MATERIAL SAFETY DATA SHEET
.
1. Product and Company Identification
space
Product name A08200
space
MSDS name PRIMER - N32 L
space
CAS # Mixture
space
Generic description Solvent Based Adhesive
space
Manufacturer Bostik, Inc.
211 Boston Street
Middleton, MA 01949 USA
space
24 hour emergency Telephone: 1-800-227-0332
assistance
space
General assistance Telephone: 1-978-777-0100
space
MSDS assistance Telephone: 1-414-607-1347
.
2. Hazards Identification
space
Emergency overview Liquid and vapors are flammable. Contact may cause skin and eye irritation. Mist may cause
nose and throat irritation. Ingestion will cause nausea, vomiting, pain, upset stomach, and
diarrhea.
space
Potential health effects
Eyes Liquid or vapors may irritate the eyes. Prolonged or repeated contact may worsen irritation.
Symptoms may include stinging, tearing, redness, swelling, and blurred vision. May lead to
permanent damage if not treated promptly.
space
Skin This product may cause irritation to the skin. Prolonged or repeated contact with this product
may dry and/or defat the skin. This product may be harmful if it is absorbed through the skin.
space
Inhalation This product may cause irritation to the respiratory system. Excessive inhalation of this material
causes headache, dizziness, nausea and incoordination.
space
Ingestion This product is harmful if swallowed. Ingestion can cause gastrointestinal irritation, nausea,
vomiting and diarrhea.
space
Target organs Lungs, skin and eyes.
space
Signs and symptoms Signs and symptoms of overexposure to this product include headache, irritation of upper
respiratory tract, asthmatic symptoms, chest tightness, breathing difficulty, coughing, eye
irritation, skin irritation, diarrhea.
.
3. Composition / Information on Ingredients
space
Components CAS # Percent
Toluene 108-88-3 40 - 70
Propylene Glycol Monomethyl Ether 107-98-2 15 - 40
2-Butoxyethanol 111-76-2 3-7
Ethyl Alcohol 64-17-5 1-5
.
4. First Aid Measures
space
First aid procedures
Eye contact In case of contact, immediately flush eyes with large amounts of water, continuing to flush for
15 minutes. Get medical attention or advice.
space
Skin contact For skin contact flush with large amounts of water. If irritation persists, repeat flushing and get
medical attention. Discard any shoes or clothing items that cannot be decontaminated.
space
Inhalation Move person to non-contaminated air. Call a physician if symptoms develop or persist.
space
Ingestion If the material is swallowed, get immediate medical attention or advice. If vomiting occurs
naturally, have victim lean forward to reduce risk of aspiration. Never give anything by mouth
to a victim who is unconscious or is having convulsions.
Material name: A08200 MSDS US
1/5
41205 Version #: 01 Revision date: 10-21-2008 Print date: 10-21-2008
space
Notes to physician This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected
person appropriately. If overexposure to the solvents in this product is suspected, testing
should include nervous system and brain effects including recent memory, mood,
concentration, headaches and altered sleep patterns. Liver and kidney function should be
evaluated.
.
5. Fire Fighting Measures
space
Extinguishing media
Suitable extinguishing Use dry chemical, carbon dioxide, or foam. Use water spray on large fires. Use water to cool
media fire-exposed containers and to protect personnel. Do not direct a solid stream of water or foam
into hot, burning pools; this may result in frothing and increase fire intensity.
space
Basic fire fighting procedures Empty containers may retain product residue including Flammable or Explosive vapors. Do not
cut, drill, grind, or weld near full, partially full, or empty product containers.
space
Fire fighting Wear full protective clothing, including helmet, self-contained positive pressure or pressure
equipment/instructions demand breathing apparatus, protective clothing and face mask.
space
Sensitivity to static discharge Sparks generated by static discharge may ignite this product or its vapors. All containers and
equipment must be bonded or grounded to minimize risk.
space
Unusual fire & explosion During a fire, irritating and highly toxic gases may be generated during combustion or
hazards decomposition. Vapors may be heavier than air and may travel long distances along the
ground before igniting back to vapor source. High temperatures can cause sealed containers to
rupture due to a buildup of internal pressures. Cool with water.
space
Flash point 56 癋 (13.3 癈)
.
