MATERIAL SAFETY DATA SHEET
Quality Oil Company
QOC AW 46 Hydraulic Fluid
55 N. 400 E.
Valparaiso, IN 46383
Tel: 800-999-2951
MSDS on-line: www.qualityoil.com
24-HOUR EMERGENCY NUMBERS:
MSDS No: 140
Ver. No: 2 PERS 1-800-633-8253
Ver. Date: 02/01/08 INT'L PERS 1-801-629-0667
CUSTOMER SERVICE:
800-999-2951
National Fire Protection Association HMIS Rating Protective Equipment:
1 Health Health 1
1 Flammability Flammability 1
0 Reactivit y Reactivity 0
0 Special Special 0
SECTION 1 ?CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: Quality Oil AW 46 Hydraulic Fluid
Product Description: AW 46 Hydraulic Fluid
Chemical Name: Hydraulic Fluid
Chemical Family: Blend
Product Code: 140
Other Designations: None
General Use: Hydraulic Fluid
Manufacturer: P.O. Box 1119, Evergreen, CO 80437
(Hours of operation: Mon-Fri 7:00am-5:00pm MST)
SECTION 2 ?COMPOSITION / INFORMATION ON INGREDIENTS
EXPOSURE GUIDELINES OSHA ACGIA
Component/CAS Number LO% HI% TWA STEL TWA STEL UNIT
Limits for the Product 5 5 MG/M3
SEVERELY SOLVENT REFINED HEAVY PARAFFINIC PETROLEUM OIL
64741-88-4 90.00 100.00 5 5 MG/M3
ZINC DIALKYL DITHIOPHOSPHATE
64649-42-3 0.0 1.0 No Specific Limit
?008 Quality Oil Company MSDS # 140
- - - FOR DISCLAIMER OF LIABILITY SEE FINAL PAGE - - - Page 1 of 5
ACRYLIC COPOLYMER
68171-46-0 .00 1.00 NO SPECIFIC LIMIT
CALCIUM SULFONATE
61789-86-4 .00 1.00 NO SPECIFIC LIMIT
2-ETHYLHEXANOL
104-76-7 .00 1.00 NO SPECIFIC LIMIT
ADDITIONAL EXPOSURE LIMITS --------------------------------------- GOVERNMENT REGULATION
OTHER LIMIT ?OIL MIST: 5MG/M3 OSHA PEL/ACGIH TLV
SECTION 3 ?HAZARDOUS IDENTIFICATION (HMIS)
EMERGENCY OVERVIEW
MAY CAUSE SKIN IRRITATION
APPEARANCE: Amber Fluid ODOR: Slight Odor
POTENTIAL HEALTH EFFECTS:
SKIN CONTACT: PRACTICALLY NON- TOXIC IF ABSORBED (LD50 > 2000 MG'KG). MAY CAUSE
MODERATE IRRITATION WITH PROLONGED OR REPEATED CONTACT..
CARCINOGEN LISTED BY: IARC(N0) NTP(NO) OSHA9NO) ACGIH(NO) OTHER(NO)
SECTION 4 ?FIRST AID MEASURES
Emergency and First Aid Procedures: Eye contact: Flush eyes with large amounts of water for at least 15
minutes. If irritation persists, obtain medical attention.
Skin contact: Wash affected area thoroughly with soap and water until
no odor remains. If redness or swelling develops, obtain
medical assistance. Wash clothing before reuse.
Ingestion: Practically non-toxic. Induction of vomiting not required.
Obtain medical emergency medical attention. Small
amounts which accidentally enter mouth should be rinsed
out until taste of substance is no longer detected.
Inhalation: Move to fresh air.
Note to Physicians: Treat symptomatically
Special Precautions/Procedures: None known
SECTION 5 ?FIRE-FIGHTING MEASURES
Extinguishing Media: Water spray, dry chemical,
carbon dioxide (CO2), foam.
405 篎 Minimum COC, 207 篊
Flash Point: NFPA
Minimum COC
1
Flash Point Method: Cleveland Open Cup
0 1
Auto Ignition Temperature: 675 篎 (Estimated)
0
359 篊 (Estimated)
Flammable (Explosive) Limits (% by Lower: Not Applicable
volume in air): Upper: Not Applicable
Flammability Classification: Not Flammable
Fire-Fighting Instructions; This material will burn although it is not easily ignited. For fires involving
this material, do not enter any confined space without proper PPE, including
an SCBA.
