MATERIAL SAFETY DATA SHEET
MSDS NO.16 DATE: 8-31-09
PRO-SPRAY INTERMIX CLEARCOATS & ACTIVATORS
SECTION 1 - MANUFACTURER
Manufacturer: PRO-SPRAY FOR CHEMICAL EMERGENCY
An Alco Industries Company CHEMTREC: 1-800-424-9300
600 Nova Drive SE CANUTEC: 1-613-996-6666
Massillon, Ohio 44646 (For Canada Call Collect)
Phone: 330-830-6000
Fax: 330-830-6005
Product: Refinish DOT Shipping Name: Paint UN1263
Hazardous Materials Information: See Section 10 OSHA Hazard Class: Flammable Liquid
SECTION 2 ?HAZARDOUS INGREDIENTS (see section 10)
EMERG.
HAZARDOUS INGREDIENT N CAS NO ACGIH OSHAA STEL* HMIS* FLASH VAPOR
PLAN* O TLV PEL * H-F-R POINT PRESSURE
T ppm ppm ppm T.C.C./F mm/Hg.
E
1,6-HEXAMETHYLENE DISOCYANTE NO 822-06-0 TWA = 0.02
0.005 3-0-0 N/E N/E
2-BUTOXYETHYL ACETATE NO 112-07-2 N/E N/E N/E 2-2-0 160 0.2 @ 68F
ACETONE YES 67-64-1 750 750 1000 1-3-0 <-1.0 182 @68F
AROMATIC HYDROCARBONS NO 64742-95-6 50 50 150 1-3-0 110 4 @ 68F
ETHYL BENZENE NO 3 100-41-4 100 100 150 2-3-0 77 7.10 @68F
HOMOPOLYMER OF 1 28182-81-2
HEXAMETHYLENE DIISOCYANATE
HYDROXY ACRYLIC RESIN D NO N/A N/E N/E N/E N/A N/A N/A
HYDROXY ACRYLIC RESIN E NO N/A N/E N/E N/E N/A N/A N/A
HYDROXY ACRYLIC RESIN F NO N/A N/E N/E N/E N/A N/A N/A
HYDROXY ACRYLIC RESIN G NO N/A N/E N/E N/E N/A N/A N/A
HYDROXY ACRYLIC RESIN H NO N/A N/E N/E N/E N/A N/A N/A
HYDROXY ACRYLIC RESIN I NO N/A N/E N/E N/E N/A N/A N/A
HYDROXY ACRYLIC RESIN J NO N/A N/E N/E N/E N/A N/A N/A
ISOPHORONE DIISOCYANATE NO 2 53880-05-0 N/E N/E 2-1-0 N/E N/E
HOMOPOLYMER
ISOPHORONE DIISOCYANATE 4098-71-9
METHYL AMYL KETONE NO 110-43-0 50 100 N/E 1-2-0 102 2.1 @68F
METHYL ISOBUTYL KETONE YES 108-10-1 50 50 75 2-3-0 60 16 @68F
N-BUTYL ACETATE YES 123-86-4 150 150 200 2-3-0 81 10 @ 68F
PARACHLOROBENZOTRIFLUORIDE NO 98-56-6 N/E N/E N/E 1-2-1 109 5.3 @ 68F
(PCBTF)
PESEUDOCUMENE (1,2,4- 95-63-6
25 PPM N/E N/E 1,2,0 112 1 @ 56癋
TRIMETHYLBENZENE)
POLYESTER RESIN D NO N/A N/E N/E N/E N/A N/A N/A
POLYESTER RESIN E NO N/A N/E N/E N/E N/A N/A N/A
PROPIONIC ACID NO 590-01-2 N/E N/E 2-2-0 100 3.4 @68F
PROPYLENE GLYCOL MONO- NO 108-65-6 N/E N/E N/E 2-3-0 114 Seta 2.4 @68F
METHYL ETHER ACETATE Closed
PROPYLENE GLYCOL MONOMETHYL NO 108-65-6 N/E N/E N/E 2-3-0 114 SETA 2.4 @ 68F
ETHER ACETATE CLOSED
SOLVENT NAPHTHA (PETROLEUM), NO 64742-95-6 100 100 N/E 2-3-0 110 4@68F
LIGHT AROMATIC
XYLENE YES 3 1330-20-7 100 100 150 2-3-0 80 9.5 @68F
* Subject to the reporting requirements of section 313 of the Emergency Planning and Community Right to Know Act of 1986 and 40CFR372.
