Fine-L-Kote UR
MATERIAL SAFETY DATA SHEET
Finished Product
01/08/2003
Date-Issued:
2104-12S
MSDS Ref. No:
12/08/2004
Date-Revised:
5
Revision No:
Fine-L-Kote UR
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Fine-L-Kote UR
PRODUCT DESCRIPTION: Urethane Conformal Coating
PRODUCT CODE: 2104/CAN/EUR-12S
MANUFACTURER 24 HR. EMERGENCY TELEPHONE
NUMBERS
Techspray, L.P. CHEMTREC (US Transportation) : (800) 424 - 9300
1001 N.W. 1st Street CANUTEC (Canadian Transportation) : (613) 996 - 6666
P.O. Box 949 Emergency Phone : (800) 858 - 4043
Amarillo, TX 79107
Contact: Chemtrec
Product Stewardship: 1-800-858-4043
2. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name Wt.% CAS# EINECS#
n-Propyl acetate 20 - 30 109-60-4 2036861
Urethane prepolymer 15 - 30
1330-20-
Xylenes (o-,m-,p- isomers) 20 - 24
7
202-849-
ethylbenzene 5-8 100-41-4
4
203-726-
Tetrahydrofuran 15 - 20 109-99-9
8
1,1,1,2-Tetrafluoroethane (HFC-134a) 25 - 40 811-97-2 223770
EEC LABEL SYMBOL AND CLASSIFICATION
R11 - Highly flammable.
EEC Highly flammable - "F"
Fine-L-Kote UR
R20/21 - Harmful by inhalation and in contact with skin.
EEC Harmful - "Xn"
R36 - Irritating to eyes.
R52/53 - Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
EEC Environment - "N"
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
IMMEDIATE CONCERNS: Flammable liquid and vapor. Vapors and/or aerosols which may be formed at
elevated temperatures may be irritating to eyes and respiratory tract.
POTENTIAL HEALTH EFFECTS
EYES: Severely irritating. If not removed promptly, will injure eye tissue, which may result in permanent
damage.
SKIN: Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin
irritation and dermatitis (rash). Absorption through intact skin is possible.
SKIN ABSORPTION: Skin absorption can occur.
INGESTION: Single dose toxicity is low to moderate. If vomiting occurs, liquid can be aspirated into lungs,
causing chemical pneumonia/systemic effects. Psychotropic, CNS, and gastrointestinal effects possible.
INHALATION: Prolonged or repeated inhalation may cause lung damage and/or central nervous system
disturbances.
SIGNS AND SYMPTOMS OF OVEREXPOSURE
EYES: Symptoms of overexposure include: stinging, tearing, redness and pain.
SKIN: Prolonged exposure causes redness, pain, drying and cracking of the skin.
INGESTION: Swallowing of this material may result in nausea, vomiting and weakness followed by central
nervous system depression.
INHALATION: High concentrations may lead to central nervous system effects (drowsiness, dizziness, nausea,
headaches, paralysis and loss of consciousness).
ACUTE TOXICITY: Overexposure may cause dizziness and loss of concentration. At higher levels, CNS
depression and cardiac arrhythmia may result.
ROUTES OF ENTRY: Inhalation is major route of entry.
SENSITIZATION: Possible cardiac sensitization.
Fine-L-Kote UR
4. FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention.
SKIN: Immediately flush with large amounts of water. Use soap if available. Remove contaminated clothing,
including shoes, after flushing has begun. Get prompt medical attention.
INGESTION: Do not induce vomiting. Give milk or water. Get immediate medical attention immediately.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained
personnel. Seek immediate medical attention.
5. FIRE FIGHTING MEASURES
FLASHPOINT AND METHOD: 27.2癈 (81癋)TAG CC
FLAMMABLE LIMITS: LEL: 1.0% to UEL: 7.0%
GENERAL HAZARD: Flammable Liquid. Can release vapors that form explosive mixtures at temperatures at or
above the flash point.
EXTINGUISHING MEDIA: Water, foam, dry chemical, carbon dioxide.
HAZARDOUS COMBUSTION PRODUCTS: Smoke, fumes and oxides of carbon.
EXPLOSION HAZARDS: Vapors may form explosive mixture with air.
FIRE FIGHTING PROCEDURES: Use water spray to keep fire-exposed containers cool and to knock down
vapors which may result from product decomposition.
