Material Safety
Data Sheet P. O. Box 1528 MOUNT AIRY, NC 27030-1528
336-789-9161 FAX 336-789-9586 www.NCFI.com
Dalton, GA Hickory, NC High Point, NC Mount Airy, NC Salt Lake City, UT
PRODUCT IDENTIFICATION
Trade Name: NCFI 70-021 Series Chemical Family: Acrylic Resin System
Chemical Name: Mixture Formula: N/A
Date Prepared: 06/20/07
Synonyms: Acrylic Coating
INGREDIENTS-HAZARD CLASSIFICATION
Name: CAS NO. % PEL & TLV Vapor Pressure
5.1 mmHg @ 68oF
Xylene 1330-20-7 25 100 ppm
See `Health Hazard' and `Special Protection' Sections
1. This product contains the following chemicals which are subject to reporting under Section 313 of
Title III: XYLENE
2. All other chemicals in this product are Trade Secrets and are not regulated as hazardous by any state
Right-to-Know law.
Transport Information
Domestic (Land, D.O.T.)
-----------------------
Proper Shipping Name: PAINT, FLAMMABLE LIQUID
Hazard Class: 3
UN/NA: UN1263
Packing Group: II
Information reported for product/size: 398LB
International (Water, I.M.O.)
-----------------------------
Proper Shipping Name: PAINT, FLAMMABLE LIQUID
Hazard Class: 3
UN/NA: UN1263
Packing Group: II
Information reported for product/size: 398LB
Regulatory Information
--------\Chemical Inventory Status - Part 1\---------------------------------
Ingredient TSCA EC Japan Australia
----------------------------------------------- ---- --- ----- ---------
m-Xylene (108-38-3) Yes Yes Yes Yes
o-Xylene (95-47-6) Yes Yes Yes Yes
p-Xylene (106-42-3) Yes Yes Yes Yes
Ethyl Benzene (100-41-4) Yes Yes Yes Yes
--------\Chemical Inventory Status - Part 2\---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
----------------------------------------------- ----- --- ---- -----
m-Xylene (108-38-3) Yes Yes No Yes
o-Xylene (95-47-6) Yes Yes No Yes
p-Xylene (106-42-3) Yes Yes No Yes
Ethyl Benzene (100-41-4) Yes Yes No Yes
--------\Federal, State & International Regulations - Part 1\----------------
-SARA 302- ------SARA 313------
Ingredient RQ TPQ List Chemical Catg.
----------------------------------------- --- ----- ---- --------------
m-Xylene (108-38-3) No No Yes No
o-Xylene (95-47-6) No No Yes No
p-Xylene (106-42-3) No No Yes No
Ethyl Benzene (100-41-4) No No Yes No
--------\Federal, State & International Regulations - Part 2\----------------
-RCRA- -TSCA-
Ingredient CERCLA 261.33 8(d)
----------------------------------------- ------ ------ ------
m-Xylene (108-38-3) 1000 No No
o-Xylene (95-47-6) 1000 No No
p-Xylene (106-42-3) 100 No Yes
Ethyl Benzene (100-41-4) 1000 No No
Chemical Weapons Convention: No TSCA 12(b): Yes CDTA: No
SARA 311/312: Acute: Yes Chronic: Yes Fire: Yes Pressure: No
Reactivity: No (Mixture / Liquid)
WARNING:
THIS PRODUCT CONTAINS A CHEMICAL(S) KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE CANCER.
Poison Schedule: None allocated.
PHYSICAL DATA
Vapor Density: Heavier than Air
Boiling Point (癋): 281 - 284癋
Weight per Gallon: 9.1 ?9.3
Evaporation Rate: Slower than Ether
% Volatile by Volume: 31.6
FIRE AND EXPLOSION HAZARD DATA
Flash Point (test method): 80癋 (CC) LEL/UEL: 1%/7%
Extinguishing Media: CO2, Dry Chemical or fog
Special Fire Fighting Procedures: Use supplied air breathing equipment for enclosed areas. Cool exposed
containers with water spray.
Unusual Fire and Explosion Hazards: Do not mix with strong oxidants such as liquid chlorine or
concentrated oxygen. Empty container may hold explosive vapors.
REACTIVITY DATA
Stability: Stable Conditions to Avoid: N/A
Polymerization: May occur; contact with moisture or other materials which react with isocyanates form
CO2 and develop pressure.
Incompatibility: Incompatible with strong oxidizers, water, or alcohol.
Hazardous Decomposition Products: When burned; CO, CO2, and other toxic fumes.
Conditions to Avoid: Open flames, hot surfaces, sparks.
HEALTH HAZARD DATA
Permissible Exposure Limit: 100 ppm TLV for xylene.
Effects of Overexposure: Inhalation ?nasal and respiratory irritation, dizziness, fatigue, unconsciousness,
asphyxiation. Skin ?Possible irritation, dermatitis, and defatting. Ingestion ?Can cause gastrointestinal
disorders.
Note: Adhesive cures on moist skin in 5 ?10 minutes. Remove immediately with rubbing alcohol.
Adhesive cured on skin can be scrubbed off after 24 ?48 hours.
FIRST AID PROCEDURES
Eyes: Flush with water for at least 15 minutes. See a physician if irritation develops.
Skin: Remove affected clothing, flush with water for at least 15 minutes.
Inhalation: Move to fresh air if symptoms develop. If breathing is difficult, give
oxygen and call physician.
Ingestion: DO NOT induce vomiting; get medical attention.
SPECIAL PROTECTION INFORMATION
Ventilation: Use adequate ventilation to keep concentration of vapors below exposure limits.
Respiratory Protection: Use NIOSH approved vapor canister or supplied-air respiratory protection in
confined spaces that are not ventilated.
Eye Protection: Goggles or chemical safety glasses or face shield.
Gloves: Use protective gloves if needed to avoid skin irritation.
Other: Keep solvent concentration in working atmosphere below TLV.
SPILL OR LEAK PROCEDURES
Small Spill: Remove with absorbent material.
Large Spill: Eliminate all ignition sources. Ventilate enclosed areas or wear self-contained-breathing-
apparatus. Recover free liquid in closed containers. Keep out of sewers and water courses. Clean area with
absorbent material.
Waste Disposal: Dispose of absorbed material at an approved disposal site or facility according to state and
local regulations.
SPECIAL PRECAUTIONS
Store between 45癋 and 85癋 out of sunlight. Keep container cool and dry. Use and store this product with
adequate ventilation. Keep product containers closed tight when not in use.
This information is furnished without warranty, expressed, or implied, except that it is accurate to the best knowledge of NCFI.
The data on this sheet relates only to the specific material designated herein. NCFI assumes no legal responsibility for use or
reliance upon these data.