Page 1/7
MATERIAL SAFETY DATA SHEET
FOR INDUSTRIAL USE ONLY
DESCRIPTION: Cascoset FM-7400
1. Chemical Product and Company Identification
Cascoset FM-7400
DESCRIPTION:
PRODUCT CODE: 334556
PRODUCT TYPE: Slurry
APPLICATION: PRF FM-Free Slurry Hardener
Part of the CASCO?Brand of Adhesives and Resins from Hexion
Manufacturer/Supplier Information
MSDS prepared by:
For Emergency Medical Assistance
Hexion Specialty Chemicals, Inc.
610 South Second St Call Health & Safety Information Services
Springfield, OR 1-866-303-6949
97477
For additional health and safety or regulatory information, call (614)225-4778.
2. Hazards Identification
2.1 Emergency Overview
Appearance Light brown liquid
Odor Characteristic
CAUTION!
Will burn.
May cause eye irritation.
HMIS Rating
HEALTH = 1 (slight)
FLAMMABILITY = 1 (slight)
REACTIVITY = 0 (minimal)
CHRONIC = *
HMIS?ratings involve data interpretations that may vary from company to company. They are intended only for the
rapid, general identification of the magnitude of the specific hazard. To deal adequately with the safe handling of this
material, all the information contained in this MSDS must be considered.
2.2 Potential Health Effects
Immediate Hazards
Cascoset FM-7400 Version: 7 Current Issue: 14-JUN-2007 Printed: 19-JUN-2009
Page 2/7
INGESTION: Not expected to be harmful under normal conditions of use.
If accidentally swallowed, burns or irritation to mucous membranes,
esophagus or GI tract can result.
INHALATION: Not expected to be harmful under normal conditions of use. However, if
allowed to become airborne, may cause irritation of nose, throat and
lungs.
SKIN: May cause irritation on prolonged or repeated contact.
EYES: May cause irritation on prolonged or repeated contact.
Delayed Hazards
7747-35-5 7a-Ethyldihydro-1H,3H,5H-oxazolo[3,4-c]oxazole
May cause allergic skin reaction.
-- See Footnote at end of section
Footnote: As of the date of issuance of this document, this material has not been listed by NTP, classified by IARC nor
regulated by OSHA as a carcinogen.
3. Composition, Information on Ingredients
The ingredients listed below have been associated with one or more immediate and/or
delayed(*) health hazards. Risk of damage and effects depends upon duration and level of
exposure. BEFORE USING, HANDLING, OR EXPOSURE TO THESE INGREDIENTS, READ
AND UNDERSTAND THE MSDS.
% by weight
7747-35-5 *7a-Ethyldihydro-1H,3H,5H-oxazolo[3,4-c]oxazole 10.0 - 30.0
34375-28-5 2-(hydroxymethylamino)ethanol 1.0 - 5.0
140-95-4 *Dimethylolurea 5.0 - 10.0
Any applicable Canadian trade secret numbers will be listed in Section 15.2.
4. First Aid Measures
INGESTION: If accidentally swallowed, dilute by drinking large quantities of water. If
the individual is drowsy or unconscious, do not give anything by mouth.
Immediately contact poison control center or hospital emergency room
for advice on whether to induce vomiting or for any other additional
treatment directions.
INHALATION: Remove to fresh air.
SKIN: Immediately flush with plenty of water for at least 15 minutes.
EYES: Immediately flush eyes with plenty of water. Call a physician if irritation
persists.
5. Fire Fighting Measures
Suitable Extinguishing Media: In case of fire, use water spray, dry chemical, foam or CO2.
Use water to keep fire-exposed containers cool.
Will burn.
6. Accidental Release Measures
Cascoset FM-7400 Version: 7 Current Issue: 14-JUN-2007 Printed: 19-JUN-2009
Page 3/7
Contain and/or absorb spill with inert material (e.g. sand, vermiculite), then place in a suitable
container. For large spills, use water spray to disperse vapors and flush spill area. Prevent
runoff from entering waterways or sewers. Use appropriate Personal Protective Equipment
(PPE).
7. Handling and Storage
7.1 Handling
Handle in accordance with good industrial hygiene and safety practices. These practices
include avoiding unnecessary exposure and removal of the material from eyes, skin and
clothing. Wash thoroughly after handling. Always use appropriate Personal Protective
Equipment (PPE).
INHALATION: Avoid prolonged or repeated breathing of vapor.
SKIN: Avoid prolonged or repeated contact with skin and clothing.
EYES: Avoid prolonged or repeated contact with eyes.
7.2 Storage
Keep container closed.
Store in a cool, dry place.
Limited storage life - Refer to product specifications.
8. Exposure Controls/Personal Protection
8.1 Exposure Guidelines
7747-35-5 7a-Ethyldihydro-1H,3H,5H-oxazolo[3,4-c]oxazole
ACGIH TLV None established
OSHA PEL None established
34375-28-5 2-(hydroxymethylamino)ethanol
ACGIH TLV None established
OSHA PEL None established
140-95-4 Dimethylolurea
ACGIH TLV None established
OSHA PEL None established
8.2 Exposure Controls
If airborne contaminants are generated when the material is heated or handled, sufficient
ventilation in volume and air flow patterns should be provided to keep air contaminant
concentration levels below acceptable criteria.
8.3 Personal Protection
Use goggles if contact is likely. Wear impervious gloves as required to prevent skin contact.