FIRE FIGHTING EQUIPMENT: As in any fire, wear self-contained breathing apparatus pressure-demand,
(MSHA/NIOSH approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Dike area to contain spill. Take precautions as necessary to prevent contamination of ground and
surface waters. Recover spilled material on adsorbent, such as sawdust or vermiculite, and sweep into closed
containers for disposal. After all visible traces, including ignitible vapors, have been removed thoroughly wet
vacuum the area. Do not flush to sewer. If area of spill is porous, remove as much contaminated earth and gravel,
etc. as necessary and place in closed containers for disposal.
GENERAL PROCEDURES: Forms smooth, slippery surfaces on floors, posing an accident risk. Wear a self-
contained breathing apparatus and appropriate personal protective equipment. (See Exposure Controls/Personal
Protection Section). Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust.
7. HANDLING AND STORAGE
Fine-L-Kote UR
HANDLING: Empty containers will retain product residue and vapor and should be handled as if they were full.
STORAGE: Store in a cool place in original container and protect from sunlight.
STORAGE PRESSURE: Store at local atomspheric pressure.
STORAGE TEMPERATURE: Store in a cool place below ( 120 ) F (49 ) C.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE GUIDELINES:
OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200)
EXPOSURE LIMITS
Chemical Name OSHA PEL ACGIH TLV Supplier OEL
3 3 3
ppm mg/m ppm mg/m ppm mg/m
200 200
n-Propyl acetate TWA
ppm ppm
250 250
STEL
ppm ppm
Urethane prepolymer
435 434
Xylenes (o-,m-,p- isomers) TWA
mg/m3 mg/m3
150 651
STEL
ppm mg/m3
200 250 200 590 NL NL mg/
Tetrahydrofuran TWA [1] mg/m3 ppm mg/m3 ppm m3
ppm
590 735 250 737 NL NL mg/
STEL
ppm mg/m3 ppm mg/m3 ppm m3
1,000
1,1,1,2-Tetrafluoroethane (HFC-134a) TWA NE NE [2]
ppm
OSHA TABLE COMMENTS:
1. NL = Not Listed
2. * (AEL)=Acceptable Exposure Limit as established by the manufacture
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to
control airborne levels below recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear safety glasses with side shields (or goggles) and a face shield.
SKIN: The glove(s) listed below may provide protection against permeation. Gloves of other chemically
resistant materials may not provide adequate protection. Viton, Solvex, Butyl, Buna, Neoprene. Butyl Rubber
Solvex
RESPIRATORY: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements
Fine-L-Kote UR
must be followed whenever workplace conditions warrant a respirator's use.
WORK HYGIENIC PRACTICES: Wash hands before eating and wash before reuse.
OTHER USE PRECAUTIONS: Emergency shower and eyewash facility should be in close proximity.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
ODOR: Aromatic odor.
APPEARANCE: Clear water-white viscous liquid with aromatic odor.
COLOR: Colorless
PERCENT VOLATILE: 60
VAPOR DENSITY: >1 (Air=1)
BOILING POINT: 149癈 (300癋)
FREEZING POINT: Not Determined
SOLUBILITY IN WATER: Insoluble
EVAPORATION RATE: Not Established
DENSITY: 0.93
(VOC): 744 g/L (non-exempt VOC)
10. STABILITY AND REACTIVITY
STABLE: YES
HAZARDOUS POLYMERIZATION: NO
CONDITIONS TO AVOID: Heat, flames, ignition sources, and incompatables.
STABILITY: Stable.
POLYMERIZATION: Occurs with water.
HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of Carbon (CO and CO2) may form when heated to
decomposition.
INCOMPATIBLE MATERIALS: Metals. Acidic conditions. Oxidizing materials.
11. TOXICOLOGICAL INFORMATION
ACUTE
EYES: 20 mg
Moderately to severely irritating
DERMAL LD : >20 mg/kg (rabbit)
50
ORAL LD : 9370 mg/kg (rat)
50
Fine-L-Kote UR
INHALATION LC : 8000 ppm, 4-hour
50
EYE EFFECTS: High vapor concentrations may cause moderate to severe eye irritation.
SKIN EFFECTS: Causes irritation to skin.
CARCINOGENICITY:
IARC: NOT listed
NTP: NOT listed
OSHA: NOT listed
REPRODUCTIVE EFFECTS: Xylenes listed as a reproductive hazard.
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: There is limited information available on the environmental fate and effects of this
material. The primary environmental concern for release is the impact on aquatic and terrestrial species. Due care
should be taken to avoid the accidental release of this material into the environment.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Federal, State, and Local laws governing disposal of materials can differ. Ensure
compliance with proper authorities before disposal.