** Short Term Exposure Limit
Note 1 - Free Hexamethylene Diisocyanate monomer (HDI) is less than 0.3% by weight of total HDI
Note 2 - Free Isophrone Diisocyanate monomer (IPDI) is less than 0.7% by weight of total IPDI
Note 3 - Xylene contains 18-20% Ethyl Benzene (cas#100-41-4) having PEL of 100 ppm, TLV of 100 ppm & STEL of 125 ppm.
N/E - Not establisihed as reported by manufacturer.
SECTION 3 ?PHYSICAL DATA
Evaporation rate: Less than ether Vapor density: Heavier than air
Solubility in water: Miscible Percent volatile by volume: 19.4% - 80.9%
Boiling range: 129F-473F/54 C - 245C
Percentage volatile by weight: 15.3 ?76.0%
Gallon weight: 6.61 ?14.10 lb/gallon V.O.C: 1.9 - 7.5 lb/gallon
SECTION 4 ?FIRE & EXPLOSION DATA
Flash point (closed cup): -4 to 160OF.
Flammable limits: 0.8% - 14%
MSDS 16 Page 1
Extinguishing media: foam, carbon dioxide, and dry chemical.
Special fire fighting procedures: Full protective equipment, including self-contained breathing apparatus is recommended. Water from fog nozzles may be
used to cool closed containers to prevent pressure build up.
Unusual fire & explosion hazards: When heated above the flash point, emits flammable vapors which, when mixed with air, can burn or be explosive. Fine
mists or sprays may be flammable at temperatures below the flash point.
SECTION 5 ?HEALTH HAZARD DATA
General Effects:
Ingestion: Gastrointestinal distress. In the unlikely event of ingestion, call a doctor immediately and have the names of the ingredients available. Do not.
Induce vomiting.
Inhalation: May cause nose and throat irritation. Repeated and prolonged overexposure to solvents may lead to permanent brain and nervous system
damage. Eye watering, headaches, nausea, dizziness and loss of coordination are signs that solvent levels are too high. Exposure to isocyanates may cause
respiratory sensitization. This effect may be permanent. Symptoms include and asthma-like reaction with shortness of breath, wheezing or coughing which may
be permanent. This effect may be delayed for several hours after exposure. Repeated overexposure to isocyanates may cause a decrease in lung function,
which may be permanent. Individuals with lung or breathing problems or prior reaction to isocyanates must not be exposed to the vapors or spray mist of this
product. If affected by inhalation of vapor or spray mist, remove to fresh air. If breathing difficulty persists, or occurs later, consult a physician.
Skin or eye contact: May cause irritation or burning of the eyes. Repeated or prolongs liquid contact may cause skin irritation with discomfort and dermatitis.
In case of eye contact, immediately flush with plenty of water for at least 15 minutes; call a physician. In case of skin contact, wash with soap and water. If
irritation occurs, contact a doctor.
Special Effects:
Aromatic hydrocarbon A, B; ?laboratory studies with rats have shown that petroleum distillates cause kidney damage and kidney or liver tumors. These
effects were not seen in similar studies with guinea pigs, dogs or monkeys. Several studies evaluating petroleum workers have not shown a significant increase
of kidney damage or an increase in kidney or liver tumors.
Butyl acetate ?may cause abnormal liver function. Tests for embryotoxic activity in animals has been conclusive. Has been toxic to the fetus in laboratory
animals at doses that are toxic to the mother.
Xylene ?High concentrations have caused embryotoxic effects in laboratory animals. Recurrent overexposure may result in liver and kidney injury. Can be
absorbed through the skin in harmful amounts
Aliphatic Polyisocyanate or Isophorone Diisocyanate homopolymer or Polyisocyanate: Repeated exposure may cause allergic skin rash, itching,
swelling. Repeated overexposure to isocyanantes may cause lung injury, including a decrease in lung function, which may be permanent. Over exposure may
cause asthma-like reactions with shortness of breath, wheezing, cough which may be permanent or permanent lung sensitization? This effect may be delayed
for several hours after exposure. Individuals with pre-existing lung disease, asthma or breathing difficulties may have increased susceptibility to the toxicity of
excessive exposures.