6. Accidental Release Measures
space
Emergency action WARNING, Flammable. Eliminate all sources of ignition. Evacuate the area promptly and keep
upwind of the spilled material. Isolate the spill area to prevent people from entering. Wear
appropriate protective equipment and clothing during clean-up.
space
Containment procedures Stop discharge if safe to do so. Stop material from contaminating soil or from entering sewers
or water streams. Cover spills with non-flammable absorbent and place in closed chemical
waste containers.
space
Reporting See Federal reporting requirements listed in Section 15. We recommend you contact local
authorities to determine if there may be other local reporting requirements.
.
7. Handling and Storage
space
Handling Keep this product from heat, sparks, or open flame. Avoid getting this material into contact
with your skin and eyes. Wash hands thoroughly after handling, especially before eating,
drinking, smoking, and using restroom facilities. Wash contaminated goggles, face shields, and
gloves. Professionally launder contaminated clothing before re-use. Avoid breathing vapors or
mists of this product. Use this product with adequate ventilation. Do not reuse the empty
container.
space
Storage Keep the container tightly closed and in a cool, well-ventilated place. Do not handle or store
near an open flame, heat or other sources of ignition. All containers must be bonded or
grounded to minimize risk.
space
Empty container precaution Attention! Follow label warnings even after container is emptied since empty containers may
retain product residues. Do not reuse empty container without professional cleaning for food,
clothing, or products for human or animal consumption, or where skin contact can occur. Do
not heat or cut empty container with electric or gas torch.
.
8. Exposure Controls / Personal Protection
space
Engineering controls Provide local and general exhaust ventilation to effectively remove and prevent buildup of any
vapors or mists generated from the handling of this product. Explosion proof exhaust
ventilation should be used. Additional area ventilation or local exhaust may be required to
maintain air concentrations below recommended exposure limits.
space
Personal protective equipment
Eye protection Wear safety glasses; chemical goggles (if splashing is possible). Contact lenses should not be
worn.
space
Skin and body protection Impervious gloves should be used at all times when handling this product. Recommended
gloves include rubber, neoprene, nitrile or viton. Use of protective coveralls and long sleeves is
recommended.
Material name: A08200 MSDS US
2/5
41205 Version #: 01 Revision date: 10-21-2008 Print date: 10-21-2008
space
Respiratory protection Avoid breathing vapor and/or mists. If airborne concentrations are above the applicable
exposure limits, use NIOSH approved respiratory protection. High airborne concentrations may
necessitate the use of self-contained breathing apparatus (SCBA) or a supplied air respirator.
space
General Eyewash fountains and emergency showers should be readily available. Use good industrial
hygiene practices in handling this material.
space
Additional exposure data
US ACGIH Threshold Limit Values: Time Weighted Average (TWA): mg/m3 & ppm
Propylene Glycol Monomethyl 107-98-2 1-METHOXY-2-PROPANOL (PGME) 100 PPM
Ether
Toluene 108-88-3 TOLUENE 20 PPM
2-Butoxyethanol 111-76-2 2-BUTOXYETHANOL (EGBE) 20 PPM
Ethyl Alcohol 64-17-5 ETHANOL 1000 PPM
US OSHA Table Z-1-A: Time Weighted Average (TWA): mg/m3 & ppm
Propylene Glycol Monomethyl 107-98-2 PROPYLENE GLYCOL MONOMETHYL ETHER 360 MGM3 - 100 PPM
Ether
Toluene 108-88-3 TOLUENE 375 MGM3 - 100 PPM
2-Butoxyethanol 111-76-2 2-BUTOXYETHANOL 120 MGM3 - 25 PPM
Ethyl Alcohol 64-17-5 ETHYL ALCOHOL 1900 MGM3 - 1000 PPM
.
9. Physical & Chemical Properties
space
Target solids 7.4
space
pH N/A
space
Density 0.89 g/cc
space
Odor Solvent
space
Color Clear
space
Physical state Liquid
space
Freeze protect No
.
