MATERIAL SAFETY DATA SHEET
Date Printed: 07/28/2008
Product Code(s): 4361, -4, -5, -9
1. CHEMICAL PRODUCT AND COMPANY INFORMATION
Product Name: Quick Dry Rubberized Undercoat
Product Code(s): 4361, -4, -5, -9
Distributor in New Zealand
Manufacturer/Supplier:
TRANSTAR AUTOBODY TECHNOLOGIES R A Johnstone & Co Ltd
2040 Heiserman Dr. 739 Great South Road, Otahuhu
Brighton, MI, 48114, USA
PO Box 97 948 SAMC. Manukau 2240
Auckland. New Zealand
24 Hour Emergency Phone(s):
800-424-9300 (CHEMTREC), Ph :+64 9 261 0333
613-996-6666 (CANUTEC) Fax: + 64 9 261 0330
www.raj.co.nz
Business Phone: 810-220-3000
Emergency telephone in New Zealand (24 hours)
National Poison Center: 0800 POISON [764 766]
Product Use: Undercoating
MSDS Prepared By: Transtar Autobody Technologies
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient(s) CAS Number % by Weight
---------------------------------------------------------------------------
* Hexane 110-54-3 25- 40%
* Methylbenzene; Toluene 108-88-3 10- 15%
Asphalt 8052-42-4 10- 15%
Calcium Carbonate 1317-65-3 5 - 10%
Styrene Modified Alkyd Proprietary 5 - 10%
Aliphatic Petroleum Distillates 64742-89-8 0 - 5%
Organophilic Clay NA 0 - 5%
Aliphatic Hydrocarbons (Stoddard Type) 8052-41-3 0 - 5%
Carbon Black 1333-86-4 0 - 5%
* m-Xylene 108-38-3 0 - 5%
Ethyl Benzene 100-41-4 0 - 5%
See Section 15. Regulatory Information for code descriptions
Weight percent (%) of 0.0 means chemical is in trace amounts.
3. HAZARDS IDENTIFICATION
DANGER! FLAMMABLE. IRRITANT.
Safety Data Sheet - Quick Dry Rubberized Undercoat Page 1 of 7
HMIS Hazard Ratings: Health =2*, Flammability =3, Chemical Reactivity =0
Note: HMIS ratings involve data and interpretations that may vary
from company to company. They are intended only for rapid, general
identification of the magnitude of the specific hazard. To deal
adequately with the safe handling of this material, all the
information contained in this MSDS must be considered.
Potential Health Effects
Eyes: Moderate irritation to the eyes. Exposure can cause redness and
itching.
Skin: Moderate irritation to the skin. May be absorbed through the skin
causing liver, kidney, central nervous system damage. Prolonged contact
with this product can cause reddening, swelling, rash scalling or
blistering.
Inhalation: Moderate irritation to the respiratory system. May be harmful
if inhaled. High concentrations may be fatal.
Ingestion: Moderate irritation to the digestive tract.
The HSNO Approval Number for this Group Standard is HSR002662.
4. FIRST AID MEASURES
Seek professional medical attention for all over-exposures and/or
persistent problems.
Eyes Contact: Flush eyes with clean water for a minimum of 15 minutes.
Seek medical attention.
Skin Contact: Wash exposed area thoroughly with soap and water.
Inhalation: Remove person from area to fresh air. If breathing
difficulty persists, seek medical attention.
Ingestion: DO NOT INDUCE VOMITTING. Seek immediate medical attention.
5. FIRE FIGHTING MEASURES
Flammable Properties
Flash Point: -10 Deg F, -23 Deg CMethod: TCC
Upper Explosive Limit (UEL): 13.3
Lower Explosive Limit (LEL): 0.8
Autoignition Temperature: No data
Extinguishing Media: Foam, Alcohol Foam, CO2, Dry Chemical, Water Fog,
Other.
Special Firefighting Procedures: Full fire fighter equipment including
SCBA should be worn to avoid skin contact and inhalation of
concentrated vapors. Minimize skin exposure. Highly toxic fumes may
be generated by thermal decomposition. Water runoff from firefighting
can cause environmental damage. Dike and collect water used to fight
fire.
Safety Data Sheet - Quick Dry Rubberized Undercoat Page 2 of 7
Hazardous Combustion Products: Carbon monoxide, carbon dioxide, oxides
of nitrogen.
Unusual Fire and Explosion Hazards: Vapors can travel to a source of
ignition and flash back. Closed containers may explode when exposed
to extreme heat or burst when contaminated with water (CO2 gas
evolved). Hazards apply to empty containers. Combustion generates
toxic fumes.