1,6 Hexamethylene Diisocyanate: May cause temporary upper respiratory and/or lung irritation with cough, difficult breathing, or shortness of breath. Over
exposure may cause asthma-like reactions with shortness of breath, wheezing, cough or permanent lung sensitization. This effect may be delayed for several
hours after exposure. Prolonged skin contact may cause chemical burns. Liquid splashes in the eye may result in chemical burns. Individuals with pre-existing
lung disease, asthma or breathing difficulties may have increased susceptibility to the toxicity of excessive exposures.
Ethylene Glycol Monobutyl Ether Acetate: Can be absorbed through the skin in harmful amounts. May destroy red blood cells. May cause abnormal kidney
function.
SECTION 6 ?REACTIVITY DATA
Stability: Stable
Incompatibility (materials to avoid): None reasonably foreseeable
Hazardous decomposition products: CO, CO2, smoke
Hazardous polymerization: Will not occur
SECTION 7 - SPILL or LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Provide maximum ventilation. Only personnel equipped with proper respiratory,
skin, and eye protection should be permitted in the area. Remove all sources of ignition. Take up spilled material with sand, vermiculite, or other non-
combustible absorbent material and place in clean, empty containers for disposal. Only the spilled material and the absorbant should be placed in this container.
WASTE DISPOSAL METHOD: Waste material must be disposed of in accordance with federal, state, provincial, and local environmental control regulations.
Empty containers should be recycled or disposed of through an approved waste management facility.
SECTION 8 ?SPECIAL PRECAUTIONS
Respiratory: DO NOT breathe vapors or mists. Wear a positive pressure supplied air respirator (NIOSH/MSHA TC-19C) while mixing activator with any paint or
clear enamel, during application and until all vapors and spray mists are exhausted. Individuals with a history or lung or breathing problems or prior reaction to
isocyanate should not use or be exposed to this product. DO NOT permit anyone without protection in the painting area. Follow the respirator manufacturer's
directions for respirator use.
Ventilation: Provide sufficient ventilation in volume and pattern to keep contaminants below applicable OSHA requirements.
Protective clothing: Neoprene gloves and coveralls are recommended.
Eye protection: Desirable in all industrial situations. Include splashguards or side shields.
Precautions to be taken in handling and storing: Observe label precautions. Keep away from heat, sparks and flame. Close container after use. Ground
containers when pouring. Wash thoroughly after handling and before eating or smoking. Do not store above 120F.
Other precautions: Do not sand, flame cut, braze or weld dry coating without a NIOSH/MSHA approved respirator or appropriate ventilation.
SECTION 10 ?OTHER INFORMATION
Section 313 Supplier Notification: The chemicals listed below with percentages are subject to the reporting requirements of Section 313 of the Emergency
Planning and Right-To-Know Act of 1986 and of 40 CFR 372.
Product Code: PRO-SPRAY A-512-2, A-512-18 2.1 VOC Primer Activator
Homopolymer of Hexamethylene Diisocyanate (40-50%), 1,6-Hexamethylene Diisocyanate (<0.1%), Parachlorobenzotrifluoride (50-60%)
Gallon Weight: 10.46 Solvent Density: Heavier than air
% Solids by Weight: 45.00 H: 2 F: 2 R: 1
% Solids by Volume: N/E Flash Point: 109癋
V.O.C lb Gal: 5.753 OSHA Storage: 2
V.O.C grams: 689
V.O.C lb gal less Water & Exempt: 0.20
