X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.03A
DATA
1.-Identification of the chemical and of the manufacturer, importer or other undertaking.
1.1.-Identificacion of the substance on preparation
Trade name: MAXSEAL FLEX (A)
Code of the prepation
1.2.-Identificacion of the manufacturer, importer or other undertaking
1.2.1.-Manufacturer, importer, other undertaking: DRIZORO, S.A.
1.2.2.-Address: C/Primavera, 50-52
Parque Industrial Las Monjas
28850 Torrej髇 de Ardoz, Madrid
Spain
1.2.3.-Name and address of the informant in emergency cases.
Emergency telephone number:
1.2.4.-Information on foreign manufacturer.
2.Composition and information on ingredients
2.1.-Description: Aqueous solution of acrylic polymer
2.2.-Hazardous ingredients:
2.2.1.-CAS number 2.2.2 Name of the 2.2.3.Con- 2.2.4.Warning symbol, R phrases and
or other code ingredients centration other data on the ingredients
2.2.5 Full chemical name of the ingredients (CAS number name) Confidential
Polymer acrylic, CAS number 141-32-2
2.2.6 Other information
Updated: 19-06-03
Date : 22-01-98
Updated number: 3
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.03A
DATA
3. Hazards Identification
Avoid any contact with skin, respiratory system and eyes as it may cause irritations.
Wear suitable clothes (gloves, protective glasses, body-suits,..)
4.First aid measures
4.1 Special instructions
Avoid any prolonged contact with skin, eyes and respiratory system
4.2 Inhalation
Move the patient to a well ventilated place, if breathing stop or artificial respiration is
difficult to do, avoid any vomit will be ingested, lean the head of patient and see a doctor.
4.3 Skin
Remove the product and rinse, the affected area, immediately with plenty of water at least
for 15 minutes. Take the stained clothes off and if symptoms continue, go to see a doctor.
4.4 Splashes in eyes
Hold eyelids apart and clean the eyes right away at least for 15 minutes and see a doctor.
4.5 Ingestion
Go right away to see a doctor, and show this safety data sheet
The decision of inducing or not to vomit, will be based on medical criteria.
4.6 Information ot doctor or other trained persons giving first aid
Treatment will be based on medical criteria, depending on patient's reaction.
5.Fire-Fighting measures.
5.1 Suitable extinguishing media
Water mist, chemist powder, foam, carbon dioxide (CO2)
5.2 Extinguishing media which must not be used for safety reasons.
Plenty of water-blast.
5.3 Special exposure hazards in a fire.
No flammable product. Small quantities of oxides of carbon, nitrogen or cyanides can be
released from combustion.
Neighbours have to be evacuated as well as any person that could be found in the same
direction of wind.
5.4.Special protective equipment for a fire
Firemen must wear boots, gloves and body-suits anti-fire, as well as autonomous
respiratory equipment.
5.5 Other instructions
Retain expended liquids from fire fighting for later disposal.
6.Accidental release measures.
6.1 Personal precautions
Avoid any contact with skin and eyes. Do not breath steams.
Wear protective clothes, such as gloves, boots and protection for eyes (glasses with lateral
fittings)
6.2 Environmental precautions
Avoid the product come into the ground, sewer systems or any kind of water streams (Even
underground).
6.3 Methods for cleaning up
Take with mechanical devices or absorb with suitable products (sand, earth of diatoms,
Vermiculite, etc...).
The residue must be picked up, labelled and removed following laws in force.
6.4 Other instructions
7.Handling and storage
7.1 Handling Do not inhale steams, avoid any contact with skin and eyes, Wear suitable
Updated: 19-06-03
Date : 22-01-98
Updated number: 3
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.03A
DATA
Clothes, take into account laws in force.
7.2 Storage Keep packages perfectly closed and stored in a dry, cool and well ventilated
place with a temperature between 10-35篊.
Protect packaging of frost.
8. Exposure controls / personal protection
8.1 Technical measures for exposure controls.
8.2 Limit values for workplace
8.2.1 HTP values
8.2.2 Other information on limit values
8.3.Personal protective equipment
8.3.1. Special instructions for protection and hygiene
Provide good ventilation in places where storing, handling or applying.
8.3.2. Respiratory protection
No necessary under usual work conditions.
8.3.3 Hand protection
Wear waterproofing gloves.
8.3.4.Eye protection
Wear glasses with lateral protection.
8.3.5.Skin protection
Wear boots and protective waterproofing clothes.
