INSPEC
FIBRES
Material Safety Data Sheet
according 91/155/EWG
(amended by 2001/58/EC)
PPS fiber PROCON
Trade name:
Product code: --
MSDS 3.4.13 PPS Fiber PROCON
File:
Revised: 22.08.2005
1. Identification of the substance/preparation and of the company/undertaking
PPS Fiber PROCON
1.1. Identification of the substance or
preparation
Fibers for textile fabrics
1.2. Use of the substance/preparation
Inspec Fibres GmbH, A-4860 Lenzing / Austria / Europe
1.3. Company/undertaking identification
Tel.: +43 7672 701 2891, Fax: +43 7672 92046
Web: www.p84.com
Information provided by: Inspec Fibres GmbH / Product-Stewardship
Tel.: +43 7672 701 3274, Fax: +43 7672 92046 3274
E-Mail: jens.guldt@degussa.com
Emergency telephone: Tel.: +43 7672 701 2500 (Fire brigade of Lenzing AG)
2. Composition/information on ingredients
Chemical characterization: Polyphenylensulfide
Dangerous ingredients: Substances classified as hazardous are less than 1 %
Concentration: No data
3. Hazard Identification
Hazard description: Not classified as hazardous under EC directives for the classification,
packaging and labelling of dangerous substances or preparations.
Critical hazards to man and environment: None
4. First Aid Measures
General advice: None
After skin contact: Wash skin with water and soap.
After contact with eyes: Irrigate eye with open lids with water. Get medical attention.
After inhalation: Keep patient calm, remove to fresh air, get medical attention.
After ingestion: PROCON-Fiber is not expected as harmful. Rinse mouth and then drink
plenty of water.
Note to physician: None
5. Fire-Fighting Measures
Suitable extinguishing media: Water spray, foam, dry extinguishing media
Extinguishing media which must be used No data
for safety reasons:
Special exposure hazards: Sulfur dioxide
Special protective equipment: Wear self-containing breathing apparatus and protective clothing at a
large scale fire.
Additional information: None
6. Accidental Release Measures
Person precautions such as: Few adverse human health effects are anticipated.
Environmental protections such as: None
Methods for cleaning up such as: Sweep up or use vacuum cleaner
MSDS 3.4.13 PPS Fiber PROCON Page 1(5)
INSPEC
FIBRES
Material Safety Data Sheet
according 91/155/EWG
(amended by 2001/58/EC)
PPS fiber PROCON
Trade name:
Product code: --
MSDS 3.4.13 PPS Fiber PROCON
File:
Revised: 22.08.2005
Additional information: None
7. Handling and Storage
7.1. Handling
Information for safe handling: Good ventilation is needed at work area. If dust exposure causes eye
discomfort, use chemical goggles.
Information about protection against fire Not required.
and explosion:
7.2. Storage
Requirements to be met by storerooms Keep fibres dry and shaded.
and receptacles:
Information about storage in a common None
storage facility:
Further information about storage To maintain the original fiber color, store in light-proof package
conditions:
None
7.3. Specific use(s)
8. Exposure Controls and Personal Protection
None
8.1. Exposure limit values
Good ventilation should be sufficient for most conditions. Local exhaust
8.1. Exposure controls
(Additional information about design of ventilation may be necessary for some operations.
technical systems)
Occupational exposure controls
(Personal protective equipment)
Respiratory protection Avoid breathing in fibre dust. Wear dust mask if necessary
Skin protection Wear protective gloves in case of irritation of skin.
Eye protection: Wear protective glasses if necessary.
Protective clothing: Use working cloth.