V.O.C grams pl less Water & Exempt: 24
MSDS 16 Page 2
Product Code: PRO-SPRAY A-541-2 2.1 VOC Activator Slow
Homopolymer of Hexamethylene Diisocyanate (40-50%), 2-Butoxyethyl Acetate (5-10%), Methyl Amyl Ketone (1-5%), Parachlorobenzotrifluoride (PCBTF)
(40-50%)
Gallon Weight: 10.13 Solvent Density: Heavier than air
% Solids by Weight: 50.00 H: 2 F: 2 R: 1
% Solids by Volume: N/av Flash Point: 102癋
V.O.C. AP lb Gal: 0.61 OSHA Storage: 2
V.O.C. AP g/l: 73
V.O.C LE lb gal less Water & Exempt: 1.01
V.O.C LE g/l less Water & Exempt: 121
Product Code: PRO-SPRAY A-542-2 2.1 VOC Activator Medium
Homopolymer of Hexamethylene Diisocyanate (40-50%), n-Butyl Acetate (1-5%), Parachlorobenzotrifluoride (PCBTF) (40-50%)
Gallon Weight: 10.39 Solvent Density: Heavier than air
% Solids by Weight: 50.00 H: 2 F: 3 R: 1
% Solids by Volume: N/av Flash Point: 78癋
V.O.C. AP lb Gal: 0.21 OSHA Storage: 1C
V.O.C. AP g/l: 25
V.O.C LE lb gal less Water & Exempt: 0.86
V.O.C LE g/l less Water & Exempt: 103
Product Code: PRO-SPRAY A-543-2 2.1 VOC Activator Fast
Homopolymer of Hexamethylene Diisocyanate (40-50%), Homopolymer of Isophone Diisocyanate (5-10%), Solvent Naphtha (petroleum) light aroma (1-5%),
n-Butyl Acetate (1-5%), Parachlorobenzotrifluoride (PCBTF) (40-50%)
Gallon Weight: 10.07 Solvent Density: Heavier than air
% Solids by Weight: 50.60 H: 2 F: 3 R: 1
% Solids by Volume: N/av Flash Point: 78癋
V.O.C. AP lb Gal: 0.54 OSHA Storage: 1C
V.O.C. AP g/l: 65
V.O.C LE lb gal less Water & Exempt: 1.68
V.O.C LE g/l less Water & Exempt: 202
Product Code: PRO-SPRAY ICA-799 Extra Slow Activator
T Homopolymer of Hexamethylene Diisocyanate (40-50%), Solvent naphtha (petroleum) light aromatic (30-40%), 2-butoxyethyl acetate(15-25%), 1,6-
Hexamethylene diisocyanate (.1-1%).
Gallon Weight: 8.31 lb Solvent Density: Heavier than air
% Solids by Weight: 44.5 H: 3 F: 3 R: 1
% Solids by Volume: 39.1 Flash Point: 70癋
V.O.C AP lb Gal: 4.61 OSHA Storage: 1C
V.O.C AP grams: 552.8
V.O.C LE lb gal less Water & Exempt: 4.61
V.O.C LE grams pl less Water & Exempt: 552.8
Product Code: PRO-SPRAY ICA-800 Slow/Low bake Activator
Homopolymer of Hexamethylene Diisocyanate (40-50%), Solvent naphtha (petroleum) light aromatic(15-25%), n瑽utyl Acetate(1-5%), 2-butoxyethyl
acetate(15-25%), 1,6-Hexamethylene diisocyanate (.1-1%), xylene(10-20%), ethyl benzene(1-5%).
Gallon Weight: 8.26 lb Solvent Density: Heavier than air
% Solids by Weight: 43.5 H: 3 F: 3 R: 1
% Solids by Volume: 38.0 Flash Point: 70癋
V.O.C AP lb Gal: 4.67 OSHA Storage: 1C
V.O.C AP grams: 559.4
V.O.C LE lb gal less Water & Exempt: 4.67
V.O.C LE grams pl less Water & Exempt: 559.4
Product Code: PRO-SPRAY ICA-801 Normal Activator
Homopolymer of Hexamethylene Diisocyanate (40-50%), Solvent naphtha (petroleum) light aromatic (15-25%), n瑽utyl Acetate (15-25%), 2-butoxyethyl
acetate (5-15%), 1,6-Hexamethylene diisocyanate (.1-1%), xylene (1-5%), ethyl benzene (.1-1%).
Gallon Weight: 8.25 lb Solvent Density: Heavier than air
% Solids by Weight: 43.5 H: 3 F: 3 R: 1
% Solids by Volume: 37.9 Flash Point: 70癋
V.O.C AP lb Gal: 4.66 OSHA Storage: 1C
V.O.C AP grams: 558.2
V.O.C LE lb gal less Water & Exempt: 4.66
V.O.C LE grams pl less Water & Exempt: 558.2
Product Code: PRO-SPRAY ICA-802 Express Activator
Homopolymer of Hexamethylene Diisocyanate (40-50%), Solvent naphtha (petroleum) light aromatic(1-5%), n瑽utyl Acetate(15-25%), Isophrone Diisocyanate
homopolymer (5-10%), Xylene(20-30%), Ethyl Benzene (5-10%), 1,6-Hexamethylene diisocyanate (.1-1%), Isophorone diisocyanate (.1-1%).