9. Physical and chemical properties.
9.1 Physical state, colour and odour. Milky liquid, characteristic odour.
9.2.pH 7-11
9.3 Information on changes in the physical state.
9.3.1.Boiling point / boiling range Approx. 9.8 Explosive limits a.-Lower
100篊
9.3.2 Melting point / melting range b.- Upper
9.3.3 Decomposition temperature 9.9 .Oxidizing properties
> 160狢
9.4. Flash point
N.A.
Approx. 1
9.5. Flammability (solid / gas) 9.10 Vapour pressure
9.6. Autoflammability 9.11 Relative density 1 ?.05 g/cm3
9.7. Explosion hazard 9.12 Solubility a.-Water solubility
Soluble
b.- Fat solubility
9.13 Partition coefficient (for ingredients) in-octano / water
Updated: 19-06-03
Date : 22-01-98
Updated number: 3
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.03A
DATA
9.14 Viscosity
9.15 Other information
10.Stability and reactivity
10.1 Conditions to avoid
Hazardous reactions when storing or handling according to common industrial practices
are unknown.
Polymer can be decomposed for temperatures above 160篊. Avoid frozen.
10.2 Materials to avoid
N.A.
10.3 Hazardous decomposition products Thermal decomposition may produce acrylic monomers.
11.Toxicological information
11.1 Acute Toxicity
Ingestion DL 50 ?rat > 5000 mg/kg.
Skin DL 50 ?Rabbit > 5000 mg/kg
11.2 Irritancy and corrosiveness
In contact with skin and eyes of rabbit it causes irritations with no consequences.
11.3 Sensitisation
Could take place.
11.4 Subacute, subchronic and prolonged toxicity
N.A.
11.5 Empirical data on effects on humans
11.6 Other information on health effects
12.Ecological information
12.1 Persistence in the environment
12.1.1 Biodegradation This product is not biodegraded although easily bioeliminated.
12.1.2 Chemical degradation The product is stable.
12.2 Bioaccumulation This product is not bioaccumulated.
Updated: 19-06-03
Date : 22-01-98
Updated number: 3
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.03A
DATA
12.3 Mobility
This product is stable.
12.4 Toxic effects on organisms
12.4.1 Aquatic toxicity
Avoid the product comes into the sewage system or any superficial or underground
scream.
12.4.2 Other toxicity
12.5.Other information
13. Disposal considerations
Disposal according to legislation in force, residue has to be properly labelling.
Take with mechanical devices or absorb with suitable products.
Solution can be coagulated with gradual addition of chloride ferric and lime, and dispose
the residue according to legislation in force.
14.Transport information
14.1 UN number No classified like hazardous merchandise.
14.2 Packaging category
14.3 Land transport
14.3.1 Transport class
14.3.2 Risk code
14.3.3 Name according to bill of freight
14.3.4 Other information
14.4 Sea transport
14.4.1 IMDG class
14.4.2 Correct technical name
14.4.3 Other information
Updated: 19-06-03
Date : 22-01-98
Updated number: 3
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.03A
DATA
14.5 Air transport
14.5.1 IDAO / IATA class
14.5.2 Correct technical name
14.5.3 Other information
15.Regulatory information
15.1Information on the warning label
15.1.1 Letter code of the warning symbol and indications of danger for the preparation.
Label is not required.
15.1.2 Names of the ingredients given on the warning label
15.1.3 R phrases.
15.1.4 S phrases
S36/37/39 (Wear clothes, suitable gloves and protections on eyes and face)
15.1.5 Special regulations on certain preparations
15.2 National regulations
16. Other information
16.1 Purpose of use
16.1.1 Expressed in writing
16.1.2 Code for the purpose of use
SIC 1: KT 1:
Sic (TOL)-Standard industrial classification SIC 2: KT 2:
KT ?Desired effect of the chemical SIC 3: KT 3:
SIC 4: KT 4:
16.2 Directions for use
16.3 Other information
This product must be stored, handled and used on the basis of a good industrial hygiene,
according to legislation in force. The information provided in this safety data sheet is
based on our actual knowledge state and try to describe our product from the point of view
of safety requirements. It cannot perform as a guarantee of specific properties
Updated: 19-06-03
Date : 22-01-98
Updated number: 3
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.03A
DATA
16.4 Additional information available from
16.5 Sources of information used in the compilation of the safety data sheet
Data from suppliers and bibliographic sources.
