MATERIAL SAFETY DATA SHEET
Page 1 of 4
FT620 is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based
products. FT620 has superb chemical resistance, abrasion resistance and substrate penetration.
I. IDENTIFICATION
Manufacturer Phone: 1.800.831.5600
Trade Name: FT 620 Water Based Epoxy
Product Name: Clear water based epoxy
DOT Shipping Name:
HMIS Codes: H=2* F=1 R=O P=G
Emergency Phone:
II. HAZARDOUS INGREDIENTS
INGREDIENTS: CAS # OSHA PEL ACGIH TLV OSHA STEL VAPOR PRESSURE WEIGHT
mm Hg @ Temp. PERCENT
1,2 ETHANE DIAMINE, N- 111-40-0 1 p.p.m. 1 p.p.m. None 0.0 @ 68癋
(2-AMINO ETHYL)
TETRAETHYLENE PEN- 112-57-2 None None None NA
TAMINE
ETHYLENEDIAMINE 107-15-3 10 p.p.m. 10 p.p.m. 10 p.p.m. 10.7 @ 68癋
PENTAETHYLENE 4067-16-7 None None None NA
HEXAMINE
WATER 7732-18-5 None None None NA
PROPYLENE GLYCOL 107-98-2 100 p.p.m. 100 p.p.m. 150 p.p.m. 10.9 @ 77癋
MONOMETHYL ETHER
GLACIAL ACITIC ACID 64-19-7 10 p.p.m. 10 p.p.m. 15 p.p.m. 11.0 @ 68癋
STODDARD SOLVENT 8052-41-3 100 p.p.m. 100 p.p.m. None 2.0 @ 68癋
2 ETHYL 1 HEXANOL 104-76-7 None None None 10.0 @ 68癋
*GLYCOL ETHER 2- 111-76-2 25 p.p.m. 25 p.p.m. None 10.0 @ 97癋 <0.5%
BUTOXYETHANOL
PROPRIETARY ADDITIVE 5170 None None None NA
1,2-PROPANEDIOL 57-55-6 None None None 1.0 @ 113癋
1-METHOXY-2-PROPANOL 107-98-2 100 p.p.m. 100 p.p.m. 150 p.p.m. 1.0 @ 550癋
1-METHOXY-2-PROPANOL 108-65-6 None None None NA
ACETATE
* Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
PROPYLENE GLYCOL MONOMETHYL ETHER CAS # 107-98-2 (ACGIH) STEL=150 p.p.m.
Follow 311b (2)(A) 4 CFR 116, 117, guidelines. Follow TSCA 8(a) 40 CFR 712, 47 FR 26992 guidelines.
III. PHYSICAL DATA
Boiling Point: 212癋
Vapor Density: NA
Specific Gravity: 1.0
Material Safety Data Sheet Page 2 of 4
(Continued from page 1)
Solubility in Water: Emulsifiable
Evaporation Rate: NA
Appearance and Odor: Low viscosity liquid, amber/clear.
IV. FIRE AND EXPLOSION HAZARD DATA
Flash Point TCC/PM: 200?F+
L/ U Explosive Limit: NA
Extinguishing Media: In case of fire, use foam, alcohol foam, water fog, or carbon dioxide.
UNUSUAL FIRE AND EXPLOSION HAZARDS INCLUDE: None known. Toxic fumes will be involved in a fire. A self-contained breathing appa-
ratus should be available for fire fighters. Water may be used to cool containers exposed to extreme heat.
V. HEALTH AND SAFETY
Threshold Limit Value: Not required for mixture
Effects of Over Exposure:
Immediate (Acute) Effects:
Eyes/ Skin: Irritation to the skin can occur but dermal absorption toxicity is low. This material can cause eye irritation or red-
ness.
Ingestion: Can cause nausea or other similar responses.
Inhalation: High concentrations of vapor can cause irritation to the respiratory tract, nausea and dizziness
Carcinogenicity: NTP: No. IARC monographs: No. OSHA regulated: No.
Chronic Exposure: Prolonged or repeated exposure may cause asthma and skin sensitization or other allergic responses.
Medical conditions generally aggravated by exposure--respiratory conditions or allergic ailments
Emergency And First
Aid Procedures:
Skin: Flush with large amounts of water for at least fifteen minutes and remove all contaminated clothing immediately.
Get medical attention if reddening or swelling occurs.
Eyes: Flush with plenty of water for at least fifteen minutes, lifting upper and lower lids. Get medical attention.
Inhalation: Remove to fresh air if effects persist and administer oxygen if necessary.
Ingestion: DO NOT INDUCE VOMITING. Give large amounts of water or if available, milk. Never give anything by mouth to
an unconscious person. Call a physician immediately.
Possible Routes of Entry: Inhalation, ingestion, skin absorption
Carcinogenicity: NTP: No. IARC Monographs: No. OSHA regulated: No.
VI. REACTIVITY DATA
Conditions To Avoid: Open flames and all sources of ignition and sparks
Hazardous Decomposition
Products: Carbon dioxide, carbon monoxide and nitrogen oxides.
Hazardous Polymerization: Will not occur
Incompatibility: Avoid contact with open flames and all sources of ignitions and/or sparks.
Stability: Stable.
VII. SPILL OR LEAK PROCEDURES
Avoid contact with material. Wear the appropriate safety equipment. Stop spill at source, dyke area to prevent spreading. Pump liquid to sal-
vage tank. Take up remainder with clay or other absorbent and place in disposal containers.
Dispose in accordance with local, State and Federal regulations or with a licensed waste disposal company.
VIII. SAFE HANDLING AND USE INFORMATION
Respiratory Protection: NIOSH approved respirator protection required in the absence of proper environmental controls.
Ventilation: General exhaust is usually sufficient to control vapors and exposure hazards.