Fire-Fighting Equipment: Fire may produce toxic thermal decomposition products; wear an (SCBA).
?008 Quality Oil Company MSDS # 140
- - - FOR DISCLAIMER OF LIABILITY SEE FINAL PAGE - - - Page 2 of 5
Hazardous Combustion Products: Highly dependent on combustion conditions. A complex mixture forms
when this material undergoes combustion. Examples: carbon dioxide, water
vapor, unidentified organic compounds.
SECTION 6 ?ACCIDENTAL RELEASE MEASURES
Spill/Leak Procedures: Recover usable material by convenient method; residual may be removed
by wipe or wet mop
Small Spills: Small spills should be absorbed with a suitable inert material (sand, earth,
clay, etc.). Remove the absorbed material and place in an appropriate
chemical waste container for disposal.
Large Spills: For large spills, dike and pump into suitable containers. Clean up residual
with suitable inert material..
Containment: For large spills, dike far ahead of liquid spill for later disposal.
Regulatory Requirements: Follow applicable Federal, State and Local regulations.
SECTION 7 ?HANDLING AND STORAGE
Precautionary Measures: Keep out of reach of children.
Static Hazard: Electrostatic charge may accumulate and create a hazardous condition
when handling this material. To minimize this hazard, bonding and
grounding may be necessary but may not, by themselves, be sufficient.
Storage Requirements: NFPA Class IIIB Storage.
SECTION 8 ?EXPOSURE CONTROLS/PERSONAL PROTECTION
General Considerations: Consider the potential hazards of this material (see Section 3), applicable
exposure limits, job activities, and other substances when designing
engineering controls suitable for the workplace.
Engineering Controls: Use in a well ventilated area.
Protective Clothing/Equipment:
Skin: No special protective clothing is normally needed.
Eye/Face: No special eye protection is normally needed.
Respiratory Protection: No respiratory protection is normally needed.
Work and Hygienic Practices: Wash or rinse hands before touching eyes or contact lenses, and before
eating.
Safety Stations: Make emergency eyewash stations, safety/quick-drench showers, and
washing facilities available in work area.
SECTION 9 ?PHYSICAL AND CHEMICAL PROPERTIES
Appearance and odor: Amber Fluid, Slight Odor
Evaporation Rate: 1000X Slower (ETHYL ETHER=1)
Boiling Point: High
Vapor Pressure: <0.0001 (MM HG @ 20癈)
Pour Point, 篊: -34 (Estimated)
Specific Gravity (water =1): 0.86 (Estimated)
API Gravity: 31.0 (Estimated)
Viscosity @ 40 篊, CST: 46 CST (Estimated) 225 SUS @ 100癋
Vapor Density (Air =1): >1
Solubility: Soluble
Molecular Weight: N/A (G/MOLE)
Melting Point: N/A
Packing Density: N/A
Octanol / Water Coeff.: N.D.
Odor Threshold: N.D.
Vapor Density: 10+ (Air = 1)
?008 Quality Oil Company MSDS # 140
- - - FOR DISCLAIMER OF LIABILITY SEE FINAL PAGE - - - Page 3 of 5
SECTION 10 ?STABILITY AND REACTIVITY
Stability: Stable
Hazardous Polymerization: Will not occur.
Materials to Avoid: Strong oxidizing agents.
Conditions to Avoid: Strong oxidizing agents.
Hazardous Decomposition: Combustion will produce carbon monoxide and asphyxiants.
SECTION 11 ?TOXICOLOGICAL INFORMATION
FOR THE PRODUCT ?br>
INHALATION: Low acute toxicity. SKIN: expected to be acutely non-toxic if absorbed. mild irritation with
prolonged/repeated contact. EYE: mildly irritating on contact. ORAL: practically non-toxic
SEVERELY SOLVENT REFINED HEAVY PARAFFINI C PETROLEUM OIL ?br>
INHALATION: low acute toxicity. SKIN: practically non-toxic if absorbed may cause moderate irritation with prolonged
and repeated contact. EYE: minimally irritating on contact. INGESTION: Practically non-toxic if swallowed.
ETHYLENE/PROPYLENE COPOLYMER: No data available for all routes of exposure
ZINC DIALLKLY DITHIO PHOSPHATE
INHALATION: Toxic hydrogen sulfide is generated when heated above 200 deg. F. This can cause central nervous
system (brain) effects, nausea, dizziness, confusion, loss of sense of smell, muscle cramps, in coordination,
unconsciousness, coma, respiratory failure, or death.
