Material Safety Data Sheet CS: 1.4.93
1 of 5
Page:
LPWG5
Infosafe NoTM Issue Date : March 2010 ISSUED by PARCHEMC
Product Name :LEAKMASTER
Classified as hazardous
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
LEAKMASTER
Product Name
Parchem Construction Supplies Pty Ltd (ABN 80 069 961 968)
Company Name
Address 7 Lucca Road Wyong
NSW 2259 Australia
1800 638 556 (available 24/7)
Emergency Tel.
Tel: 02 4350 5000
Telephone/Fax
Fax: 02 4351 2024
Number
Gun applied hydrophilic waterstop.
Recommended Use
Other Information This MSDS summarises at the date of issue our best knowledge of the health and
safety hazard information of the product, and in particular how to safely
handle and use the product in the workplace. Since Parchem Construction
Supplies Pty Ltd cannot anticipate or control the conditions under which the
product may be used, each user must, prior to usage, review this MSDS in the
context of how the user intends to handle and use the product in the
workplace.
If clarification or further information is needed to ensure that an
appropriate assessment can be made, the user should contact this company.
Our responsibility for product as sold is subject to our standard terms and
conditions, a copy of which is sent to our customers and is also available
upon request.
www.parchem.com.au
2. HAZARDS IDENTIFICATION
Classified as hazardous
Hazard
HAZARDOUS SUBSTANCE.
Classification
NON-DANGEROUS GOODS.
Hazard classification according to the criteria of NOHSC.
Dangerous goods classification according to the Australia Dangerous Goods
Code.
Risk Phrase(s) Classified as hazardous
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
R64 May cause harm to breastfed babies.
R66 Repeated exposure may cause skin dryness and cracking.
Safety Phrase(s) S24 Avoid contact with skin.
S53 Avoid exposure - obtain special instructions before use.
S61 Avoid release to the environment. Refer to special instructions/safety
data sheet.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Polyurethane based water sealing caulking compound.
Information on
Composition
Name CAS Proportion Hazard Symbol Risk Phrase
Ingredients
85535-85-9 10-20 %
C14-17
chlorinated
alkanes
(chlorination:52%
)
Petroleum solvent 64742-94-5 <10 %
m-Xylene 108-38-3 0-5 %
Balance
Other ingredients
determined not be
hazardous
4. FIRST AID MEASURES
Inhalation If inhaled, remove to fresh area. Keep at rest until recovered. If symptoms
persist seek medical attention.
Print Date: 1/04/2010 CS: 1.4.93
Material Safety Data Sheet CS: 1.4.93
2 of 5
Page:
LPWG5
Infosafe NoTM Issue Date : March 2010 ISSUED by PARCHEMC
Product Name :LEAKMASTER
Classified as hazardous
Ingestion Do NOT induce vomiting. Immediately wash out mouth with water. If symptoms
develop seek medical attention.
Skin Wash affected area thoroughly with soap and water. Remove contaminated
clothing and wash before reuse or discard. If symptoms develop seek medical
attention.
Eye If in eyes, hold eyelids apart and flush the eyes continuously with running
water. Continue flushing for several minutes until all contaminants are washed
off completely. Seek medical attention.
Normal washroom facilities.
First Aid Facilities
Treat symptomatically.
Advice to Doctor
5. FIRE FIGHTING MEASURES
Use carbon dioxide, dry chemical or foam.
Suitable
Extinguishing Media
Under fire conditions this product may emit toxic and/or irritating fumes
Hazards from
including carbon monoxide, carbon dioxide, amine and ammonia.
Combustion
Products
Combustible substance. This product will burn if exposed to fire.
Specific Hazards
Fire-fighters should wear full protective clothing and self contained
Precautions in
breathing apparatus (SCBA) operated in positive pressure mode. Water spray may
connection with Fire
be used to keep fire exposed containers cool.
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate personal protective equipment and clothing to minimise
Emergency
exposure. Extinguish or remove all sources of ignition and stop leak if safe
Procedures
to do so. Increase ventilation. Evacuate all unprotected personnel. If
possible contain the spill. Wipe up or scrape up and contain for salvage or
disposal. Final cleaning may require use of steam, solvents or detergents.
