characterization:
Aqueous acrylic sealant
Hazardous ingredients:
Ingredient CAS No Concentration
White spirits 8052-41-3 1 - 10%
Styrene acrylic latex 10-30%
4. First-aid measures
Inhalation:
Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen
remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest
until fully recovered. Seek medical advice if effects persist.
Skin contact:
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.
If swelling, redness, blistering or irritation occurs seek medical assistance.
Eye contact:
If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible precaution
to seek medical advice.
Ingestion:
If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New
Zealand 0800 764 766). Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass
of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting occurs give
further water. Seek medical advice.
Safety Data Sheet
According to NOHSC:2011(2003)
Version: 3.0 Page: 2 of 4
Revised: 21 March 2010 MSDS No: 279
Notes to physician:
Treat symptomatically.
5. Fire-fighting measures
Specific hazards:
In the event of fire carbon monoxide and carbon dioxide can be released.
Special protective precautions and equipment:
Fire fighters to wear self-contained breathing apparatus and suitable protective clothing if risk of
exposure to vapour or products of combustion.
Suitable extinguishing media:
If material is involved in a fire use water fog (or if unavailable fine water spray), foam, dry agent
(carbon dioxide, dry chemical powder).
6. Accidental release measures
Spills:
Wear protective equipment to prevent skin and eye contamination. Wipe up with absorbent (clean rag
or paper towels). Collect and seal in properly labelled containers or drums for disposal. Prevent
contamination of drains and waterways.
7. Handling and storage
Handling:
Avoid eye contact and repeated or prolonged skin contact. Use recommended personnel protective
equipment. .Do not smoke in work area. Work in well ventilated areas.
Storage:
Store in a cool ( <300C) dry place away from heat sources and out of direct sunlight.
8. Exposure controls/personal protection
National occupational exposure limits:
No value assigned for this specific material by the NOHSC Australia. However the Australian exposure
Standard for the acylic component are the following
Biological Limit Values:
As per the "National Model Regulations for the Control of Workplace Hazardous Substances [NOHSC:
1005 (1994)]" the ingredients in this material do not have a Biological Limit Allocated.
Engineering measures:
Natural ventilation should be adequate under normal use conditions.
Personal protection equipment:
OVERALLS, SAFETY SHOES, SAFETY GLASSES, GLOVES.
Wear overalls, safety glasses and impervious gloves. Due to variations in glove construction and local
conditions, the user should make an assessment of the appropriate gloves to use. Wash hands before
Safety Data Sheet
According to NOHSC:2011(2003)
Version: 3.0 Page: 3 of 4
Revised: 21 March 2010 MSDS No: 279
smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective
equipment before storing or re-using.
9. Physical and chemical properties
Appearance:
Physical state: Thixotropic paste
Colour: White
Odour: Characteristic
Data relevant to safety:
Solubility: Soluble in water.
Specific gravity 1.60
PH 7-9
VOC 22g/litre ( Californian South coast air quality management rule 1168)
10. Stability and reactivity
Chemical stability:
This material is thermally stable when stored and used as directed.
Conditions to avoid:
No specific conditions to avoid.
Incompatible Materials:
None established.
Hazardous decomposition products:
Oxides of carbon, smoke and other toxic fumes.
Hazardous reactions:
No information available.
11. Toxicological information
No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and
the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs
are:
Acute Effects:
Inhalation: Does not present any problems under normal conditions due to very low vapour pressure.
Skin contact: Mild irritant.
Eye contact: May cause irritation.
Ingestion: may cause abdominal discomfort if swallowed in large quantities.
Long Term Effects:
No information available for product.
Acute toxicity / Chronic toxicity:
No LD50 data available for the product.
12. Ecological information
Avoid contaminating waterways.
Ecotoxicity:
No information available.
Safety Data Sheet
According to NOHSC:2011(2003)
Version: 3.0 Page: 4 of 4
Revised: 21 March 2010 MSDS No: 279
Persistence and degradability:
No information available.
Mobility:
No information available.
13. Disposal considerations
Refer to State/Territory Land Waste Management Authority.
14. Transport information
ADG/ADR/RID
Not classified as Dangerous Goods by the criteria of the ADG Code.
IMDG
Not classified as Dangerous Goods by the criteria of the IMDG Code for transport by sea.
IATA
Not classified as Dangerous Goods by the criteria of the IATA Dangerous Goods Regulations for
transport by air.
15. Regulatory information
Poisons Schedule (Aust):
Not scheduled.
All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS).
16. Other information
Reason(s) For Issue: Revised
Material Safety Data Sheets are updated frequently. Please ensure that you have a current copy. MSDS
may be obtained from the following website: www.sika.com.au
The information contained in this Safety Date Sheet corresponds to our level of knowledge at the time of
publication. All warranties are excluded. Our most current General Sales Conditions shall apply. Please
consult the Technical Data Sheet prior to any use and processing.