Gallon Weight: 8.18 lb Solvent Density: Heavier than air
% Solids by Weight: 42.8 H: 3 F: 3 R: 1
% Solids by Volume: 36.7 Flash Point: 70癋
V.O.C AP lb Gal: 4.68 OSHA Storage: 1C
V.O.C AP grams: 560.6
V.O.C LE l b gal less Water & Exempt: 4.68
V.O.C LE grams pl less Water & Exempt: 560.6
Product Code: PRO-SPRAY ICA-803 MS Rapid Activator
Homopolymer of Hexamethylene Diisocyanate 20-30%), Isophorone diisocyanate homopolymer (10-20%), Solvent naphtha (petroleum) light aromatic(1-5%),
n瑽utyl Acetate(20-30%), methyl isobutyl ketone(20-30%), Trimethylbenzene(1-5%), 1,6-Hexamethylene diisocyanate (.1-1%), Isophorone diisocyanate (.1-
1%)
Gallon Weight: 8.05 Solvent Density: Heavier than air
MSDS 16 Page 3
% Solids by Weight: 42.85 H: 3 F: 3 R: 1
% Solids by Volume: N/E Flash Point: 57癋
V.O.C lb Gal: 4.60 OSHA Storage: 1B
V.O.C grams: 551
V.O.C lb gal less Water & Exempt: 4.60
V.O.C grams pl less Water & Exempt: 551
Product Code: PRO-SPRAY PCA-350 3-1 HS Hardener Medium
Homopolymer of Hexamethylene Diisocyanate (70-80%), Solvent naphtha (petroleum) light aromatic, n瑽utyl Acetate, Methyl amyl Ketone, Xylene (1-5%),
pseudocumene, 1,6-Hexamethylene diisocyanate (.1-1%).
Gallon Weight: 8.69 lb Solvent Density: Heavier than air
% Solids by Weight: 69.0 H: 3 F: 3 R: 1
% Solids by Volume: 61.9 Flash Point: 88癋
V.O.C AP lb Gal: 2.69 OSHA Storage: 1C
V.O.C AP grams: 322.7
V.O.C LE lb gal less Water & Exempt: 2.69
V.O.C LE grams pl less Water & Exempt: 322.7
Product Code: PRO-SPRAY PCA-351 3-1 HS Hardener Fast
Homopolymer of Hexamethylene Diisocyanate (70-80%), Solvent naphtha (petroleum) light aromatic, n瑽utyl Acetate, Methyl amyl Ketone, Xylene (1-5%),
pseudocumene, 1,6-Hexamethylene diisocyanate (.1-1%).
Gallon Weight: 8.75 lb Solvent Density: Heavier than air
% Solids by Weight: 69.0 H: 3 F: 3 R: 1
% Solids by Volume: 62.4 Flash Point: 88癋
V.O.C AP lb Gal: 2.71 OSHA Storage: 1C
V.O.C AP grams: 324.9
V.O.C LE lb gal less Water & Exempt: 2.71
V.O.C LE grams pl less Water & Exempt: 324.9
Product Code: PRO-SPRAY PCA-352 3-1 HS Hardener Express
Homopolymer of Hexamethylene Diisocyanate (70-80%), Isophorone Diisocyanate homopolymer (5-10%), Solvent naphtha (petroleum) light aromatic, n瑽utyl
Acetate, Methyl amyl Ketone, Xylene (1-5%), pseudocumene, 1,6-Hexamethylene diisocyanate (.1-1%), Isophorone Diisocyancate (<0.1%).
Gallon Weight: 8.80 lb Solvent Density: Heavier than air
% Solids by Weight: 68.1 H: 3 F: 3 R: 1
% Solids by Volume: 61.8 Flash Point: 88癋
V.O.C AP lb Gal: 2.81 OSHA Storage: 1C
V.O.C AP grams: 336.5
V.O.C LE lb gal less Water & Exempt: 2.81
V.O.C LE grams pl less Water & Exempt: 336.5
Product Code: PRO-SPRAY PCA-353-2, 353-25 3-1 HS Hardener Express Plus
Homopolymer of Hexamethylene Diisocyanate (70-80%), Isophorone Diisocyanate homopolymer (5-10%), Solvent naphtha (petroleum) light aromatic, n瑽utyl
Acetate, Methyl amyl Ketone, Xylene (1-5%), pseudocumene, 1,6-Hexamethylene diisocyanate (.1-1%), Isophorone Diisocyancate (<0.1%).
