Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

64742-14-9
64741-65-7
9005-90-7
64742-43-4
63148-62-9

File Name: 64742-14-9.asp

MATERIAL SAFETY DATA SHEET
According to directive EC 91/155 and EC 93/112
__________________________________________________________________________________________

MEGUIAR鈥橲 MIRROR GLAZE M-08
__________________________________________________________________________________________

Date: 01.03.1997
Printing date:
__________________________________________________________________________________________

1. IDENTIFICATION OF THE PRODUCT AND COMPANY.

Product name and/or code: Meguiar鈥檚 Mold Release Paste Wax (M-08)

Intened use: Professional use in glassfibre- and polyester industry.

Name, full address and tel. company:
Nkh Release Systems Manufacturer: Meguiar鈥檚 Inc.
Unit 29 Heath Hill Ind Estate 17991 Mitchell South
Dawley, Telford, TF4 2RH Irvine, California 92714
tel.: 01952 503022 tel.: 1-949-752 8000
fax: 01952 503088 fax: 1-949-752 5784

In case of emergency: contact Meguiar鈥檚 above or at 33-1-4405 9096
or in USA, contact CHEMTREC at (800) 424-9300
__________________________________________________________________________________________

2. COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS.

Hazardous components:
Light Distillate CAS no. 64742-14-9 Osha pel TLV No limit 10-20%
Heavy Alkalyte Naphtha CAS no. 64741-65-7 Osha pel TLV 100 ppm 20-30%
Turpentine CAS no 9005-90-7 Osha pel TLV 100 ppm 10-20%
Polymer Wax Blend TS Osha pel TLV No limit 15-25%
Parrafin Clay CAS no. 64742-43-4 Osha pel TLV No limit 10-15%
Polysiloxane CAS no. 63148-62-9 Osha pel TLV No limit 5-10%

TS: Trade secret ingredient as per 29 CFR Section 1910-1200
__________________________________________________________________________________________

3. HAZARDS IDENTIFICATION OF THE PRODUCT.

ROUTES OF ENTRY: INHALATION: YES SKIN: YES INGESTION: YES

HEALTH HAZARDS(Acute-Chronic):
May cause eye and skin irritation. Prolonged or intentional exposure to high concentrations may cause respiratory track
irritation. May be harmful if swallowed. Can cause intestinal distress.

CARCINOGENICITY: None

CONDITIONS AGGRAVED BY OVEREXPOSURE: Dermatitus




M-08. -2-
__________________________________________________________________________________________

4. FIRST AID MEASURES.
In all cases of doubt, or when symptoms persist, seek medical attention.

Inhalation:
If breathing is difficult, get medical attention and move person to fresh air.

Eye contact:
Wash eyes with clean, fresh water copiously.

Skin contact:
Wash skin thoroughly with soap and water or use recognized skin cleaner.

Ingestion:
If accidentally swallowed, give several glasses of water, but do not induce vomiting.
__________________________________________________________________________________________

5. FIRE-FIGHTING MEASURES.

Extinguishing media: dry chemical, water, foam, CO2.
__________________________________________________________________________________________

6. ACCIDENTAL RELEASE MEASURES.

Contain and absorb in metal, plastic or glass.

WASTE DISPOSAL:
Sanitary landsfills for absorbent materials, or as required by country and local regulations.

CAUTION IN HANDLING AND STORING:
Store in original containers away ftom heat, sparks and open flames.

RESPIRATORY PROTECTION:
None required for normal use

VENTILATION: LOCAL EXHAUST: Adequate MECHANICAL: NONE
SPECIAL: Use in a well ventilated area.

GLOVES(neoprene): for sensitive skin EYE PROTECTION: Where splashing occurs

OTHER PROTECTIVE EQUIPMENT: NONE
__________________________________________________________________________________________

7. HANDLING AND STORAGE.

Storage:
In accordance with local regulations.
Observe label precautions. Store between 0掳 and 40掳 C in a dry, ventilated place away from sources of heat and preferably from
direct sunlight. Store away from oxidizers and acids. Avoid extreme heat conditions.




M-08. -3-
__________________________________________________________________________________________

8. EXPOSURE CONTROLS/PERSONAL PROTECTION.

Engineering Measures.
Provide adequate ventilation.

Personal protection.
None needed for intended and correct use of the product.
Hand protection:
For prolonged or repeated contact, use resistant gloves. Likewise for sensitive skin.

Eye protection:
None needed with normal use. Where splashing occurs, safety-glasses are recommended.

Skin protection:
None needed with normal use.
__________________________________________________________________________________________

9. PHYSICAL AND CHEMICAL PROPERTIES.

Physical state: Gold to light paste with slight odor of hydrocarbon
Flash point: >62掳C Method: PMCC-ASTM D 93-90
Specific gravity: 0.85 Vapor density (air=1): >1
Solubility in water: None pH: N/A
Boiling-melting point: >70潞C % VOC鈥檚 at 21掳C: 45 % max.
Vapor pressure at 21掳C: <2 mm Hg Evaporation rate: <1
__________________________________________________________________________________________

10. STABILITY AND REACTIVITY.

Stable under recommended storage and handling conditions. ( See section 7) May produce hazardous decomposition products
such as carbon dioxide, carbon monoxide and silicone oxides.
Store away from oxidizers and acids and avod extreme heat.
__________________________________________________________________________________________

11. TOXICOLOGICAL INFORMATION.

There is no data available on the preparation itself.
__________________________________________________________________________________________

12. ECOLOGICAL INFORMATION.

There is no data available on the preparation itself.
__________________________________________________________________________________________

13. DISPOSAL CONSIDERATIONS.

Do not allow into drains or water courses. Wastes and emptied containers should be handled according to local regulations.