Dispose of saturated absorbent or cleaning material appropriately. Dispose of
waste according to federal, Environmental Protection Authority and state
regulations. If this material enter the waterways contact the Environmental
Protection Authority, or your local Waste Management Authority.
7. HANDLING AND STORAGE
Use in a well ventilated area. Build up of mists or vapours in the atmosphere
Precautions for Safe
must be prevented. Avoid breathing in mists or vapours. Do not use near
Handling
welding or other ignition sources and avoid sparks. Do not smoke. Wear
appropriate protection. It is essential that all who come into contact with
this material maintain high standards of personal hygiene ie. washing hands
prior to eating, drinking, smoking or using toilet facilities.
Store in a cool, dry well-ventilated area away from heat, sources of ignition
Conditions for Safe
and oxidising agents. Keep containers closed when not in use and securely
Storage
sealed and protected against physical damage. Inspect regularly for
deficiencies such as damage or leaks. Do NOT pressurise, cut, heat or weld
containers as they may contain hazardous residues.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
No exposure standards have been established for this material by the National
National Exposure
Occupational Health And Safety Commission (NOHSC). However, exposure standards
Standards
for ingredients are stated above:
The recommended exposure limits for the constituents are listed below.
New Zealand Occupational Safety and Health Service Workplace Exposure
Standards (OSH):
Substance TWA STEL NOTICES
ppm mg/m? ppm mg/m?br>
m-Xylene 50 217 - - -
The manufacturer recommends the following exposure limits for Petroleum
Solvent:
Substance TWA STEL NOTICES
Print Date: 1/04/2010 CS: 1.4.93
Material Safety Data Sheet CS: 1.4.93
3 of 5
Page:
LPWG5
Infosafe NoTM Issue Date : March 2010 ISSUED by PARCHEMC
Product Name :LEAKMASTER
Classified as hazardous
ppm mg/m? ppm mg/m?br>
Petroleum Solvent 100 525 - - -
TWA (Time Weighted Average): The average airborne concentration of a
particular substance when calculated over a normal eight-hour working day, for
a five-day week.
STEL (Short Term Exposure Limit): The average airborne concentration over a 15
minute period which should not be exceeded at any time during a normal
eight-hour workday.
No biological limit allocated.
Biological Limit
Values
Under normal operations, general ventilation should be adequate. If mists or
Engineering
vapours are generated a local exhaust ventilation system, drawing vapours and
Controls
mists away from workers' breathing zone, should be used.
Not required under normal conditions in a well-ventilated workplace. If
Respiratory
engineering controls are not effective in controlling airborne exposure then
Protection
respiratory protective equipment should be used suitable for protecting
against airborne contaminants. Final choice of appropriate breathing
protection is dependant upon actual airborne concentrations and the type of
breathing protection required will vary according to individual circumstances.
Expert advice may be required to make this decision. Reference should be made
to Australian Standards AS/NZS 1715, Selection, Use and maintenance of
Respiratory Protective Devices; and AS/NZS 1716, Respiratory Protective
Devices.
Eye Protection Safety glasses with side shields or chemical goggles as appropriate
recommended. Final choice of appropriate eye/face protection will vary
according to individual circumstances i.e. methods of handling or engineering
controls and according to risk assessments undertaken. Eye protection should
conform with Australian/New Zealand Standard AS/NZS 1337 - Eye Protectors for
Industrial Applications.
Hand Protection Wear gloves of impervious material. Final choice of appropriate gloves will
vary according to individual circumstances i.e. methods of handling or
according to risk assessments undertaken. Reference should be made to AS/NZS
2161.1: Occupational protective gloves - Selection, use and maintenance.
Body Protection Wear appropriate clothing including chemical resistant apron where clothing is
likely to be contaminated. It is advisable that a local supplier of personal
protective clothing is consulted regarding the choice of material.
9. PHYSICAL AND CHEMICAL PROPERTIES
Gray paste
Appearance
Petroleum like odour
Odour
Not available
Melting Point
Not available
Boiling Point
Insoluble
Solubility in Water
Soluble in petroleum solvent
Solubility in Organic
Solvents
Not available
pH Value
Not available
Vapour Pressure
Not available
Vapour Density
(Air=1)
100,000-250,000 cps
Viscosity
1.20-1.30 g/cm?br>
Density
Not available
Flash Point
Combustible substance. This product will burn if exposed to fire.
