Epoxy Systems, Inc.
Material Safety Data Sheet
OSHA's Hazard Communication Standard,
29 CFR 1910.1200.
IDENTITY: EPOXYSYSTEMS鈥? PRODUCT #26 鈥淎鈥? Component
SECTION I
Manufacturer: Epoxy Systems, Inc. Emergency Number:1-800-633-8253 (PERS)
Address: 9370 SW 208th Circle Telephone Number: 352-489-1666
Dunnellon, FL 34431 Date Prepared: 1/2004
SECTION II 鈥? HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous
Components CAS # OSHA PEL ACHIH TLV Hazard Limit %
Epoxy Resin 025085-99-8 N/E
Epoxy Resin 28064-14-4 N/E
NOTE: It is very unlikely that normal work operations could produce concentrations that are harmful to humans.
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: N/A Specific Gravity (H20 =1): 1.15
Vapor Pressure (mm Hg.): N/A Melting Point: N/A
Vapor Density (AIR = 1): N/A Evaporation Rate: N/A
Solubility in Water: Slight (Butyl Acetate = 1)
Appearance and Odor: Yellowish liquid, mild odor
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): 480掳F PMCC Flammable Limits: LEL N/D UEL N/D
Extinguishing Media: Foam,CO2, dry chemical
Special Fire Fighting Procedures: Wear positive pressure, self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: None
SECTION V - REACTIVITY DATA
Stability: Stable Conditions to Avoid: None
Incompatibility: Base
Hazardous Decomposition or Byproducts: Carbon Monoxide, Carbon Dioxide
Hazardous Polymerization: Will Not Occur Conditions to Avoid: None known
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation: No Skin: Yes Ingestion: Yes
Health Hazards (Acute and Chronic): May cause eye irritation. Can cause allergic skin response. No hazards
anticipated from ingestion incidental to industrial exposure.
Carcinogenicity: NTP: Not Listed IARC Monographs: Not Listed OSHA Regulated: Not Regulated
Signs and Symptoms of Exposure: Skin or eye irritation or sensitization
Medical Conditions Generally Aggravated by Exposure: None known
Emergency and First Aid Procedures: Eyes: Flush with water for at least 15 minutes. Skin: Wash thoroughly
with soap and water.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled: Soak up in absorbent material, such as sand, and
collect in suitable containers.
Waste Disposal Method: Burn in adequate incinerator or bury in approved landfill in accordance with Federal,
State and local regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed. Store in cool area
Other Precautions: Keep Containers closed. Store in cool area.
SECTION VIII - CONTROL MEASURES
Respiratory Protection: None normally needed.
Ventilation: Mechanical (General) Good general ventilation.
Protective Gloves: Rubber Gloves Eye Protection: Safety Glasses
Other Protective Clothing or Equipment: Clean work clothes
Work/Hygienic Practices: Follow practices of good industrial hygiene.
N/A = Not Applicable N/D = Not Determined N/E = Not Established
Epoxy Systems, Inc.
Material Safety Data Sheet
OSHA's Hazard Communication Standard,
29 CFR 1910.1200.
IDENTITY: EPOXYSYSTEMS鈥? PRODUCT #26鈥淏鈥? Component
SECTION I
Manufacturer: Epoxy Systems, Inc. Emergency Number:1-800-633-8253 (PERS)
Address: 9370 SW 208th Circle Telephone Number: 352-489-1666
Dunnellon, FL 34431 Date Prepared: 1/04
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous
Components CAS # OSHA PEL ACHIH TLV Hazard Limits %
Polyamide Resin (Mixture) N/E
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: Unknown Specific Gravity (H20 =1): .97
Vapor Pressure (mm Hg.): <1 mmHg Melting Point: N/A
Vapor Density (AIR = 1): 6.53 Evaporation Rate: N/D
Solubility in Water: Slight (Butyl Acetate = 1)
Appearance and Odor: Dark liquid, amine odor
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): 265掳F PMCC
Flammable Limits: LEL N/E UEL N/E
Extinguishing Media: Water fog, CO2, dry chemical
Special Fire Fighting Procedures: Use a positive pressure self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: None
SECTION V - REACTIVITY DATA
Stability: Stable Conditions to Avoid: None
Incompatibility: Acids and bases
Hazardous Decomposition or Byproducts: Nitrogen oxides when burned
Hazardous Polymerization: Will Not Occur Conditions to Avoid: None known
(OVER)
EPOXYSYSTEMS鈥? PRODUCT #26鈥淏鈥? Component -continued
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation: Yes Skin: Yes Ingestion: No
Health Hazards (Acute and Chronic): May cause severe injury to skin following prolonged or repeated contact.
