NOTES: NA = NOT AVAILABLE
SECTION 3: PHYSICAL DATA
Physical State: White or Colored Paste; White or Colored Liquid
Odour: Very Mild Ammonia Odour
Specific Gravity: 1.0 - 1.7 (Water = 1.0)
Boiling Range: 100 - 130 Deg. C
Solubility in Water: Dilutable
SECTION 4: FIRE AND EXPLOSION HAZARD DATA
Flammability Classification: Not Applicable
Flash Point: Not Combustible
Flammable Limits (% vol. in air): LEL: N. App. UEL: N. App.
Extinguishing Media: Not Applicable.
Special Fire Fighting Procedures: Material in paint can splatter above 100C. Dried
paint film can burn. If this should occur use carbon dioxide, foam, dry chemical or water
to extinguish. Wear full-body protective clothing and self-contained breathing apparatus.
Do not direct extinguishing media directly into center of burning pools.
SECTION 5: REACTIVITY DATA
Stability: Stable
Maintain storage between 0 and 30 oC. Avoid strong oxidizing and
Incompatibility:
reducing agents; strong acids and bases. Keep product away from
open flame.
Conditions to Avoid: Keep product from freezing or excessive heat.
Hazardous Decomposition Products: Low molecular weight hydrocarbons, CO,
CO2, NOx, trace HCl and H2S (with
Ultramarine Blue). All are toxic.
SECTION 6: HEALTH HAZARDS
Inhalation: Pigment powders in this paint are not in the form of respirable dusts,
hence they do not pose the hazards associated with the inhalation of fine
mineral particles. Sanding of dried paint surfaces may result in these
pigments becoming airborne and causing respiratory irritation. Under
spray painting conditions, exposure may cause respiratory irritation.
Silica Compunds: Some products contain crystalline silica in concentrations greater
than 0.1%. Long term overexposure to silica dust causes silicosis, a form of
pulmonary fibrosis . Continued exposure to silica can lead to cardiopulmonary
impairment.
Eye Contact: Prolonged or repeated contact may result in eye irritation.
Skin Contact: Prolonged or repeated contact may result in skin irritation.
Ingestion: May cause irritation to the gastrointestinal system.
Additional Exposure Information: Existing skin, eye, or respritory conditions may be
aggravated by exposure.
SECTION 7: EXPOSURE CONTROL/PERSONAL PROTECTION
Respritory Protection: If spray painting or sanding, wear appropriate government
approved mask. Ensure room as adequate ventilation.
Ventilation: For professional (daily) use adequate ventilation is
recommended, (i.e. window fan).
Eye Protection: Wear safety glasses (with side shields) or goggles.
Skin Protection: Gloves are recommended.
SECTION 8: FIRST AID PROCEDURES
Eye Contact: Flush with clean water for a minimum of 15 minutes. See a
physician after flushing eyes.
Skin Contact: Wash hands with soap and water. If irritation develops see a
physician.
Inhalation: Remove subject to fresh air.
Ingestion: May cause abdominal pain. Do not induce vomiting.Product is not
considered toxic in small amounts. Call a physician. Ingestion of
large amounts may require medical attention.
SECTION 9: HANDLING AND STORAGE PRECAUTIONS
Storage of Paint: Keep from freezing. Keep containers closed.
Spill/ Leak Procedure: Contain spilled paint and clean up. Avoid excessive
inhalation and skin contact.
Paint Disposal: Dispose of paint soaked rags and empty containers in
accordance with regulatory laws.
SECTION 10: OTHER INFORMATION
While Tri-Art Mfg. Inc. has prepared this MSDS from a knowledge of the
products' components and from supplier information, there is no warranty
with respect to the accuracy of this data. We assume no legal responsibility.
All data is offered for your consideration, investigation and verification.