MATERIAL SAFETY DATA SHEET
EPOXY SYSTEMS' PRODUCT #402 URETHANE TOPCOAT PART A
PRODUCT NAME: EPOXYSYSTEMS' PRODUCT # 402 URETHANE TOPCOAT PART A HMIS CODES: H F RP
PRODUCT CODE: 23 0 --
SECTION 1: MANUFACTURER IDENTIFICATION
MANUFACTURER'S NAME: Epoxy Systems, Inc.
ADDRESS: 9370SW208th Cir
Dunnellon,FL34431
EMERGENCY NUMBER: 1-800-633-8253 DATE PRINTED: 07/03
INFORMATION NUMBER: 1-352-489-1666 NAME OF PREPARER: N. Lambert
SECTION 2: HAZARDOUS INGREDIENTS/SARA III INFORMATION
HAZARDOUS COMPONENTS CAS NUMBER OSHA PEL ACGIH TLV WT % VAPOR PRESS.
N-Butyl Acetate 123-86-4 150 ppm 150 ppm 34-36 8.4mm Hg @ 68 deg. F
Glycol Ether PM Acetate 108-65-6 NE NE 18-20 3.7mm Hg @ 68 deg. F
Polyester Resins Mixture NE NE 40-42 NE
Xylene* 1330-20-7 100 ppm 100 ppm 2-3 5.1mm Hg @ 68 deg. F
* Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
SECTION 3: PHYSICAL/CHEMICAL CHARACTERISTICS
: 280掳 F
BOILING RANGE
: Heavier than air
VAPOR DENSITY
: No
SOLUBILITY IN WATER
: Clear Liquid with solvent odor
APPEARANCE AND ODOR
: 8.5 lbs. (卤 0.25)
WEIGHT PER GALLON
: Slower than ether
EVAPORATION RATE
: 66%
PERCENT VOC BY VOLUME
SECTION 4: FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: 81掳 F
METHOD USED: TCC
FLAMMABLE LIMITS IN AIR BY VOLUME - LOWER: 1.0
UPPER:
EXTINGUISHING MEDIA: Foam, Alcohol Foam, CO2, Dry Chemical
OSHA FLAMMABILITY CLASSIFICATION: Flammable Liquid IC
SPECIAL FIRE FIGHTING PROCEDURES: Wear NIOSH/MSHA approved self contained breathing apparatus and full
protective clothing. Use water to keep fire exposed containers cool. Water may be ineffective as an extinguishing
agent.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors are heavier than air and may travel along the ground or be
moved by ventilation to ignition sources at locations distant from material handling point. Pressure may build up in
containers and create an explosion hazard.
SECTION 5: REACTIVITY DATA
STABILITY: Stable
CONDITIONS TO AVOID: All sources of ignition.
INCOMPATIBILITY (MATERIALS TO AVOID): Oxidizing agents, strong acids & bases
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Carbon monoxide, carbon dioxide, nitrogen oxides and organic
compounds.
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION 6: HEALTH HAZARD DATA
HEALTH RISKS AND SYMPTOMS OF OVEREXPOSURE:
EYES: Irritation, burning, tearing, and redness.
SKIN: Moderate irritation or defatting of skin upon prolonged or repeated contact.
INGESTION: Abdominal pain, nausea, vomiting and diarrhea.
INHALATION: Excessive exposure to vapors can cause headache, dizziness, uncoordination, nausea, and loss of
consciousness.
EMERGENCY AND FIRST AID PROCEDURES:
EYES: Flush with cool water for at least 15 minutes. Call a physician.
SKIN: Remove contaminated clothing, wash skin with soap and water. Launder contaminated clohing before
reuse.
INGESTION: Do Not Induce Vomiting. Get medical attention immediately.
INHALATION: Remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.
Call a physician.
CARCINOGENICITY: NTP CARCINOGEN: No IARC MONOGRAPHS: No OSHA REGULATED: No
SECTION 7: PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Dike spill area. Soak up with absorbent
material and place in sealed metal containers for proper disposal.
WASTE DISPOSAL METHOD: Dispose of in accordance with local, state and federal EPA regulations.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in dry area. Keep away from open flames and
high temperatures.
OTHER PRECAUTIONS: Minimize contact. Avoid breathing vapors. Practice good industrial hygiene and safe
working practices.
SECTION 8: CONTROL MEASURES
RESPIRATORY PROTECTION: Use NIOSH approved dust mask respirator under appropriate OSHA standards and
regulations. A combination of both proper ventilation and respiratory protection would tend to eliminate most risks.
VENTILATION: Local exhaust is recommended.
PROTECTIVE GLOVES: Recommended
EYE PROTECTION: Wear liquid chemical goggles. Contact lenses should not be worn.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Eye wash facility and safety shower recommended. Long sleeve
shirts and pants.
WORK/HYGIENIC PRACTICES: Wash hands with soap and water after using and before eating.
SECTION 9: REGULATORY INFORMATION
D. O. T. PROPER SHIPPING NAME: Resin Solution, Flammable; 3; UN1866; PG III
PROPER SHIPPING NAME: Resin Solution, flammable
HAZARD CLASS: Class 3, Flammable Liquid
UN/NA ID NUMBER: UN 1866
PACKING GROUP III
SECTION 10: DISCLAIMER
Data and recommendations presented herein are based upon our and other researchers and are believed to be accurate.