Date 22 July 2002
Signature
Updated: 19-06-03
Date : 22-01-98
Updated number: 3
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.02B
DATA
1.-Identification of the chemical and of the manufacturer, importer or other undertaking.
1.1.-Identificacion of the substance on preparation
Trade name: MAXSEAL FLEX (B)
Code of the preparation
1.2.-Identificacion of the manufacturer, importer or other undertaking
1.2.1.-Manufacturer, importer, other undertaking: DRIZORO, S.A.
1.2.2.-Address: C/Primavera, 50-52
Parque Industrial Las Monjas
28850 Torrej髇 de Ardoz, Madrid
Spain
1.2.3.-Name and address of the informant in emergency cases.
Emergency telephone number:
1.2.4.-Information on foreign manufacturer.
2.Composition and information on ingredients
2.1.-Description:
2.2.-Hazardous ingredients:
2.2.1.-CAS number 2.2.2 Name of the 2.2.3.Con- 2.2.4.Warning symbol, R phrases and
or other code ingredients centration other data on the ingredients
2.2.5 Full chemical name of the ingredients (CAS number name) Confidential
Portland Cement Compound CAS: 65997-15-1
Other classification: EINECS 266-043-4
2.2.6 Other information
3. Hazards Identification
Updated: 11-11-02
Date : 22-01-98
Updated number: 2
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.02B
DATA
Avoid any contact with skin, respiratory system and eye, as it causes irritations.
Do not breath powder.
Use suitable clothing (gloves, protection glasses, overalls, etc).
4.First aid measures
4.1 Special instructions
4.2 Inhalation
Move the patient to a well ventilated place. If breathing stop or artificial respiration is
difficult to do, avoid any vomit will be ingested, lean the head of patient and see a doctor.
4.3 Skin
Remove the product and rinse, the affected area, immediately with plenty of water at least
for 15 minutes. Take the stained clothes off and if symptoms continue, go to see a doctor.
4.4 Splashes in eyes
Hold eyelids apart and clean the eyes right away with plenty of water at least for 15 minutes
and see a doctor.
4.5 Ingestion
Seek medical advice and show this safety data sheet.
The decision of inducing or not to vomit, will be based on medical criteria.
4.6 Information of doctor or other trained persons giving first aid
Treatment will be based on medical criteria according to the reactions of the patient.
5.Fire-Fighting measures.
5.1 Suitable extinguishing media
Extinguishing media water mist, CO2, chemist powder, foam.
5.2 Extinguishing media which must not be used for safety reasons.
Do not use water-blast.
5.3 Special exposure hazards in a fire.
Non flammable material. Toxic products from combustion can be released, as oxides of
carbon and nitrogen.
Neighbours have to be evacuated as well as any person that could be found in the same
direction of wind.
5.4.Special protective equipment for a fire
As usual in these circumstances: Wear anti-fire suites and autonomous respiratory
equipment.
5.5 Other instructions
Retain expended liquids from fire fighting for later disposal.
6.Accidental release measures.
6.1 Personal precautions
Avoid powder spreads out. Do not breathe powder and avoid contact with skin and eyes.
Use protective clothing as well as booths, gloves and protection for eyes (protection
glasses with lateral setting). Use powder mask filter.
6.2 Environmental precautions
Avoid product penetrates into the ground, sewer system or in-shore waters.
6.3 Methods for cleaning up
Updated: 11-11-02
Date : 22-01-98
Updated number: 2
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.02B
DATA
The product remains on site when is poured (risk of powder spreads). Do not use water.
Pick up with mechanical devices.
Dispose according with laws in force.
6.4 Other instructions
7.Handling and storage
7.1 Handling
Do not breath powder. Wear suitable clothing and use powder mask filter. Consider
applicable law.
7.2 Storage
Keep packages well closed and in a dry, fresh and well ventilated place.
Protect against humidity.
8. Exposure controls / personal protection
8.1 Technical measures for exposure controls.
8.2 Limit values for workplace
8.2.1 HTP values
Silica quartz---- TLV-TWA: 0.1 mg / m3 ,Respirable powder.
Portland cement --- TLV-TWA: 10 mg / m3 , Total powder.
8.2.2 Other information on limit values
8.3.Personal protective equipment
8.3.1. Special instructions for protection and hygiene
Provide good ventilation in storing, handling and use places.
8.3.2. Respiratory protection
Powder mask filter.
8.3.3 Hand protection
Use waterproof gloves.