Protective Clothing: Avoid all skin contact. Impervious gloves, neoprene or rubber, Splash goggles or glasses with side shields, wear
body covering clothing and other coverings as necessary such as apron and appropriate footwear to avoid contact
with material. Observe good hygienic practices.
It is generally recognized that contact lenses should not be worn when working with chemicals because contact lenses may contribute to the
severity of and eye injury in case of exposure.
IX. SPECIAL PRECAUTIONS
Precautions to be taken in handling and storing: Keep away from heat, sparks and open flames. Keep container closed when not in use. Do not
store above 120?Containers may contain product residue including flammable or explosive vapors.
F.
SAFETY STATEMENT
The information presented is believed to be accurate, but is not warranted to be whether originating from manufacturer or not. Recipients are
advised to confirm in advance, that the information is current, applicable, and relative to their individual circumstance.
Version Date: 10/25/02
Material Safety Data Sheet Page 3 of 4
FT620 is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based
products. FT620 has superb chemical resistance, abrasion resistance and substrate penetration.
I. IDENTIFICATION
Manufacturer Phone: 1.800.831.5600
Trade Name: FT620 Water Based Epoxy
Product Type:
DOT Shipping Name:
HMIS Codes: H=1* F=1 R=O P=B
Emergency Phone:
II. HAZARDOUS INGREDIENTS
INGREDIENTS: CAS # OSHA PEL ACGIH TLV OSHA STEL VAPOR PRESSURE
mm Hg @ Temp.
MODIFIED DIGLYCIDYL 25068-38-6 None None None 1.0 @ 356癋
ETHER OF BISPHENOL A
ALKYL GLYCIDYL ETHER 68609-97-2 None None None NA
* No toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372 are present.
II. PHYSICAL DATA
Boiling Point: 200癋
Vapor Density: NA
Specific Gravity: 1.1
Solubility in Water: Negligible
Evaporation Rate: NA
Appearance and Odor: Low viscosity liquid, clear
IV. FIRE AND EXPLOSION HAZARD DATA
Flashpoint: 200癋
Lower Explosive Limit: NA
Upper Explosive Limit: NA
Extinguishing Media: Foam, alcohol foam, carbon dioxide, dry chemical and water fog.
UNUSUAL FIRE AND EXPLOSION HAZARDS INCLUDE: None known.
Special Firefighting Procedures: Do not enter confined fire area without full bunker gear including a positive pressure NIOSH approved self
contained breathing apparatus. Cool all fire exposed containers with water.
V. HEALTH AND SAFETY
Threshold Limit Value: NA
Effects of Overexposure:
Eyes: May cause irritation but no corneal injury is likely
Skin: May cause irritation or allergic skin response but is not likely to be absorbed in toxic amounts.
Ingestion: This material has a probable low acute oral toxicity.
Inhalation: No guide for control known, however, exposure to heated vapors can cause irritation to the nose, throat or mucous
membranes.
Carcinogenicity: NTP: No. IARC monographs: No. OSHA regulated: No.
Medical conditions generally aggravated by exposure include respiratory conditions or other allergic response.
Emergency and First Aid Procedures:
Eyes: Flush eyes with water for at least fifteen minutes and consult a physician.
Skin: Skin contact will normally cause no more than irritation but wash affected area with soap and water and remove
contaminated clothing promptly.
Ingestion: Low in toxicity, induce vomiting only if large amounts of material are ingested, otherwise do not induce vomiting. In
either case immediately consult with a physician.
Inhalation: Remove victim to fresh air area and administer oxygen if necessary.
VI. REACTIVITY DATA
Conditions to Avoid: Avoid excessive heat or open flames.
Hazardous Decomposition
Products: Carbon dioxide, aldehydes, acids. Reaction with some curing agents can generate large amounts of heat.
Hazardous Polymerization: Will not occur
Incompatibility: Can react vigorously with strong oxidizing agents and strong lewis acids or mineral acids.
Stability: Stable
Version Date: 10/25/02
Material Safety Data Sheet Page 4 of 4
VII. SPILL OR LEAK PROCEDURES
Steps to be Taken if Material is Spilled or Released: Wear respirator and protective clothing. Shut off the source at the leak. Remove excess
with vacuum truck and take up the remainder with an absorbent such as clay and place in disposal containers. Flush area with water to remove
residue.
Waste Disposal Method: Dispose of the material in a waste disposal site in accordance with local, State and Federal laws.
VIII. SAFE HANDLING AND USE INFORMATION
Respiratory Protection: Use a NIOSH approved respirator as required to prevent overexposure to vapor in accordance with 29CFR
1910.134
Ventilation: General exhaust is usually sufficient to control vapors and exposure hazards.
Protective Clothing: Impervious gloves, neoprene or rubber. Splash goggles or glasses with side shields. Wear body covering clothing
and other coverings as necessary such as apron and appropriate footwear to avoid contact with material. Observe
good general hygienic practices.
IX. SPECIAL PRECAUTIONS
Precautions to be Taken in Handling and Storing: Store in cool dry place. Seal all partially used containers. Wash with soap and water be-
fore eating, drinking, smoking or using toilet facilities. Mixed materials contain the hazards of all the components, therefore read the MSDS's of all
the components prior to using material. Properly label all containers.
Other Precautions: Avoid all skin contact. Avoid breathing vapors generated from the material. Observe conditions of good general
hygiene and safe working practices. Contaminated leather articles cannot be cleaned and must be discarded if contaminated with this product.
Wash all contaminated clothing prior to reuse.
SAFETY STATEMENT
The information presented is believed to be accurate, but is not warranted to be whether originating from manufacturer or not. Recipients are
advised to confirm in advance, that the information is current, applicable, and relative to their individual circumstance.
Version Date: 10/25/02
|