Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

1332-58-7
111-46-6
56-81-5

File Name: 1332-58-7.asp

                                                        CERAMCO
MATERIAL SAFETY DATA SHEET
CERAMCO庐 PRESS
Issued on September 26, 2005
========================================================================================
SECTION I - PRODUCT IDENTIFICATION
========================================================================================
PRODUCT NAME: Ceramco庐 Press Paste Opaque Porcelain
PRODUCT CODE: Paste Opaque: 801045, 801046, 801047, 801048, 801049, 801054, 801055, 801056,
801057, 801058, 801059, 801060, 801061, 801062, 801064, 801065, 801041, 801043.
Paste Opaque Modifier: 801070, 801071, 801072, 801073, 801074, 801075, 801076, 801077, 801078.
MANUFACTURER/SUPPLIER: Ceramco
Six Terri Lane
Burlington, NJ 08016
USA
Phone number: (800) 487-0100

========================================================================================
SECTION II - COMPOSITION/INFORMATION ON INGREDIENTS
========================================================================================
DESCRIPTION: Sodium/Potassium Aluminosilicate glass with opacifiers and pigments in an organic-based paste.
HAZARDOUS INGREDIENTS:
Component CAS No Weight % OSHA ACGIH HAZARDS
10 mg/m3
Aluminosilicate Glass 1332-58-7 60-70 - -
10 mg/m3
Diethylene Glycol 111-46-6 50-85 - -
10 mg/m3 -
Glycerine 56-81-5 5-17 -

========================================================================================
SECTION III - HAZARDS IDENTIFICATION
========================================================================================
NFPA HAZARD DESIGNATIONS: Health: 1 (Slight)
Flammability: 1 (Slight)
Reactivity: 0 (Minimal)
IMPORTANT HAZARD INFORMATION: Components may emit fumes under fire conditions

========================================================================================
SECTION IV - FIRST AID MEASURES
========================================================================================
GENERAL INFORMATION: Consult doctor in case of symptoms.
AFTER INHALATION: Remove to fresh air. If not breathing , give artificial respiration. If breathing is difficult,
give oxygen. Contact physician.
AFTER SKIN CONTACT: Wash skin with soap/water. Seek medical attention if condition persists.
AFTER EYE CONTACT: Immediately flush eyes with copious quantities of water for 15 minutes. Seek medical
attention if irritation or discomfort persists.
AFTER SWALLOWING: Wash out mouth with water. Call a physician.

========================================================================================
SECTION V- FIRE FIGHTING MEASURES
========================================================================================
FIRE EXTINGUISHING AGENTS: Dry chemical, carbon dioxide, alcohol or polymer foam.
SPECIAL PROTECTIVE EQUIPMENT: Wear self contained breathing apparatus and protective clothing to prevent contact
with eyes and skin.

========================================================================================
SECTION VI - ACCIDENTAL RELEASE MEASURES
========================================================================================
PERSON-RELATED SAFETY PRECAUTIONS: Avoid skin and eye contact and breathing vapors.
ENVIRONMENTAL PROTECTION: Avoid conditions which may result in dispersion to streams or water
ways.
MEASURES FOR CLEANING/COLLECTING: Scoop up and store in appropriate containers.
ADDITIONAL INFORMATION: Stable, inorganic compound in organic carrier, does not degrade,
Page 2 of 3
CERAMCO
MATERIAL SAFETY DATA SHEET
CERAMCO庐 PRESS PASTE OPAQUE PORCELAIN (continued)

partially evaporates.

========================================================================================
SECTION VII - HANDLING AND STORAGE
========================================================================================
INFORMATION FOR SAFE HANDLING: Avoid skin and eye contact and breathing vapors
PROTECTION AGAINST EXPLOSIONS/FIRES: Store away from ignition sources. Protect from high heat. Keep
containers closed when not in use.
STORAGE: Store away from ignition sources.
COMMON STORAGE FACILITIES: None

========================================================================================
SECTION VIII - EXPOSURE CONTROLS AND PERSONAL PROTECTION
========================================================================================
VENTILATION: General exhaust
EYE PROTECTION: Safety glasses are recommended. Eye wash station.
SKIN PROTECTION: Rubber or plastic gloves.
RESPIRATORY PROTECTION: None required for normal use of the product.

========================================================================================
SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
========================================================================================
PHYSICAL STATE: Solid/liquid
APPEARANCE: Finely divided powder in viscous carrier.
ODOR THRESHOLD: Not applicable
pH: Not applicable
MELTING POINT: Not applicable
FLASH POINT: Not determined
BOILING POINT: Not determined
FREEZING POINT: Not applicable
EVAPORATION RATE: Not applicable
SPECIFIC GRAVITY: 1.8-2.0 g/cc
SOLUBILITY/ MISCIBILITY Not applicable

========================================================================================
SECTION X - STABILITY AND REACTIVITY
========================================================================================
STABILITY: Stable, inorganic compound in organic carrier, does not degrade, partially evaporates.
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: None.
MATERIALS TO AVOID: Strong oxidizing or reducing agents.
DECOMPOSITION PRODUCTS: None known.