Cascoset FM-7400 Version: 7 Current Issue: 14-JUN-2007 Printed: 19-JUN-2009
Page 4/7
9. Physical and Chemical Properties
Appearance Light brown liquid
Odor Characteristic
Odor threshold Not available
pH 8.2 - 9.6
Freezing point Not available
Boiling point, 760 mm Hg Not available
Flash point Greater than 93.4 癈 (200.1 癋)
Evaporation rate Not available
Lower explosion limit Not available
Upper explosion limit Not available
Vapor pressure Not available
Vapor density Not available
Specific gravity 1.177 - 1.225
Solubility in water Not available
Octanol/water partition coefficient Not available
Autoignition temperature Not available
Viscosity 600 - 2,100 cPs Brookfield
10. Stability and Reactivity
Chemical Stability
Normally stable as defined in NFPA 704-12(4-3.1).Normally stable as defined in NFPA 704-
12(4-3.1).
Hazardous Decomposition Products
CO, CO2, aldehydes (including formaldehyde), particulate matter and other organic
compounds.
Possibility of Hazardous Reactions
Hazardous polymerization is not expected to occur .
11. Toxicological Information
SKIN: This product was not an irritant when tested using an "in vitro" test
method.
EYES: This product was a minimal to mild irriitant when tested using an "in
vitro" test method.
7747-35-5 7a-Ethyldihydro-1H,3H,5H-oxazolo[3,4-c]oxazole
LC50: Not available
LD50: Not available
34375-28-5 2-(hydroxymethylamino)ethanol
LC50: Not available
LD50: Oral-rat= 950 mg/kg (vendor); Skin-rabbit= 1,400 mg/kg (vendor)
140-95-4 Dimethylolurea
LC50: Not available
LD50: Oral-rat= 3,400 mg/kg (Sax)
12. Ecological Information
Cascoset FM-7400 Version: 7 Current Issue: 14-JUN-2007 Printed: 19-JUN-2009
Page 5/7
Not determined.
13. Disposal Considerations
Recover free liquid. Absorb residue and dispose of according to local, state/provincial, and
federal requirements.
14. Transport Information
14.1 U.S. Department of Transportation (DOT)
The data provided in this section is for information only and may not be specific to your
package size or mode of transport. You will need to apply the appropriate regulations to
properly classify your shipment for transportation.
Regulation: Non regulated
14.2 Canadian Transportation of Dangerous Goods (TDG)
Regulation: Non regulated
14.3 Other Regulations
ADR/RID
Regulation: Non regulated
IMO/IMDG
Regulation: Non regulated
IATA (Commercial)
Regulation: Non regulated
IATA (Passenger)
Regulation: Non regulated
ADNR
Regulation: Non regulated
15. Regulatory Information (Selected Regulations)
15.1 U.S. Federal Regulations
OSHA Hazards Communication Standard 29CFR1910.1200
This material presents possible health hazards as determined when reviewed according to the
requirements of the Occupational Safety and Health Administration 29 CFR Part 1910.1200
"Hazard Communication" Standard.
SARA Title III: Section 311/312
Immediate health hazard
Delayed health hazard
SARA Title III: Section 313 and 40 CFR Part 372
Cascoset FM-7400 Version: 7 Current Issue: 14-JUN-2007 Printed: 19-JUN-2009
Page 6/7
This product contains the following toxic chemical(s) subject to the reporting requirements of
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986, and
Subpart C-Supplier Notification Requirement of 40 CFR Part 372.
None required per SARA TITLE III SECTION 313.
TSCA Section 8(b) Inventory
All reportable chemical substances are listed on the TSCA Inventory. We rely on certifications
of compliance from our suppliers for chemical substances not manufactured by us.
15.2 Canadian Regulations
Workplace Hazardous Materials Information System (WHMIS)
This product has been classified in accordance with the hazard criteria of the Controlled
Products Regulation (CPR) and the MSDS contains all the information required by the CPR.
Class D2A
Class D2B
Canadian Environmental Protection Act (CEPA)
All reportable chemical substances are listed on the Domestic Substances List (DSL) or
otherwise comply with CEPA new substance notification requirements.
National Pollutant Release Inventory (NPRI)
This product contains the following chemical(s) subject to the reporting requirements of the
Canadian Environmental Protection Act (CEPA) subsection 16(1), National Pollutant Release
Inventory.
None required.
16. Other Information
User's Responsibility
The OSHA Hazard Communication Standard 29CFR 1910.1200 and the Workplace
Hazardous Materials Information System (WHMIS) require that the information contained on
these sheets be made available to your workers. Educate and train your workers regarding
OSHA and WHMIS precautions. Instruct your workers to handle this product properly. Consult
with appropriate experts to guard against hazards associated with use of this product and its
ingredients.
Cascoset FM-7400 Version: 7 Current Issue: 14-JUN-2007 Printed: 19-JUN-2009
Page 7/7
Disclaimer
The information provided herein was believed by Hexion Specialty Chemicals ("Hexion") to be
accurate at the time of preparation or prepared from sources believed to be reliable, but it is
the responsibility of the user to investigate and understand other pertinent sources of
information, to comply with all laws and procedures applicable to the safe handling and use of
the product and to determine the suitability of the product for its intended use. All products
supplied by Hexion are subject to Hexion's terms and conditions of sale. HEXION MAKES NO
WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE
MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING
THE ACCURACY OF ANY INFORMATION PROVIDED BY HEXION, except that the product
shall conform to Hexion's specifications. Nothing contained herein constitutes an offer for the
sale of any product.
and TM Licensed trademarks of Hexion Specialty Chemicals, Inc.
?br>
Cascoset FM-7400 Version: 7 Current Issue: 14-JUN-2007 Printed: 19-JUN-2009
|