No data available
Environmental exposure controls
9. Physical and Chemical Properties
9.1. Appearance
Form: White long fibers
Odour: odourless
9.2. Data, relevant to safety
pH-value: Not applicable
Melting point: 285掳C
Boiling point: Not applicable
Flashpoint: 480掳C and above
Flammability (solid, gas): No data available
Explosive properties: Not applicable
Ignition Temperature: Not applicable
Decomposition Temperature: 470掳C and above
Oxidising Properties: None
Vapour pressure: Not applicable
MSDS 3.4.13 PPS Fiber PROCON Page 2(5)
INSPEC
FIBRES
Material Safety Data Sheet
according 91/155/EWG
(amended by 2001/58/EC)
PPS fiber PROCON
Trade name:
Product code: --
MSDS 3.4.13 PPS Fiber PROCON
File:
Revised: 22.08.2005
Density: 1,34 g/cm鲁
Solubility in water ( at 20掳C): Insoluble
Fat solubility (oil to be specified): No data determined
Partition coefficient: n-octanol/water: Not applicable
Viscosity: Not applicable
Vapour density: Not applicable
Evaporation rate: Not applicable
9.3. Other information
Auto Ignition Temperature: No data available
10. Stability and Reactivity
None
10.1. Conditions to avoid:
Strong oxidizers, strong sulfuric acid and nitric acid
10.2. Materials to avoid:
None
10.3. Hazardous products of decomposition:
Additional information: None
11.Toxicological Information
11.1. Toxicological tests
Acute oral toxicity, LD 50: No data available
Acute dermal toxicity, LD 50: No data available
Acute inhalatorial toxicity, LC 50: No data available
Irritant effects on skin: No data determined
Irritant effects on eyes: No data determined
Irritant effects after inhalation: Fibrils could be inhaled and may cause respiratory irritation.
Sensitization: No data available
Chronic toxicity: No data determined
Carcinogenicity, Mutagenicity or No data determined
Teratogenicity:
Additional information: Subchronic Effects: Data on other types of fibers suggest that repeated
excessive inhalation exposures to airborne fibrils may cause respiratory
irritation and lung effects / injury.
11.2. Experience in humans
Observations relevant to Classification: No data available
Further observations: None
None
11.3. Additional information
12. Ecological Information
Not applicable
12.1. Ecotoxicity
Aquatic toxicity
Fish:
Daphnae:
Algae:
Effect on Effluent Treatment Not applicable
MSDS 3.4.13 PPS Fiber PROCON Page 3(5)
INSPEC
FIBRES
Material Safety Data Sheet
according 91/155/EWG
(amended by 2001/58/EC)
PPS fiber PROCON
Trade name:
Product code: --
MSDS 3.4.13 PPS Fiber PROCON
File:
Revised: 22.08.2005
Unlikely to move in environment
12.2. Mobility
Mobility in soil: No data applicable
Persists for a long time in the environment
12.3. Persistence and degradability
Abiotic degradation No data applicable
Biological degradation: No data applicable
Unlikely to occur
12.4. Bioaccumulation potential
Additional information: None
None
12.5. Other adverse effects
12.6. Further ecological information
Chemical Oxygen Demand (COD): No data available
Biological Oxygen Demand (BOD5): No data available
AOX advice: No data available
Additional information: None
13. Disposal Considerations
Product: Disposal in compliance with all applicable local and national laws and
regulations.
Packaging material: Dispose in the same way as the material.
Additional information: None
14. Transport Information
Land transport (ADR/RID/DOT)
Class:
Packing group:
UN-Number:
Designation of goods:
Not classified as hazardous under transport regulations.
Remarks:
Maritime transport (IMDG)
Class:
Packing group:
UN-Number:
Marine pollutant:
Exact technical name:
Not classified as hazardous under transport regulations.
Remarks:
Air transport (ICAO/IATA)
Class:
Packing group:
UN-Number:
Exact technical name:
Not classified as hazardous under transport regulations.
Remarks:
Further information
Dispatch by post: No restriction
MSDS 3.4.13 PPS Fiber PROCON Page 4(5)
INSPEC
FIBRES
Material Safety Data Sheet
according 91/155/EWG
(amended by 2001/58/EC)
PPS fiber PROCON
Trade name:
Product code: --
MSDS 3.4.13 PPS Fiber PROCON
File:
Revised: 22.08.2005
15. Regulatory Information
15.1. Markings according to EC directives
Hazard-determining component: None
INDEX-Number: None
Hazard symbols Not required
Risk phrases (R-phrases): None
Safety phrases (S-phrases): None
see Point 16.
15.2. National regulations
Flammable Liquids Classification (VdF) Not applicable
Water Hazard Class: None
16. Other information
Data originate from Material Safety Data Sheet No. 00015F of Toyobo
Co., Ltd, July 19, 2005.
The information containing herein is believed to be correct as to the date
hereof. However, no warranty is made, either expressed or implied,
regarding its accuracy, properties and characteristics.
The responsibility for the compliance with the existing laws and
regulations lies with the receiver of the product.
A line ( | ) in the left hand margin indicates an amendment to the previous
version.
MSDS 3.4.13 PPS Fiber PROCON Page 5(5)
|