Material Safety Data Sheet
Tribolube F-197
May be used to comply with OSHA's ,Hazard Communication Standard.
QUICK IDENTIFIER
29 CFR 1910. 1200 Standard must be consulted for specific requirements.
Common Name: (used on Label and list)
SECTION 1- MANUFACTURER
Manufacturer's
HEALTH 1
Name Aerospace Lubricants, Inc
Address
FLAMMABILITY 0
Emergency
1600 Georgesville Road Telephone No.
614-878-3600
Other
City, State, and Zip
REACTIVITY 0
Columbus, Ohio 43228 Information
614-878-3600
Calls
B
PERSONAL PROTECTION
Signature of Person Date January 3, 2006
Responsible for Preparation Prepared Rev. D
Stephen E. Gates
SECTION 2- HAZARDOUS INGREDIENTS/IDENTITY
Hazardous Component(s) (chemical & common name(s) OSHA ACGIH Other Exposure % CAS
PEL TLV Limits (optional) NO.
No hazardous components were knowingly incorporated into this solvent. This product is not considered hazardous according to the OSHA
Hazardous Communication Standard 29CFR 1910.1200
Threshold Limit Value: LD50>40G/KG (Non-toxic)
OSHA Threshold Limit Value: LD50>40G/KG
ACGIH Threshold Limit Value: LD50>40G/KG
Carcinogen - NTP Program: N/A
Carcinogen - IARC Program: N/A
SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS
Boiling Specific Vapor
above 70潞C
Point Gravity (H O=1) Pressure (mm Hg)
1.68 165 torr @ 25潞C
Vapor
Density (Air=1)
N/A
Solubility Reactivity in
in Water Water
Non-reactive
14 ppm
Melting
Appearance
Point
and Odor Clear, Odorless Liquid NA
SECTION 4 - FIRE & EXPLOSION DATA
Flash UEL
Flammable Limits LEL
Method
Point Upper
in Air % by Volume Lower
N/A N/A N/A
Used N/A
N/A
Extinguisher
Auto-Ignition
Media
Temperature
N/A
Nonflammable
Special Fire
Fighting Procedures
Self contained breathing apparatus and protective clothing should be worn in fighting fires involving chemicals. Decomposition
at temperatures above 290潞C may cause the evolution of toxic gasoeus fluorine compounds.
Unusual Fire and
Explosion Hazards
Toxic fluorine gases are by-products of combustion.
Tribodat/tribomsd/F197
Tribolube F-197
SECTION 5 - PHYSICAL HAZARDS (REACTIVITY DATA)
Conditions
Stability Unstable
to Avoid
Stable X Avoid heating above 250潞C.
Incompatability
Molten alkali metals, interhalogen compounds, strong or nonaqueous alkali and Lewis acids above 100潞C
(Materials to Avoid
Hazardous
HF and COF2 (both toxic*) from thermal decomposition in air (at temperatures greater than 290潞C
Decomposition Products
May Cccur
Hazardous Conditions
Avoid heating above 250潞C
Will Not Occur X
polymerization to Avoid
* HF-Hydrogen fluoride has TVL/TWA=2.5mg/m鲁;
COF2 -Carbonyl fluoride has TVL/TWA=5mg/m鲁
SECTION 6 - HEALTH HAZARDS
1. Acute 2. Chronic
None None
Signs and
Mild irritant to the skin upon prolonged exposure for some individuals.
Sympton of Exposure
Decomposition products formed at high temperatures above 250潞C may cause "polymer fever."
Medical Condition Generally
No known medical condition that might be aggravated by exposure.
Aggravated by Exposure
National Toxicology I.A.R.C. OSHA Yes
Yes
Yes
Chemical Listed as Carcinogen
X
Program Monographs No
X X
No No
None
or Potential Carcinogen
Emergency and
First Aid Procedures
See below
Slightly toxic by inhalation (4 hr. LC 50 1,000-5000 ppm; 8-40 mg/l). If discomfort occurs, move to
1. Inhalation
fresh air; contact physician.
2. Eyes
ROUTES
Flush with water; if irritated, contact physician.
OF Wipe off and wash with soap and water. If irritation develops, contact physician.
3. Skin
ENTRY Very low toxicity by contact (LD50> 10,00 mg/kg)
Very low toxicity by ingestion (oral LD50>5,000 mg/kg). Give large amounts of water; contact physician. Inform
4. Ingestion
physician product is inert/non-toxic.
SECTION 7 -SPECIAL PRECAUTION AND SPILL/LEAK PROCEDURES
Precautions to be Taken
Use reasonable care. Do not store above 250潞F or near flammables or explosive material.
in Handling and Storage
Other
Toxic vapors may evolve above 250潞C; provide adequate ventilation if used above this temperature.
Precautions
Avoid spills; causes slippery surfaces.
Steps to be Taken in Case
Scrape up with proper tools; wipe up with absorbant cloth or paper towel; apply non-skid absorbant material to floor. Collect
Material is Released or Spilled
waste materials for salvage or disposal.
Waste Disposal
Methods (Consult federal, state, and local regulations)
Dispose of in accordance with current Federal, State, and Local Regulations.
SECTION 8 - SPECIAL PROTECTION INFORMATION/CONTROL MEASURES
Respiratory Protection
Not required unless product is being used as a mist.
(Specify Type)
Mechanical Special
Local Other
Ventilation
Exhaust (General)
Recommended Not required Recommended Not required
Protective Eye
Plastic disposable
Gloves Safety glasses recommended
Protection
Other Protective
Clothing or Equipment
Plastic apron, fabric laboratory coat recommended.
Work/Hygienic Practices
Do not contaminate smoking materials; wash hands and / or contaminated area after exposure.
|