6. ACCIDENTAL RELEASE MEASURES
For large spills or transportation accidents involving release of this
product, contact the Emergency Response Center: 800-424-9300.
Eliminate all sources of ignition, provide adequate ventilation, dike
spill area and add absorbent earth or sawdust to spilled liquid. Sweep
up and dispose of in appropriate containers in accordance with
Federal, State and/or Local regulations.
7. HANDLING AND STORAGE
Use non-sparking tools and explosion proof equipment when handling
this material. Avoid hot surfaces. Use in cool, well-ventilated
areas. Keep containers closed when not in use. Keep away from
excessive heat and open flames. Follow all MSDS/label precautions
even after container is emptied because they may retain product
residues. Store in a cool area away from heat and flames. Do not
reuse container when empty.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Chemical Name/Exposure Limits CAS Number
---------------------------------------------------------------------------
* Hexane 110-54-3
OSHA PEL: 500 ppm, ACGIH TLV: 50 ppm,skin
IDLH 1100 ppm (10% LEL)
* Methylbenzene; Toluene 108-88-3
OSHA PEL: 200 ppm, 300 ppm ceiling
ACGIH TLV: 50 ppm (skin)
IDLH: 500 ppm
Asphalt 8052-42-4
OSHA PEL: NE, ACGIH TLV: 0.5 mg/m3
Calcium Carbonate 1317-65-3
OSHA PEL: NA, ACGIH TLV: NA, OTHER: NA
Styrene Modified Alkyd Proprietary
Aliphatic Petroleum Distillates 64742-89-8
Organophilic Clay NA
Aliphatic Hydrocarbons (Stoddard Type) 8052-41-3
OSHA PEL: 500 ppm, ACGIH TLV: 100 ppm, NIOSH: 350 mg/M3
IDLH: 20,000 mg/M3
Carbon Black 1333-86-4
ACGIH TLV TWA 3.5 mg/m3
Safety Data Sheet - Quick Dry Rubberized Undercoat Page 3 of 7
OSHA PEL TWA 3.5 mg/m3
* m-Xylene 108-38-3
OSHA PEL 100 ppm TWA, 150 ppm STEL
ACGIH TLV 100 ppm TWA, 150 ppm STEL
Ethyl Benzene 100-41-4
OSHA PEL: 100 ppm, ACGIH TLV: 100 ppm, STEL 125ppm
NIOSH: 100ppm STEL 125ppm, IDLH: 800 ppm
Engineering Controls: General mechanical ventilation or local exhaust
should be utilized to keep vapor concentrations below exposure limits
(PEL & TLV). Ventilation equipment must be explosion proof.
Respiratory Protection: When working with this material use a
MSHA/NIOSH approved cartridge respirator or suitable respiratory
protection to keep airborne mists and vapor concentrations below the
PEL & TLV limits. When using in poorly ventilated and confined
spaces, use a fresh-air supplying respirator or a self-contained
breathing apparatus.
Eye Protection: Use safety glasses with chemical splash goggles or
faceshield.
Skin Protection: Use chemical resistant gloves.
Safe Work Practices: Eye washes and safety showers in the workplace
are recommended. Avoid contact with skin and eyes. Avoid breathing
vapors. Wash hands thoroughly after using and before eating, drinking
or smoking. Employee education and training in the safe use and
handling of this product is required under the OSHA Hazard
Communication Standard 29CFR1200. Smoking in area where this material
is used should be strictly prohibited. Always use protective clothing
and equipment. Remove all contaminated clothing and wash thoroughly
when finished working. Keep food and drink away from material and
from area where material is being used.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical Form: Homogeneous mixture
Physical State: Viscous liquid
Color: Black
Odor: Organic solvent
Odor Threshold: No Data
Specific Gravity (water=1) 0.90
Vapor Pressure: No data
Vapor Density: Heavier than air
Material VOC: 4.30 lb/gl 516 g/l
Coating VOC: 4.31 lb/gl 516 g/l
Evaporation Rate: Faster than Butyl Acetate
Boiling Point: 156 Deg F (68.8 Deg C )
Melting Point: No data
Freezing Point: No data
Viscosity at Ambient Temperature: No data
Solubility in Water: Insoluble
Octanol/Water Partition Coefficient: No data
pH: No data
10. STABILITY AND REACTIVITY
Stability: Stable
Safety Data Sheet - Quick Dry Rubberized Undercoat Page 4 of 7
Incompatibility: Strong acids, strong bases and strong oxidizing
agents.
Hazardous Polymerization: Will not occur.