Flammability
Not available
Auto-Ignition
Temperature
Print Date: 1/04/2010 CS: 1.4.93
Material Safety Data Sheet CS: 1.4.93
4 of 5
Page:
LPWG5
Infosafe NoTM Issue Date : March 2010 ISSUED by PARCHEMC
Product Name :LEAKMASTER
Classified as hazardous
Not available
Flammable Limits -
Lower
Not available
Flammable Limits -
Upper
10. STABILITY AND REACTIVITY
Stable under normal conditions.
Chemical Stability
Heat, flames and other ignition sources.
Conditions to Avoid
Strong oxidising agents.
Incompatible
Materials
Thermal decomposition may result in the release of toxic and/or irritating
Hazardous
fumes including carbon dioxide, carbon monoxide, nitric oxide and ammonia.
Decomposition
Products
Hazardous Reactions Exothermic reaction with amine and alcohol. Evolving carbon dioxide react with
water.
Will not occur.
Hazardous
Polymerization
11. TOXICOLOGICAL INFORMATION
No toxicity data are available for this specific product. The available data
Toxicology
for the ingredients are as follows:
Information
For Xylene:
LD50 (Oral, Rat): 5000 mg/kg
LD50 (Dermal, Rabbit): 5000 mg/kg
LC50 (Inhalation, Rat): 8000 ppm/4h
For Petroleum Solvent:
LD50 (Oral, Rat): 200-2,000 mg/kg
LD50 (Dermal, Rabbit): 2,000 mg/kg
LC50 (Inhalation, Rat): 2-5 mg/L
Inhalation Inhalation of product mist may cause irritation of the nose, throat and
respiratory system.
Ingestion Ingestion of this product may irritate the gastric tract causing nausea and
vomiting.
May cause redness, itching and irritation.
Skin
May cause eye irritation, tearing, stinging, blurred vision, and redness.
Eye
Repeated exposure may cause skin dryness and cracking.
Chronic Effects
May cause harm to breastfed babies.
Reproductive
Toxicity
12. ECOLOGICAL INFORMATION
Ecotoxicity Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
Not available
Persistence /
Degradability
Not available
Mobility
Avoid contaminating waterways.
Environ. Protection
13. DISPOSAL CONSIDERATIONS
Dispose of waste according to federal, EPA and state regulations.
Disposal
Considerations
14. TRANSPORT INFORMATION
Not classified as a Dangerous Good according to the Australian Code for the
Transport
Transport of Dangerous Goods by Road and Rail.
Information
Marine Transport:
Not classified as Dangerous Goods by the criteria of the International
Maritime Dangerous Goods Code (IMDG Code) for transport by sea.
Print Date: 1/04/2010 CS: 1.4.93
Material Safety Data Sheet CS: 1.4.93
5 of 5
Page:
LPWG5
Infosafe NoTM Issue Date : March 2010 ISSUED by PARCHEMC
Product Name :LEAKMASTER
Classified as hazardous
Air Transport (ICAO/IATA):
Not classified as Dangerous Goods by the criteria of the International Air
Transport Association (IATA) Dangerous Goods Regulations for transport by air.
15. REGULATORY INFORMATION
Classified as Hazardous according to criteria of National Occupational Health
Regulatory
& Safety Commission (NOHSC), Australia.
Information
Not classified as a Scheduled Poison according to the Standard for the Uniform
Scheduling of Drugs and Poisons (SUSDP).
Not Scheduled
Poisons Schedule
Harmful,Dangerous for the environment
Hazard Category
16. OTHER INFORMATION
MSDS reviewed: March 2010
Date of preparation
Supersedes: June 2007
or last revision of
MSDS
Technical Support: 1800 812 864
Contact Person/Point
...End Of MSDS...
?Copyright ACOHS Pty Ltd
Copyright in the source code of the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe MSDS displayed is the intellectual
property of Acohs Pty Ltd.
Copyright in the layout, presentation and appearance of each Infosafe MSDS displayed is the intellectual property of Acohs Pty Ltd.
The compilation of MSDS's displayed is the intellectual property of Acohs Pty Ltd.
Copying of any MSDS displayed is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed cannot be copied for the purpose of
sale or licence or for inclusion as part of a collection of MSDS without the express written consent of Acohs Pty Ltd.
Print Date: 1/04/2010 CS: 1.4.93
|