10. Chemical Stability & Reactivity Information
space
Hazardous If product is burned carbon monoxide, carbon dioxide, acetic acid, vinyl acetate, and other
reactions/decomposition unknown products may be produced. Additionally, depending on conditions, some aliphatic
products aldehydes and carboxylic acids may be formed.
space
Hazardous polymerization Will not occur.
space
Conditions to avoid Extremes of temperature and direct sunlight. Keep away from sources of ignition.
space
Stability Stable under normal conditions. This product may react with strong acids, bases and oxidizing
agents.
.
11. Toxicological Information
space
Chronic effects Chronic exposure to solvents can cause reproductive problems, reduced fertility, dryness and
cracking of skin, headaches, loss of appetite and nausea.
.
12. Ecological Information
space
Ecotoxicological information Organic solvents produce slight to moderate toxicity to aquatic life. Insufficient data exists to
evaluate the effect on plants, birds or land animals.
.
13. Disposal Considerations
space
It is the obligation of each user of the product mentioned herein to determine and comply with the requirements of all applicable
local, state and federal regulations.
space
Waste disposal Dispose of waste material according to Local, State, Federal, and Provincial Environmental
Regulations. Wastes must be tested using methods described in 40 CFR Part 261 to determine
if it meets applicable definitions of hazardous wastes. Empty containers must be handled with
care due to product residue. Do not heat or cut empty container with electric or gas torch.
Material name: A08200 MSDS US
3/5
41205 Version #: 01 Revision date: 10-21-2008 Print date: 10-21-2008
.
14. Transport Information
space
DOT
Basic shipping requirements:
Proper shipping name Adhesives
Hazard class 3
UN number UN1133
Packing group II
space
IATA
Basic shipping requirements:
Proper shipping name Adhesives
Hazard class 3
UN number UN1133
Packing group II
space
IMDG
Basic shipping requirements:
Proper shipping name Adhesives
Hazard class 3
UN number UN1133
Packing group II
.
15. Regulatory Information
space
This MSDS is prepared and distributed pursuant to the Federal Hazard Communication Standard, 29 CFR 1910.1200.
space
Federal regulations All components are on the U.S. EPA TSCA Inventory List.
US CWA Section 311 Reporting Quantities of Hazardous Substances: Reportable quantity
Toluene 108-88-3 TOLUENE 1000 LBS
space
State regulations If this product contains any ingredients listed under California Proposition 65, they will be
noted below:
US - California Proposition 65 - CRT: Listed date/Developmental toxin
Toluene 108-88-3 Listed: January 1, 1991 Developmental toxin.
space
International regulations This product has been classified in accordance with the hazard criteria of the Controlled
Products Regulations and contains all the information required by the Controlled Products
Regulations.
space
HMIS Ratings Health: 2*
Flammability: 3
Physical hazard: 0
Personal protection: X
space
SARA 311/312 HAZARD Immediate Hazard - Yes
CATEGORIES Delayed Hazard - Yes
Fire Hazard - Yes
Pressure Hazard - No
Reactivity Hazard - No
Material name: A08200 MSDS US
4/5
41205 Version #: 01 Revision date: 10-21-2008 Print date: 10-21-2008
space
WHMIS status Controlled
space
WHMIS labeling
space
WHMIS classification B2 - Flammable/Combustible
D2A - Other Toxic Effects-VERY TOXIC
D2B - Other Toxic Effects-TOXIC
.
16. Other Information
space
Disclaimer The data in this MSDS has been compiled from publicly available sources. This data relates
only to the designated product and not to the use of said product in combination with other
materials. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only
hazards which exist. Responsibility for proper precautions and safe use of the product lies with
the user. All data in this MSDS is typical of the product as a whole, and does not represent any
individual lot or batch, therefore, Bostik, Inc. makes no warranty about the accuracy of the
data herein and assumes no liability for the use of such data. It is the responsibility of the user
to comply with all applicable federal, state, and local laws and regulations.
space
Further information Any characters following " A08200 " are just designations for the various types of packaging
that are available for this product. These characters do not indicate a different product nor a
different regulatory, health, safety and/or environmental status. This document covers the
A08200 for all of its packaging types.
space
Issue date 10/21/2008
space
Prepared by Pam Larsen
Material name: A08200 MSDS US
5/5
41205 Version #: 01 Revision date: 10-21-2008 Print date: 10-21-2008
|