GENERAL COMMENTS: Dispose of in a manner consistent with federal, state, and local regulations.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION)
PROPER SHIPPING NAME: CONSUMER COMMODITY ORM-D
PRIMARY HAZARD CLASS/DIVISION: No classification
UN/NA NUMBER: NA
PACKING GROUP: NA
AIR (ICAO/IATA)
PROPER SHIPPING NAME: CONSUMER COMMODITY ID8000
PRIMARY HAZARD CLASS/DIVISION: 9
UN/NA NUMBER: ID8000
PACKING GROUP: II
IATA NOTE: Domestic shipments only. When shipping International contact TechSpray shipping department.
VESSEL (IMO/IMDG)
PROPER SHIPPING NAME: AEROSOLS IN LIMITED QUANTITIES OF CLASS 2
PRIMARY HAZARD CLASS/DIVISION: 2
UN/NA NUMBER: UN1950
PACKING GROUP: NA
Fine-L-Kote UR
IMDG NOTE: Page 2102
EUROPEAN TRANSPORTATION:
ADR/RID HAZARD CLASSIFICATION: 2.1
ADR/RID ITEM NUMBER: UN1950
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT)
311/312 HAZARD CATEGORIES: IMMEDIATE / DELAYED
FIRE: YES PRESSURE GENERATING: YES ACUTE: YES CHRONIC: YES
313 REPORTABLE INGREDIENTS: Xylene Ethylbenzene
CERCLA (COMPREHENSIVE RESPONSE, COMPENSATION, AND LIABILITY ACT)
CERCLA REGULATORY: Listed in table 302.4 of 40CFR Part 302 as a hazardous substance with a
reportable quantity. Releases to air, land, or water which exceed the RQ must be reported to the national
response center.
CERCLA RQ: 1000 Lbs.
TSCA (TOXIC SUBSTANCE CONTROL ACT)
TSCA STATUS: All chemicals in this product are listed in the TSCA inventory.
RCRA STATUS: U239 D001
OSHA HAZARD COMM. RULE: Contents of this MSDS comply with the OSHA Hazard Communication
Standard 29 CFR 1910.1200.
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA)
29 CFR 1910.119---PROCESS SAFETY MANAGEMENT OF HIGHLY HAZARDOUS
CHEMICALS: None of the chemicals in this product are considered highly hazardous by OSHA.
CANADA
WHMIS (WORKER HAZARDOUS MATERIALS INFORMATION SYSTEM): This MSDS has been
prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains
all of the information required by the CPR.
WHMIS CLASS: Class A, B5, D2B (Aerosol, Flammable Aerosol, Toxic Materials)
EUROPEAN COMMUNITY
EEC LABEL SYMBOL AND CLASSIFICATION
R11 - Highly flammable.
EEC Highly flammable - "F"
Fine-L-Kote UR
R20/21 - Harmful by inhalation and in contact with skin.
EEC Harmful - "Xn"
R36 - Irritating to eyes.
R52/53 - Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
EEC Environment - "N"
CALIFORNIA PROPOSITION 65: This product does not contain any chemicals known to the State of California
to cause cancer.
STATES WITH SPECIAL REQUIREMENTS
Pennsylvania: Massachusetts: New Jersey:
Tetrahydrofuran
GENERAL COMMENTS: 1,1,1,2-tetrafluoroethane is subject to U.S. Environmental Agency Clean Air Act
Regulations, (40CFR Part 82).
16. OTHER INFORMATION
APPROVED BY: Pierce A. Pillon TITLE: Chemist
PREPARED BY: Steve Cook
REVISION SUMMARY Revision #: 5 This MSDS replaces the November 09, 2004 MSDS. Any changes in
information are as follows: In Section 14 ADR/RID Hazard Class ADR/RID Item Number
NFPA CODES
HMIS RATING
2
HEALTH:
3
3
FLAMMABILITY:
1
PHYSICAL HAZARD: 2 1
PERSONAL PROTECTION:
DATA SOURCES: Code of Federal Regulations (CFR) The Sigma-Aldrich Library of Regulatory and Safety Data
OSHA Hazard Communication Standard (29CFR1910.1200) Various Federal, State and Local Regulations
MANUFACTURER DISCLAIMER: To the best of our knowledge, the information contained herein is accurate.
However, neither Tech Spray, L.P., or any of its subsidiaries assumes any liability whatsoever for the accuracy or
completeness of the information contained herein. Final determination of suitability of any material is the sole
responsibility of the user. All materials may present unknown hazards and should be used with caution. Although
certain hazards are described herein, we cannot guarantee that these are the only hazards which exist.
|