MATERIAL SAFETY DATA SHEET
ENGLISH
1. IDENTIFICATION: 5. HEALTH HAZARDS DATA:
Name: Para-Nitro-Aniline (PNA)
All the above listed chemicals or biologicals may be harmful by
inhalation, ingestion, or skin adsorption. Nasal irritation, eye
Product number: AAR014A reddening, and allergic reactions may result from overexposure.
First aid:
Composition: 1 x 5ml
- If swallowed, wash out mouth with water provided person is
conscious. Medical advice is necessary.
Manufacturer: HYPHEN BioMed
ZAC Neuville Universit??155 rue d'Eragny
-In case of contact with eyes, flush with copious amounts of
95000 Neuville sur Oise
water, for at least 15 minutes. Assure adequate flushing by
(France)
separating the eyelids with fingers.
Tel: 33.1.34.40.65.10
Fax: 33.1.34.48.72.36
-In case of inhalation, remove victim to fresh air, and seek
medical advice.
2. APPLICATION/INTENDED USE:
-In any case of overexposure, call a physician.
This reagent should be used only by suitable trained personnel,
6. FIRE AND EXPLOSION HAZARD DATA:
wearing the appropriate laboratory protective clothing, particularly
eye and skin protection. It must be used according strictly to the
Flammability: Solutions are aqueous and non-flammable. Only
instructions of package insert, and for the indicated purpose. The carton boxes, dry chemical, interiors inserts are flammable.
reagent should be stored within the manufacturer's box at the
Extinguishing Media: Carbon dioxide, dry chemical powder or
specified temperature (2-8癈) and handled as per pack insert
appropriate foam.
instructions.
Special fire fighting procedures: Wear self-contained breathing
apparatus and protective clothing to prevent contact with skin.
The information provided in this material safety data sheet is 7. REACTIVITY DATA:
believed to be correct and does not purport to be all inclusive and
shall be used only as guide. HYPHEN BioMed and its appointed Stability: Stable
agents/distributors or OEM contractors shall not be held liable for
Hazardous combustion or decomposition products: Carbon
any damage resulting from or from contact with the products
monoxide, carbon dioxide, nitrogen oxide.
included in the kit.
Hazardous polymerisation: Does not occur.
3. COMPOSITION/INFORMATION ON INGREDIENTS:
8. SPILL, LEAK AND DISPOSAL PROCEDURES:
PNA: Contains PNA (<0.1mg), Kathon CG (<5mg).
Steps to be taken if material is released or spilled:
- Sweep up, place in a bag and hold for waste material. Avoid
4. TOXICITY HAZARDS: raising dust. Ventilate area and wash spill site after material
pickup is complete.
Reagents Chemical CAS N? % or Classification LD50
compounds w eight (oral)
pNA 100-01-6 < 2% R23/24/25-33- NA
- Waste disposal method:
52/53 S28-36/37-
PNA solution 45-61
Comply with all federal, state and local environmental
Kathon CG 26530-20-1 < 0.1% NA NA
regulations on waste handling and disposal.
Creation: April 2008
Revision 2
1/2 D.730.05/AR/014A
6560 Gove Court Phone: 513-770-1991 Toll Free: 866-783-3797 FAX: 513-573-9241
Mason, OH 45040 Web: www.aniara.com Email: info@aniara.com
Local, State and Federal regulations for this kind of product must
be respected.
9. ECOLOGY INFORMATION:
The reagent must be stored in an appropriate refrigerated area,
Use of the product can involve external environmental pollution.
specifically dedicated for in vitro research devices.
Do not empty into waters or drains.
All the storage constraints are indicated on the package labels
and on the kit insert.
10. PRECAUTIONS TO BE TAKEN IN HANDLING AND
STORAGE:
15. QUALITY MANAGEMENT INFORMATION:
Must be only used by suitable trained and informed personnel.
This reagent is designed, manufactured, controlled and followed
according to the quality management system (based on ISO 9001
Wear chemical resistant gloves, chemical safety goggles and
and ISO 13485) developed by HYPHEN BioMed.
protective laboratory clothing.
16. OTHER INFORMATION:
11. TOXICOLOGICAL INFORMATION: For in vitro research use only.
The reagent is intended for in vitro use only, by experienced Disclaimer: The information reported on this MSDS is believed
and suitably trained personnel. There is no special risk when to be accurate and represents the best information available to
used in these conditions. Products may be toxic following skin us. However, we make no warranty of merchantability or any
or eye contact, inhalation or ingestion. For toxicity of other warranty, expressed or implied, with respect to such
components, refer to chapters 4 and 5. information, and we assure no liability resulting from its use.
Users should make their own investigations to determine the
suitability of the information for their particular purposes.
12. WASTE DISPOSAL CONSIDERATIONS:
Any waste product or reagent must be discarded according to
local considerations.
Do not reuse vials or containers.
13. PHYSICAL AND CHEMICAL PROPERTIES:
Stable solution.
The specific cautions for handling this reagent, and the chemical
reactivity, are specifically outpointed in paragraph 7.
14. TRANSPORT AND STORAGE INFORMATION:
The reagent must be shipped adequately packaged and protected
from any break during transportation.
It can be shipped at ambient temperature for a short period, not
exceeding 7 days. It must be stored in a cold room at 2-8癈 upon
receipt.
No special regulation for transporting this product.
General rules for in vitro research should apply.
Creation: April 2008
Revision 2
2/2 D.730.05/AR/014A
6560 Gove Court Phone: 513-770-1991 Toll Free: 866-783-3797 FAX: 513-573-9241
Mason, OH 45040 Web: www.aniara.com Email: info@aniara.com
|