MATERIAL SAFETY DATA SHEET
IDENTITY (As used on label and list) Note: Blank spaces are not permitted. If any item is not applicable or no
information is available, the space must be marked to indicate that.
TURBO BOND STRUCTUAL ADHESIVE
** INSTANT ADHESIVE **
SECTION I
Manufacturer's Name Emergency Telephone Number
1800 964-6660
Palm Labs., Inc
Telephone Number For Information.
10 Office Way, Suite 250
843 686-2345
Hilton Head, SC, 29928
Date Prepared
12/16/08
Signature of Preparer (optional)
SECTION II - Hazardous Ingredients/Identity Information
COMPONENTS WITH EXPSURE LIMITS CAS NO % ACGIH TLV IARC OSHE PEL
High Boiling Methacrylate Proprietary 35-55 None None None
Polyurethane Methacrylate Resin Proprietary 5-10 None None None
High Boiling Monomer 5888-33-5 20-28 None None None
Hydroxalkyl Methacrylate 868-77-9 10-30 None None None
Dimethacrylate 7534-94-3 15-25 None None None
Cumene Hydroperoxide 80-15-9 0.5-1.0 None None None
SECTION III - Physical/Chemical Characteristics
Appearance Boiling Point Specific Gravity (H2O=1)
Clear amber liquid 1.06
Na
Solubility in Water Melting Point Vapor Pressure(mm/Hg.)
Insoluble 6 mm Hg at 30 C.
300 F.
VOC content: Evaporation Rate
Na Na
SECTION IV - Fire And Explosion Hazard Data
Flash Point (Tagliabue Closed Cup) Flammable Limits LEL UEL
> 200 F Not available
Extinguishing Media
Water spray, foam , dry chemical or carbon dioxide
Special Fire Fighting Procedures
Firefighters should wear self-contained breathing apparatus and full protective clothing. No unusual fire or explosive hazards.
SECTION V - Reactivity Data
Stability Unstable Conditions To Avoid
Stable X
Incompatible Materials to Avoid Oxidizers, amines, strong lewis or mineral acids, thiosulfates.
Smoke and toxic fumes may evolve as result of uncontrolled
exothermic reaction of large masses of material reacting with
curing agents, such as peroxides, amines, or exposure to light.
Hazardous Decomposition Or Byproducts
Hazardous May Occur X Conditions to avoid:
Polymerization Storage in contact with or near heat, moisture, sunlight.
Will Not Occur
SECTION VI - Health Hazard Data
Routes of Entry Inhalation? Skin? Ingestion?
Yes No Yes
Health Hazards (Acute And Chronic) VAPORS; Inhalation- irritating to mucus membrane and eyes. Causes headache.
SKIN CONTACT; bonds instantly, do not pull apart, may cause burnes. Soak in warm soapy water or apply acetone.
First Aid Measures: Inhalation Remove to fresh Air. UIf symptons develop or persist, get medical attention.
Skin Contact Soak in warm water, do not pull apart. Get medical attention if symtons occur.
Eye Contact Flush with lukewarm water for fifteen minutes holding eyelids open entire time. Get medical help.
Ingestion Do not induce vomiting. Get medical attention.
Carcinogenicity NTP Carcinogen IARC Carcinogen OSHA Carcinogen
High Boiling Methacrylate No No No
Polyurethane Methacrylate Resin No No No
High Boiling Monomer No No No
Hydroxalkyl Methacrylate No No No
Dimethacrylate No No No
Cumene Hydroperoxide No No No
Signs and Symptoms of Exposure.
Inhalation- throat irritation, coughing. Remove to fresh air
Toxicity; Skin contact may cause burns. Bonds skin rapidly and stongly. Skin and Eye irritant. Estimated oral LD50 more than 500mg/kg.
Esimated dermal LD50 more than 2000 mg/kg.
Signs and Symptoms of exposure; Vapor is irritating to eyes and mucous membranes above TLV. Exposure to vapors above the established
limits may cause systems on non-allergic Asthma.
Medical Conditions; Respiratory Condition.
Generally Aggravated by Exposure. Respiratory Irritation may be brought on by inadequate ventilation
Emergency and First Aid Procedure
SKIN contact: - Soak in warm soapy water or acetone. Do not pull apart, will separate by itself
EYES contact: Instantly FLUSH EYES with warm water for fifteen minutes, contact Physician.
LIP contact: Flush with warm water, do not pull apart. Gently roll lips open.
SECTION VII - Precautions for Safe Handling and Use
Steps to Be Taken in Case Material is Released or Spilled
Flush with copious amounts of cool water. Allow to harden and break up and dispose of according to local regulations.
Waste Disposal Method.
Dispose of as chemical waste in accordance with current local, State and Federal regulations.
Material should be handled and stored in a cool, dry area. Containers should
Precautions to be Taken in Handling and Storing.
be kept tightly closed. Avoid storage in sunlight. For best results material should be refrigerated.
SECTION VIII - Control Measures
Respiratory Protection (Specify Type)
Ventilation Local Exhaust Special
OK
Mechanical (General) Other
ProtectiveClothing: Polyethylene Gloves Eye Protection: Safety goggles
and aprons
Other Protective Clothing or Equipment
Inhalation; Use in adequate ventalation.
ventalation ventalation
SECTION IX ?Transport Information
Land Transport (USDOT):
Proper shipping name: Unrestricted
Hazard class or division Unrestricted
Identification Number None
Packing Group None
Sea Transportation (IMDG):
Proper shipping name Unrestricted
Hazard class or division Unrestricted
Identification Number None
Packing Group None
Air Transportation (IATA/ICAO):
Proper shipping name Unrestricted
Hazard class or division Unrestricted
Identification Number None
Packing Group None
PALM LABS INC. 12/16/08