11. TOXICOLOGICAL INFORMATION
Effects of Exposure:
ACUTE:
INHALATION - Dizziness, breathing difficulty, headaches, & loss of
coordination.
EYE CONTACT - Severe irritation, tearing, redness, and blurred vision.
SKIN CONTACT - Severe irritant. Can dry and defat skin causing
cracks, irritation, and dermatitis.
INGESTION-Can cause gastrointestinal irritation, vomiting, nausea, &
diarrhea.
CHRONIC:
May affect liver, kidney and central nervous system with repeated
exposure. Prolonged or repeated exposure may cause lung injury.
Acute Toxicity Data: No data.
Carcinogenicity: NTP -No, IARC -Yes, OSHA -No
This product has not been tested for carcinogenic effects. Some
chemicals in this product may be identified by NTP, IARC and/or OSHA
as carcinogenic, indicated above as "Yes". No further information
available.
Teratology: No data.
Reproduction: Possible reproductive hazard, contains material which
may cause adverse reproductive effects based on animal data. No
further information available.
Mutagenicity: No data.
12. ECOLOGICAL INFORMATION
No data.
13. DISPOSAL CONSIDERATIONS
Subject to hazardous waste generation, treatment, storage and disposal
under RCRA, 40CFR261. Product should be disposed of in accordance
with all Federal, State and local regulations.
14. TRANSPORT INFORMATION
The following transportation information is provided based on Transtar
Autobody Technologies interpretation of shipping regulations. Each
shipper is responsible for identifying, naming, marking and labeling
prior to offering for transport.
Safety Data Sheet - Quick Dry Rubberized Undercoat Page 5 of 7
USA (DOT) Status: UN1139, Coating Solution, 3, PGII
For inner packaging not exceeding 5 L each packaged in a strong outer
box: CONSUMER COMMODITY ORM-D
Water (IMDG) Status: UN1139, Coating Solution, 3, PGII
Air (ICAO,IATA) Status: UN1139, Coating Solution, 3, PGII
Canada (TDG) Status: UN1139, Coating Solution, 3, PGII
For inner packaging not exceeding 5 L each packaged in a strong outer
box: CONSUMER COMMODITY ORM-D
15. REGULATORY INFORMATION
The information listed in this section is not all inclusive of all
regulations for this product or the chemical components of this
product.
US Federal Regulations
TSCA Status: All known major components of this product are listed on
the TSCA Inventory and/or are otherwise in compliance with TSCA.
SARA 302 (EHS) Status: No EHS chemicals present.
SARA 311/312 Status: Immediate Health Hazard, Delayed Health Hazard,
Fire Hazard.
SARA 313 Status: * Indicates toxic chemical(s) subject to the
reporting requirements of section 313 of Title III and of 40 CFR 372.
OSHA Status: This material meets the requirement of hazardous material
and is subject to 29CFR1910.1200.
USA State Information
California Proposition 65: WARNING: This product contains chemical(s)
known to the State of California to cause cancer and birth defects or
other reproductive harm.
Pennsylvania RtK Status: This material contains chemical(s) subject to
notification under Pennsylvania Right to Know.
New Jersey RtK Status: This material contains chemical(s) subject to
notification under New Jersey Right to Know.
Massachusetts RtK Status: This material contains chemical(s) subject
to notification under Massachusetts Right to Know.
Rhode Island RtK Status: This material contains chemical(s) subject to
notification under Rhode Island Right to Know.
International Regulations
Canada
DSL Status: All known major components of this product are listed on
the DSL Inventory and/or are otherwise in compliance with the DSL
NDSL Status: Contains chemicals on the NDSL
WHMIS: B2 D2A D2B
Safety Data Sheet - Quick Dry Rubberized Undercoat Page 6 of 7
New Zealand
The HSNO Approval Number for this Group Standard is HSR002662.
EINECS Status: All components of this material are listed on the EINECS Inventory.
16. OTHER INFORMATION
To the best of our knowledge, the information contained herein is
accurate, obtained from sources believed by Transtar Autobody
Technologies to be accurate. As with all chemicals, KEEP AWAY FROM
CHILDREN AND ANIMALS. FOR PROFESSIONAL USE ONLY. The hazard
information contained herein is offered solely for the consideration
of the user, subject to his own investigation and verification of
compliance with applicable regulations, including the safe use of the
product under every foreseeable condition.
________________________________________________________________________________
Converted to New Zealand Standard by Sam Gunaratna B Sc, Post-Grad Dip in Science (University of Auckland)
Ph: 02102776004; email: olu@ihug.co.nz September 2008
Safety Data Sheet - Quick Dry Rubberized Undercoat Page 7 of 7
|