May cause allergic responses. Ingestion may cause burns of throat and mouth
Carcinogenicity: NTP: Not Listed IARC Monographs: Not Listed OSHA Regulated: Not Regulated
Signs and Symptoms of Exposure: Eye irritation, skin irritation
Medical Conditions Generally Aggravated by Exposure: Skin irritation
Emergency and First Aid Procedures: Eyes: Flush immediately with copious amounts of water for at least 15
minutes. Skin: Wash thoroughly with soap and water. Ingestion: Do not induce vomiting.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled: Contain spill. Broadcast absorbent material. Collect
in suitable containers.
Waste Disposal Method: Incinerate in accordance with Federal, State and local regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed. Store in cool area.
Other Precautions: Avoid breathing vapors
SECTION VIII - CONTROL MEASURES
Respiratory Protection: NIOSH approved organic respirators in enclosed areas
Ventilation: Mechanical (General) Good general ventilation
Protective Gloves: Rubber gloves Eye Protection: Safety Glasses
Other Protective Clothing or Equipment: Long sleeved shirt, long pant clothing
Work/Hygienic Practices: Follow practices of good industrial hygiene.
N/A = Not Applicable N/D = Not Determined N/E = Not Established
Epoxy Systems, Inc.
Material Safety Data Sheet
OSHA's Hazard Communication Standard,
29 CFR 1910.1200.
IDENTITY: EPOXYSYSTEMS鈥? PRODUCT #26鈥淐鈥? Component
SECTION I
Manufacturer: Epoxy Systems, Inc. Emergency Number: 1-800-633-8253 (PERS)
Address: 9370 SW 208th Cir. Telephone Number: 352-489-1666
Dunnellon, FL 34431 Date Prepared: 1/2004
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous
Components CAS # OSHA PEL ACHIH TLV Hazard Limits %
.1 mg/m3
Silica Sand 14808-60-7
10mg/m3
Titanium Dioxide 13463-67-7
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: N/A Specific Gravity (H20 =1): 2.20
Vapor Pressure (mm Hg.): N/A Melting Point: N/A
Vapor Density (AIR = 1): N/A Evaporation Rate: N/A
Solubility in Water: 100% (Butyl Acetate = 1)
Appearance and Odor: Gray powder
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): N/A Flammable Limits: LEL N/A UEL N/A
Extinguishing Media: N/A
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: N/A
SECTION V - REACTIVITY DATA
Stability: Stable Conditions to Avoid: None
Incompatibility: Silica will dissolve in Hydro Fluoric Acid and produce gas.
Hazardous Decomposition or Byproducts: N/A
Hazardous Polymerization: Will Not Occur Conditions to Avoid: None known
(over)
EPOXYSYSTEMS鈥? PRODUCT #26鈥淐鈥? Component 鈥? continued
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation: Yes Skin: No Ingestion: No
Health Hazards (Acute and Chronic): Gross inhalation may cause respiratory difficulty.
Carcinogenicity:
NTP? Yes (Crystalline Silica) IARC Monographs: Yes 2A Grouping OSHA Regulated: Not Regulated
Signs and Symptoms of Exposure: Skin irritation and mucous membrane irritation
Medical Conditions Generally Aggravated by Exposure: Freshly mixed concrete grout or mortar may cause skin
injury. Avoid contact with skin and wash exposed areas promptly with water.
Emergency and First Aid Procedures: If powder gets into eyes, rinse immediately and repeatedly with water and
get prompt medical attention.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled: Scoop up for disposal.
Waste Disposal Method: Burn in approved landfill in accordance with Federal, State and Local regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed. Protect from moisture.
Other Precautions: Avoid breathing dust.
SECTION VIII - CONTROL MEASURES
Respiratory Protection: NIOSH approved dust respirator. See ANSI Z.88.2
Local Exhaust : To meet PEL Special: N/A
Ventilation: Mechanical(General) To meet PEL Other: To meet PEL requirements
Protective Gloves: Rubber gloves Eye Protection: Safety Glasses
Other Protective Clothing or Equipment: Long sleeved, long pant clothing
Work/Hygienic Practices: Follow practices of good industrial hygiene.
N/A = Not Applicable N/D = Not Determined N/E = Not Established
|