The products discussed are distributed without warranty (expressed or implied) and the customer shall make his own
determination of suitability for his particular purpose.
MATERIAL SAFETY DATA SHEET
EPOXY SYSTEMS' PRODUCT #402 URETHANE TOPCOAT PART B
PRODUCT NAME: EPOXYSYSTEMS' PRODUCT #401 URETHANE TOPCOAT PART B HMIS CODES: H F RP
PRODUCT CODE: 33 1 --
SECTION 1: MANUFACTURER IDENTIFICATION
MANUFACTURER'S NAME: EPOXY SYSTEMS, INC.
ADDRESS: 9370SW208thCir
Dunnellon,FL34431
EMERGENCY NUMBER: 1-800-633-8253 DATE PRINTED: 07/03
INFORMATION NUMBER: 1-352-489-1666 NAME OF PREPARER: N. LAMBERT
SECTION 2: HAZARDOUS INGREDIENTS/SARA III INFORMATION
HAZARDOUS COMPONENTS CAS NUMBER OSHA PEL ACGIH TLV WT % VAPOR PRESS.
N-Butyl Acetate 123-86-4 150 ppm 150 ppm 15 8.4mm Hg @ 68 deg. F
Xylene* 1330-20-7 100 ppm 100 ppm 3-5 5.1mm Hg @ 68 deg. F
0.5 mg/m3 (TWA)
Isocyanate Oligomer Mixture 70-75 NE
1.0 mg/m3 (STEL)
* Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
SECTION 3: PHYSICAL/CHEMICAL CHARACTERISTICS
: 300掳 F
BOILING RANGE
: Heavier than air
VAPOR DENSITY
: No
SOLUBILITY IN WATER
: Clear to amber liquid, mild aromatic odor
APPEARANCE AND ODOR
: 8.8 lbs (卤 0.25)
WEIGHT PER GALLON
: Slower than ether
EVAPORATION RATE
: 30%
PERCENT VOC BY VOLUME
SECTION 4: FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: 80掳 F
METHOD USED: TCC
FLAMMABLE LIMITS IN AIR BY VOLUME - LOWER: 1.0
UPPER:
EXTINGUISHING MEDIA: Foam, alcohol foam, CO2, dry chemical
OSHA FLAMMABILITY CLASSIFICATION: Flammable Liquid IC
SPECIAL FIRE FIGHTING PROCEDURES: Wear NIOSH/MSHA approved self contained breathing apparatus and full
protective clothing. Use water to keep fire exposed containers cool. Water may be ineffective as extinguishing
agent.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors are heavier than air and may travel along the ground or be
moved by ventilation to egnition sources at locations distant from material handling point. Pressure may build up in
containers and creae explosion hazard.
SECTION 5: REACTIVITY DATA
STABILITY: Stable
CONDITIONS TO AVOID: All sources of ignition.
INCOMPATIBILITY (MATERIALS TO AVOID): Oxidizing agents, strong acids & bases.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Carbon monoxide, carbon dioxide, nitrogen oxides, and organic
compounds.
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION 6: HEALTH HAZARD DATA
HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
EYES: Irritation, burning, tearing, and redness.
SKIN: Moderate irritation or defatting of skin upon prolonged or repeated contact.
INGESTION: Abdominal pain, nausea, vomiting, and diarrea.
INHALATION: Excessive exposure to vapors can cause headaache, dizziness, uncoordination, nausea, and loss of
consciousness.
CARCINOGENICITY: NTP CARCINOGEN: No IARC MONOGRAPHS: No OSHA REGULATED: No
EMERGENCY AND FIRST AID PROCEDURES:
EYES: Flush with cool water for at least 15 minutes. Call a physician.
SKIN: Remove contaminated clothing, wash skin with soap and water.
INGESTION: Do not induce vomiting. Get medical attention immediately.
INHALATION: Move to fresh air. Aid breathing if necessary. Call a physician.
SECTION 7: PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Dike spill area. Absorb with inert absorbant
material. Place in sealed containers for proper disposal.
WASTE DISPOSAL METHOD: Dispose of in accordance with local, state and federal EPA regulations.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in dry area. Keep away from open flames and
high temperatures.
OTHER PRECAUTIONS: Minimize contact. Avoid breathing vapors. Practice good industrial hygiene and safe working
practices.
SECTION 8: CONTROL MEASURES
RESPIRATORY PROTECTION: Use NIOSH approved dust mask respirator under appropriate OSHA standards and
regulations. A combination of both proper ventilation and respiratory protection would tend to eliminate most risks.
VENTILATION: Local exhaust is recommended.
PROTECTIVE GLOVES: Recommended.
EYE PROTECTION: Wear liquid chemical goggles. Contact lenses should not be worn.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Eye wash facility and safety shower recommended. Long sleeve
shirts and pants.
WORK/HYGIENIC PRACTICES: Wash hands with soap and water after using and before eating.
SECTION 9: REGULATORY INFORMATION
D. O. T. PROPER SHIPPING NAME: Resin Solution, Flammable; 3; UN1866; PG III
PROPER SHIPPING NAME: Resin Solution, flammable
HAZARD CLASS: Class 3, Flammable Liquid
UN/NA ID NUMBER: UN 1866
PACKING GROUP III
SECTION 10: DISCLAIMER
Data and recommendations presented herein are based upon our and other researchers and are believed to be accurate.
The products discussed are distributed without warranty (expressed or implied) and the customer shall make his own
determination of suitability for his particular purpose.
|