SKIN: Prolonged or repeated contact may cause moderate irritation, redness, drying, cracking, dermatitis.
EYE: Irritant. ORAL: Harmful if swallowed. BORATED POLYISOSOBUT ENYL SUCCINIC ANHYDRIDE ?br>
No data available for all routes of exposure.
ACRYLIC COPOLYMER: No data available for all routes of exposure.
SEVERELY SOLVENT REFINED HEAVY PARAFFINI C PETROLEUM OIL: INHALATION: low acute toxicity.
SKIN: practically non-toxic if absorbed may cause moderate irritation with prolonged and repeated contact.
EYE: minimally irritating on contact.
INGESTION: Practically non-toxic if swallowed. ALKYL DIPHENYLAMINE: No data available for inhalation or eye
contact. SKIN: Possible allergic reaction. ORAL: Toxic if swallowed. May cause loss of appetite, diarrhea, & death.
POLYBUTENE: No significant effects by inhalation, skin absorption, or eye contact. ORAL: Practically nontoxic if
swallowed.
SECTION 12 ?ECOLOGICAL INFORMATION
Ecotoxicity: No Data Available.
Environmental Fate: This material is not expected to be readily biodegradable.
SECTION 13 ?DISPOSAL CONSIDERATIONS
Waste disposal method: Do not flush to drain/sewer. Contact an authorized disposal service.
Disposal should be in accordance with all applicable federal, state and local
laws and regulations.
Container Cleaning and Disposal: Containers should be cleaned of residual product before disposal, and
disposed of in accordance with all applicable laws and regulations.
?008 Quality Oil Company MSDS # 140
- - - FOR DISCLAIMER OF LIABILITY SEE FINAL PAGE - - - Page 4 of 5
SECTION 14 ?TRANSPORT INFORMATION
DOT Shipping Name: Non-Hazardous Petroleum Lubricating Oil
Shipping Symbols: Not Regulated
Hazard Class: Not Regulated
DOT Identification No.: Not Regulated
Packing Group: Not Regulated
Label: Not Regulated
Packaging Authorizations: Not Regulated
Quantity Limitations: None
SECTION 15 ?REGULATORY INFORMATION
TSCA: This material is in compliance with the TOXIC SUBSTANCES CONTROL ACT (15 USC 2601 -2629) and is
listed in the TSCA Inventory.
SARA 302 THRESHOLD PLANNING QUANTITY, N/A
SARA 304 REPORTABLE QUANTITY N/A
SARA 311/312 REPORTING: Health Immediate (Acute) No
Health Delayed (Chronic) No
Physical Fire No
Physical Sudden Release of Pressure No
Physical Reactive No
When a product and/or component is listed below, the regulatory list on which it appears is indicated. ZINC
DIALKYL DITHIOPHOSPHATE ?NJ 01
01=SARA 313 02= SARA 302/304 03=IARC CARCINOGEN
04=OSHA CARCINOGEN 05=ACGIH CARCINOGEN 06=NTP CARCINOGEN
07=CERCLA 302.4 08=WHMIS CONTROLLED PROD.
10=OTHER CARCINOGEN
PA=PA RTK NJ=NEW JERSEY RTK CA=CALIFORNIA PROP 65
MA=MASS. RTK MI-MICHIGAN 406 MN=MINNESOTA RTK
FL=FLORIDA RI=RHODE ISLAND IL=ILLINOIS
NY=NEW YORK WV=WEST VIRGINIA CT=CONNECTICUT
LA=LOUISIANA ME=MAINE OH=OHIO
SECTION 16 ?OTHER INFORMATION
Prepared By: Quality Oil Company
Disclaimer: THE INFORMATION GIVEN HEREIN IS GIVEN IN GOOD FAITH AND FROM SOURCES WE BELIEVE
RELIABLE. BUT NO WARRANTY, EXPRESS OR IMPLIED, REGARDING ITS CORRECTNESS IS MADE.
The conditions or methods of handling, storage, use and disposal of this product are beyond our control and may be
beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for
loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of this
product.
This MSDS was prepared and is to be used only for this product. If the product is used as a component in another
product, this MSDS information may not apply.
CONSULT QUALITY OIL COMPANY FOR FURTHER INFORMATION
?008 Quality Oil Company MSDS # 140
- - - FOR DISCLAIMER OF LIABILITY SEE FINAL PAGE - - - Page 5 of 5
|