Gallon Weight: 8.80 lb Solvent Density: Heavier than air
% Solids by Weight: 68.1 H: 3 F: 3 R: 1
% Solids by Volume: 61.8 Flash Point: 88癋
V.O.C AP lb Gal: 2.81 OSHA Storage: 1C
V.O.C AP grams: 336.5
V.O.C LE lb gal less Water & Exempt: 2.81
V.O.C LE grams pl less Water & Exempt: 336.5
Product Code: PRO-SPRAY PCA-951 2.1 Fast Clearcoat Activator
Homopolymer of Hexamethylene Diisocyanate (20-30%), Isophorone Diisocyanate homopolymer (5-10%), Aromatic Hydrocarbons (1-5%), n-butyl Acetate (5-
10%), Parachlorobenzotrifluoride (PBCTF) (50-60%), 1,6-Hexamethylene Diisocynate (<0.1%), Isophorone Diisocyancate (<0.1%).
Gallon Weight: 10.06 lb Solvent Density: Heavier than air
% Solids by Weight: 37.16 H: 2 F: 3 R: 0
% Solids by Volume: n/av Flash Point: 78癋
V.O.C AP lb Gal: 1.02 OSHA Storage: 1C
V.O.C AP grams: 122
V.O.C LE lb gal less Water & Exempt: 1.93
V.O.C LE grams pl less Water & Exempt: 231
Product Code: PRO-SPRAY PCA-952 Slow Clear Activator
Homopolymer of Hexamethylene Diisocyanate (30-40%), 2-Butoxyethyl Acetate (1-5%), Parachlorobenzotrifluoride (PBCTF) (50-60%), Xylene (5-10%), 1,6-
Hexamethylene Diisocynate (<0.1%).
Gallon Weight: 10.07 lb Solvent Density: Heavier than air
% Solids by Weight: 37.5 H: 2 F: 3 R: 0
% Solids by Volume: n/av Flash Point: 79癋
V.O.C AP lb Gal: 1.01 OSHA Storage: 1C
V.O.C AP grams: 121
V.O.C LE lb gal less Water & Exempt: 1.89
V.O.C LE grams pl less Water & Exempt: 226
MSDS 16 Page 4
Product Code: PRO-SPRAY PCA-953 2.1 Fast Clearcoat Activator
Homopolymer of Hexamethylene Diisocyanate (30-40%), 2-Butoxyethyl Acetate (5-10%), Methyl Amyl Ketone (1-5%), Parachlorobenzotrifluoride (PBCTF) (50-
60%), 1,6-Hexamethylene Diisocynate (<0.1%).
Gallon Weight: 10.08 lb Solvent Density: Heavier than air
% Solids by Weight: 40 H: 2 F: 2 R: 0
% Solids by Volume: n/av Flash Point: 102癋
V.O.C AP lb Gal: 1.01 OSHA Storage: 2
V.O.C AP grams: 121
V.O.C LE lb gal less Water & Exempt: 1.83
V.O.C LE grams pl less Water & Exempt: 219
Product Code: PRO-SPRAY PSC-4000-2, PSC-4000-5 3:1 RAPID CLEAR
Hydroxy Acrylic Resin I, Acetone (40-50%). Parachlorobenzotrifluoride (PCBTF) (20-30%). 2-butoxyethyl acetate (1-5%), Methyl Amyl Ketone (1-5%), Propionic
Acid (10-20%).
Gallon Weight: 7.59 lb Solvent Density: Heavier than air
% Solids by Weight: 37.11 H: 2 F: 3 R: 0
% Solids by Volume: n/av Flash Point: 0癋
V.O.C AP lbs/Gall: 1.74 OSHA Storage: 1B
V.O.C AP g/l 208
V.O.C LE lb gal less Water & Exempt: 3.23
V.O.C LE grams pl less Water & Exempt: 387
Product Code: PRO-SPRAY PSC-7000-2, PSC-7000-5 HI-TEMP GLAMOUR CLEARCOAT
Hydroxy Acrylic Resin F, Solvent naphtha (petroleum) light aromatic, n-Butyl Acetate, Propylene Glycol Monomethyl Ether Acetate, 2-butoxyethyl acetate, Xylene
(1-5%), Acetone (13%).