========================================================================================
SECTION XI - TOXICOLOGICAL INFORMATION
========================================================================================
SKIN CONTACT: Repeated or prolonged contact may cause reddening and irritation or drying of the
skin.
EYE CONTACT: May cause irritation upon contact.
INHALATION: None.
INGESTION: May be harmful.
SPECIAL TOXIC EFFECTS: None.

========================================================================================
SECTION XII - ECOLOGICAL INFORMATION
========================================================================================
Stable, inorganic compound in organic carrier, does not degrade, partially evaporates.
Page 3 of 3
CERAMCO
MATERIAL SAFETY DATA SHEET
CERAMCO庐 PRESS PASTE OPAQUE PORCELAIN (continued)


========================================================================================
SECTION XIII - DISPOSAL CONSIDERATION
========================================================================================
PRODUCT DISPOSAL: Dispose of in accordance with Federal, State and Local regulations for
relatively non-toxic inorganics
ADDITIONAL DISPOSAL INFORMATION: Avoid conditions which may result in dispersion to streams or waters.

========================================================================================
SECTION XIV - TRANSPORT INFORMATION
========================================================================================
UN/NA Code: Not Applicable
HAZARD CLASS: Not Applicable
PACKAGING GROUP: Not Applicable

========================================================================================
SECTION XV - REGULATORY INFORMATION
========================================================================================
This material is not regulated under CERCLA, SARA.

========================================================================================
SECTION XVI - OTHER INFORMATION
========================================================================================
INTERNATIONAL RISK PHRASES: 36/37
INTERNATIONAL SAFETY PHRASES: 20, 22, 25

These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features
and shall not establish a legally valid contractual relationship.

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
cdrecycler_com_BPliquidMsds.asp N/A
cedarlanelabs_com_MSDS_for_Sheep_Blood_Products.asp N/A
58880-19-6.asp 58880-19-6
celltechnology_com_msds.APFHPFOCl.asp N/A
67-68-5.asp 67-68-5
cemintel_com_au_CSR_Acrylic_based_compounds.asp N/A
20859-73-8.asp 20859-73-8
67-64-1.asp 67-64-1 78-93-3 000067-64-1
ceramco_com_ceramcopfzliner_modeling_stainliquidsmsds012104.asp N/A
110-54-3.asp 110-54-3
21651-19-4.asp 21651-19-4
111-46-6.asp 111-46-6
1332-58-7.asp 1332-58-7 111-46-6 56-81-5
7631-86-9.asp 7631-86-9 1344-28-1 12136-45-7 1313-59-3 1309-64-4 1305-78-8
7631-86-9.asp 7631-86-9 1344-28-1 12136-45-7 1313-59-3 18282-10-5 1306-38-3 107-88-0
ceramco_com_neytech_msds_pressableinvestmentliquid.asp N/A
ceramco_com_pfzmarginliquidmsds021904.asp N/A
67-63-0.asp 67-63-0 64-17-5 57-55-6
cfesa_com_1942_2ht.asp N/A
cfesa_com_222_threadlocker.asp N/A
25852-47-5.asp 25852-47-5 9004-96-0 81-07-2 80-15-9 57-55-6 112945-52-5 613-48-9 13463-67-7
cfesa_com_567_thread_sealant.asp N/A
cfesa_com_abs_cement.asp N/A
74-86-2.asp 74-86-2 67-64-1
cfesa_com_acetylene_2.asp N/A
cfesa_com_acetylene.asp N/A
cfesa_com_acrylic_enamels.asp N/A
cfesa_com_add_topcoats.asp N/A
64742-57-0.asp 64742-57-0 1302-78-9 68910-93-0
79-01-6.asp 79-01-6
1313-13-9.asp 1313-13-9 7439-89-6 7440-66-6 1310-58-3 7782-42-5 7727-43-7 03-01-2
cfesa_com_alkifoam.asp N/A
cfesa_com_anchor_paint.asp N/A
cfesa_com_aos_silicone.asp N/A
cfesa_com_aqua_mate.asp N/A
cfesa_com_aqua_solv.asp N/A
32-16-4.asp 32-16-4 77-92-9
cfesa_com_argon_LAR.asp N/A
7440-37-1.asp 7440-37-1
1314-13-2.asp 1314-13-2 9003-29-6
cfesa_com_bearing_mount.asp N/A
cfesa_com_BelRay.asp N/A
cfesa_com_BFW5.asp N/A
124-38-9.asp 124-38-9 79-01-6
cfesa_com_BTI.asp N/A
cfesa_com_buckeye_xl.asp N/A
7732-18-5.asp 7732-18-5 68584-27-0 29911-28-2 1300-72-7 64-02-8
cfesa_com_buffered.asp N/A
cfesa_com_capella_oil.asp N/A
cfesa_com_carbon_clean.asp N/A


HBCChem,Inc

Chemical Information Net chemcas.orgCopyright Reserved

Trading Lead

Leputech HPLC Laboratory