8.3.4.Eye protection
Goggles with lateral protection.
8.3.5.Skin protection
Wear waterproof protective suite and boots.
9. Physical and chemical properties.
9.1 Physical state, colour and odour. Odourless powder.
9.2.pH
9.3 Information on changes in the physical state.
9.3.1.Boiling point / boiling range 9.8 Explosive limits a.-Lower
9.3.2 Melting point / melting range b.- Upper
Updated: 11-11-02
Date : 22-01-98
Updated number: 2
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.02B
DATA
9.3.3 Decomposition temperature 9.9 .Oxidising properties
9.4. Flash point N.A.
9.5. Flammability (solid / gas) 9.10 Vapour pressure
9.6. Autoflammability 9.11 Relative density
9.7. Explosion hazard 9.12 Solubility a.-Water solubility In contact with water
precipitates.
b.- Fat solubility
9.13 Partition coefficient (for ingredients) in-octano / water
9.14 Viscosity
9.15 Other information
10.Stability and reactivity
10.1 Conditions to avoid
No danger reactions are known while storing and handling according to the common
industrial practise.
Protect against humidity.
10.2 Materials to avoid
N.A.
10.3 Hazardous decomposition products
The product reacts with water, precipitating as stable hydrates.
11.Toxicological information
11.1 Acute Toxicity
Avoid breath powder.
11.2 Irritancy and corrosiveness
In contact with skin, eyes or respiratory system may cause irritations.
11.3 Sensitization
Low probability.
11.4 Subacute, subchronic and prolonged toxicity
N.A.
11.5 Empirical data on effects on humans
11.6 Other information on health effects
Updated: 11-11-02
Date : 22-01-98
Updated number: 2
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.02B
DATA
12.Ecological information
12.1 Persistence in the environment
12.1.1 Biodegradation This product is not biodegradable.
12.1.2 Chemical degradation Acids decomposes this product resulting CO2.
12.2 Bioaccumulation
It is not bioaccumulable.
12.3 Mobility This product is stable.
12.4 Toxic effects on organisms
12.4.1 Aquatic toxicity
The product precipitates in contact with water as stable hydrates.
Avoid product penetrates into sewer system.
12.4.2 Other toxicity
12.5.Other information
13. Disposal considerations
Dispose according to laws in force. Pick up with mechanical devices. In contact with water
the product precipitates.
Updated: 11-11-02
Date : 22-01-98
Updated number: 2
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.02B
DATA
14.Transport information
14.1 UN number No classified like hazardous merchandise.
14.2 Packaging category
14.3 Land transport
14.3.1 Transport class
14.3.2 Risk code
14.3.3 Name according to bill of freight
14.3.4 Other information
14.4 Sea transport
14.4.1 IMDG class
14.4.2 Correct technical name
14.4.3 Other information
14.5 Air transport
14.5.1 IDAO / IATA class
14.5.2 Correct technical name
14.5.3 Other information
15.Regulatory information
15.1Information on the warning label
15.1.1 Letter code of the warning symbol and indications of danger for the preparation.
Label is not required.
15.1.2 Names of the ingredients given on the warning label
15.1.3 R phrases.
15.1.4 S phrases
S 22 ?Do not breathe the powder.
S 7/8 ?Keep packing well closed. Store in a dry place.
S 36/37 ?Wear suitable clothes and protection gloves.
15.1.5 Special regulations on certain preparations
15.2 National regulations
Updated: 11-11-02
Date : 22-01-98
Updated number: 2
X
SAFETY DATA SHEET
R-PG 10/01
INFORMATION FORM CHEMICALS Ref.SDS29.02B
DATA
16. Other information
16.1 Purpose of use
16.1.1 Expressed in writing
16.1.2 Code for the purpose of use
SIC 1: KT 1:
Sic (TOL)-Standard industrial classification SIC 2: KT 2:
KT ?Desired effect of the chemical SIC 3: KT 3:
SIC 4: KT 4:
16.2 Directions for use
16.3 Other information
This product must be stored, handled and used on the basis of a good industrial hygiene,
according to legislation in force. The information provided in this safety data sheet is
based on our actual knowledge state and try to describe our product from the point of view
of safety requirements. It cannot perform as a guarantee of specific properties
16.4 Additional information available from
16.5 Sources of information used in the compilation of the safety data sheet
Data from suppliers and bibliographic sources.
Date
Signature
Updated: 11-11-02
Date : 22-01-98
Updated number: 2
|