Gallon Weight: 7.97 lb Solvent Density: Heavier than air
% Solids by Weight: 44.64 H: 2 F: 3 R: 0
% Solids by Volume: 39.0 Flash Point: 0癋
V.O.C AP lbs/Gall: 3.39 OSHA Storage: 1B
V.O.C AP g/l 406.4
V.O.C LE lb gal less Water & Exempt: 4.01
V.O.C LE grams pl less Water & Exempt: 480.9
Product Code: PRO-SPRAY PSC-8000-2, PSC-8000-5 H.S CLEARCOAT
Hydroxy Acrylic Resin E, Polyester Resin D, Solvent naphtha (petroleum) light aromatic (1-5%), n-Butyl Acetate (30-40%), 2-butoxyethyl acetate (1-5%),
Xylene (1-5%), Acetone (8.2%).
Gallon Weight: 8.23 lb Solvent Density: Heavier than air
% Solids by Weight: 52.11 H: 2 F: 3 R: 0
% Solids by Volume: 44.2 Flash Point: 0癋
V.O.C AP lb Gal: 3.28 OSHA Storage: 1B
V.O.C AP grams pl: 393.6
V.O.C LE lb gal less Water & Exempt: 3.63
V.O.C LE grams pl less Water & Exempt: 434.9
Product Code: PRO-SPRAY PSC-9000-2, PSC-9000-5 3 ?1 CLEARCOAT
Hydroxy Acrylic Resin D, Hydroxy Acrylic Resin J, Polyester Resin E, Solvent naphtha (petroleum) light aromatic, n-Butyl Acetate, Propylene Glycol Monomethyl
Ether Acetate, 2-butoxyethyl acetate, Xylene (1-5%), Acetone (37.4%).
Gallon Weight: 7.76 lb Solvent Density: Heavier than air
% Solids by Weight: 43.92 H: 2 F: 3 R: 0
% Solids by Volume: 36.5 Flash Point: 0癋
V.O.C AP lbs/Gall: 1.45 OSHA Storage: 1B
V.O.C AP g/l 173.3
V.O.C LE lb gal less Water & Exempt: 2.59
V.O.C LE grams pl less Water & Exempt: 309.9
Product Code: PRO-SPRAY PSC-9100-2, PSC-9100-5 2.1 VOC GLAMOUR CLEARCOAT
Hydroxy Acrylic Resin G, Hydroxy Acrylic Resin H, Acetone (10-20%). n - Butyl Acetate (5-10%), Aromatic Hydrocarbons (1-5%), 2-butoxyethyl acetate (1-5%),
Methyl Amyl Ketone (1-5%),
Parachlorobenzotrifluoride (PCBTF) (20-30%).
Gallon Weight: 8.86 lb Solvent Density: Heavier than air
% Solids by Weight: 42.77 H: 2 F: 3 R: 0
% Solids by Volume: n/av Flash Point: 0癋
V.O.C AP lbs/Gall: 1.38 OSHA Storage: 1B
V.O.C AP g/l 165
V.O.C LE lb gal less Water & Exempt: 2.21
V.O.C LE grams pl less Water & Exempt: 265
NOTE: When properly mixed with activator VOC LE Less Water & Exempts as applied: 2.1 lbs/gal or <250 g/l
Product Code: PRO-SPRAY PSC-9200-2, PSC-9200-5, PSC-9200-25 2.1 VOC PRODUCTION CLEAR
Hydroxy Acrylic Resin G, Polyester Resin D, Acetone (40-50%). n - Butyl Acetate (1-5%), Parachlorobenzotrifluoride (PCBTF) (20-30%).
Gallon Weight: 8.19 lb Solvent Density: Heavier than air
% Solids by Weight: 32.31 H: 2 F: 3 R: 0
% Solids by Volume: n/av Flash Point: 0癋
V.O.C AP lbs/Gall: 0.81 OSHA Storage: 1B
V.O.C AP g/l 97
V.O.C LE lb gal less Water & Exempt: 2.02
V.O.C LE grams pl less Water & Exempt: 242
NOTE: When properly mixed with activator VOC LE Less Water & Exempts as applied: 2.1 lbs/gal or <250 g/l
MSDS 16 Page 5
|