May be contained in metal, plastic or glass.




M-08. -4-
__________________________________________________________________________________________

14. TRANSPORT INFORMATION.

Transport only in accordance with ADR for road, RID for rail and IMDG for sea.

ADR/RID: not regulated
IMDG : not regulated
__________________________________________________________________________________________

15. REGULATORY INFORMATION.

In accordance with 88/379/EEC the product is labelled as follows:

Danger classification: not regulated.
Contains: no specific substance need to be named on the label.

R phrases: no risk phrases.

S phrases: S-2: KEEP OUT OF REACH OF CHILDREN
__________________________________________________________________________________________

16. OTHER INFORMATION.

The information of this MSDS is based on the present state of our knowledge and on current EEC and national laws, as the
users鈥? working conditions are beyond our knowledge and control. The product is not to be used for other purposes than those
specified under section 1 without first obtaining hand written handling instruction. It is allways the responsibility of the user
to take all necessary steps in order to fulfil the demand laid down in local rules and legislation. The information in this
MSDS is meant as a description of the safety requirements of our product: it is not to be considered as a guarantee of the
products鈥? properties.

The information in this Safety Data Sheet is required pursuant to 91/155/EEC.

MATERIAL SAFETY DATA SHEET
According to directive EC.91/155 and EC. 93/112

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
034580-94-8.asp 034580-94-8
tapplastics_com_MSDS_DELRIN.asp N/A
100-42-5.asp 100-42-5 65997-17-3
100-42-5.asp 100-42-5 65997-17-3
65997-17-3.asp 65997-17-3
tapplastics_com_MSDS_ETI_CCRS.asp N/A
tapplastics_com_MSDS_GOOP_MFFH.asp N/A
tapplastics_com_MSDS_GOOP_SMR.asp N/A
tapplastics_com_MSDS_GOOP_SPH.asp N/A
tapplastics_com_MSDS_GOOP_SWH.asp N/A
tapplastics_com_MSDS_GOOP_SWR.asp N/A
78-93-3.asp 78-93-3
64742-14-9.asp 64742-14-9 64741-65-7 9005-90-7 64742-43-4 63148-62-9
64742-14-9.asp 64742-14-9 1317-95-9 56-81-5 64742-46-7
64742-14-9.asp 64742-14-9 56-81-5 64742-46-7 7631-86-9
tapplastics_com_MSDS_MYLAR.asp N/A
tapplastics_com_MSDS_PE2300.asp N/A
64742-89-8.asp 64742-89-8 110-54-3 108-88-3 78-93-3
36-24-1.asp 36-24-1 9002-88-4
7085-85-0.asp 7085-85-0 9011-14-7 12-31-9
7085-85-0.asp 7085-85-0 9011-14-7 12-31-9
8052-41-3.asp 8052-41-3
65997-17-3.asp 65997-17-3 9011-05-6 471-34-1 50-00-0
100-42-5.asp 100-42-5
67-64-1.asp 67-64-1
25085-99-8.asp 25085-99-8 112945-52-5 2461-15-6 106-89-8 1333-86-4 64742-47-8
029320-38-5.asp 029320-38-5 112-57-2 68082-29-1 68683-29-4 112945-52-5 100-51-6 13463-67-7 64742-47-8
tapplastics_com_MSDS_TAP_FM.asp N/A
64742-47-8.asp 64742-47-8 8002-74-2 64742-42-3 68609-21-2
25085-99-8.asp 25085-99-8 2461-15-6
68953-36-6.asp 68953-36-6
tapplastics_com_MSDS_TAP_IHSR.asp N/A
tapplastics_com_MSDS_TAP_KNYTEX.asp N/A
100-42-5.asp 100-42-5 136-52-7
tapplastics_com_MSDS_TAP_MGF.asp N/A
93763-70-3.asp 93763-70-3 14808-60-7
tapplastics_com_MSDS_TAP_MVER.asp N/A
7732-18-5.asp 7732-18-5 64-17-5 25213-24-5 71-36-3
tapplastics_com_MSDS_TAP_SRTVT.asp N/A
75-21-8.asp 75-21-8 75-56-9
tapplastics_com_MSDS_TAP_SV.asp N/A
tapplastics_com_MSDS_TAP_URTVSAB.asp N/A
tapplastics_com_MSDS_TAP_VISCO.asp N/A
65997-17-3.asp 65997-17-3
100-42-5.asp 100-42-5
tapplastics_com_MSDS_ULTRAGH.asp N/A
tapplastics_com_MSDS_ULTRAGR.asp N/A
tapplastics_com_MSDS_VINYL.asp N/A
101-20-2.asp 101-20-2
60676-86-0.asp 60676-86-0 64742-47-8 1336-21-6


HBCChem,Inc

Chemical Information Net chemcas.orgCopyright Reserved

Trading Lead

Leputech HPLC Laboratory