This Safety data Sheet is prepared in accordance with
EU Directive 91/155/EC amended by Directive 2001/58/EC
SAFETY DATA SHEET
BRAKE FLUID SYNTOL HD 205
_________________________________________________________________________________________
1. Identification of the substance/preparation and of the
company/undertaking
_________________________________________________________________________________________
Identification of the substance or preparation
Product name: Syntol HD 205
Product use: Brake fluid DOT 3
Company/undertaking identification
Manufacturer: VELVANA, a.s.
Address: Velvary, Czech Republic
Telephone No.: +420-315 761 289
Internet: www.velvana.cz
Country: Czech republic
__________________________________________________________
2. Composition/information on ingredients
Substance/Preparation:
Ingredient Name: CAS number: % EC Number Classification
143-22-6 <75 205-592-6 Xi; R41
2-(2-(2-butoxyethoxy)ethoxy)ethanol
111-46-6 <25 203-872-2 Xn, R22
2,2'-oxydiethanol
9004-77-7 20-40 500-012-0 Xn, R36
Poly(oxy-1,2-ethanediyl),alpha-
butyl-omega-hydroxy
112-59-4 <5 203-988-3 Xn, R21-41
2-[2-hexyloxyethoxy]ethanol
112-34-5 <5 203-961-6 Xn, R36
2-(2-butoxyethoxy)ethanol
111-77-3 <5 203-906-6 Xn; R63
2-(2-methoxyethoxy)ethanol
112-49-2 <0,5 203-977-3 T R19-61-62
1,2-bis(2-methoxyethoxy)ethane
111-96-6 <0,2 203-924-4 T, R 10-19-60-61
Bis(2-methoxyethyl)ether
Within the present knowledge of the supplier, this product does not contain any hazardous ingredients in quantities
requiring reporting in this section, in accordance with EU regulations or National regulations.
?Occupational Exposure Limit(s), if available, are listed in Section 8.
?See Section 15 for full version of Risk phrases.
__________________________________________________________
3. Hazards identification
The preparation is irritant.
Hazard symbol: Xi
Risk phrases: 41
Safety phrases: 2-24-26-39-46
Most important human health hazards: Risk of serious damage to eyes.
Most important environmental hazards: -
Page: 1/5
Date of issue: 12 April 2007
This Safety data Sheet is prepared in accordance with
EU Directive 91/155/EC amended by Directive 2001/58/EC
SAFETY DATA SHEET
BRAKE FLUID SYNTOL HD 205
Additional Hazards: Flammable liquid of hazard class 4.
________________________________________________________
4. First aid measures
_________________________________________________________________________________________
First aid measures: Take off contaminated clothing
Inhalation: Remove the person to fresh air and seek medical help.
Skin Contact: Wash the affected area thoroughly with soap and water.
Eye contact: Rinse eyes thoroughly with running water for at least 15 minutes while holding eyelids apart, if
necessary, seek medical help.
Ingestion: Rinse mouth with water, drink approx. 0.2 litre of water and seek medical help.
__________________________________________________________
5. Fire-fighting measures
Extinguishing media: Carbon dioxide, powder extinguishers, water fog, alcohol resistant foam.
Special exposure hazards: Dangerous products of combustion ?vapours, carbon monoxide.
Special protective equipment for fire-fighters: When extinguishing larger fires, personnel occurring in an
area threatened by products of combustion shall use breathing apparatus.
__________________________________________________________
6. Accidental release measures
________________________________________________________________________________________
Personal precautions: When handling the product, use protective gloves and goggles.
Environmental precautions and cleanup methods:
Prevent from entering and contaminating soil and surface/groundwater.
Contain spilled liquid with an absorbent (saw dust, sand) and incinerate in an industrial waste incineration
plant.
In compliance with the Ministry of the Environment Ordinance no. 381/2001 Coll. (Waste Catalogue), the
product is listed under no. 16 01 13 * (brake fluids).
Note: See section 8 for personal protective equipment and section 13 for waste disposal.
__________________________________________________________
7. Handling and storage
_________________________________________________________________________________________
Handling:
Aerate and ventilate storage areas and work places. Protect from air/oxygen (peroxides occurrence).
SYNTOL HD 205 brake fluid is supplied in 250ml, 500ml and 4,000ml PE bottles. All types of packaging
are delivered in packs by road transport.
Storage:
The product is hygroscopic. By absorbing moisture it will deteriorate. Store in original, unbroken, tightly
closed packaging in cool storage areas, in compliance with CSN 65 0201 standard.
Take precautionary measures against static discharges.
_________________________________________________________
8. Exposure controls/personal protection
_________________________________________________________________________________________
Page: 2/5
Date of issue: 12 April 2007
This Safety data Sheet is prepared in accordance with
EU Directive 91/155/EC amended by Directive 2001/58/EC
SAFETY DATA SHEET
BRAKE FLUID SYNTOL HD 205
Exposure limit values: none
Exposure controls:
Occupational exposure controls: Provide sufficient ventilation.
Respiratory protection: Not necessary, however do not inhale gases/vapours/aerosols.
Hand protection: Protective gloves (protection against staining)
- short time effect: from nitrile rubber (0.4mm thick), penetration time 30 minutes;
- long time effect: from butyl rubber (0.7mm thick), penetration time 480 minutes.
Eye protection: Goggles or face shield.
Skin protection: Protective clothing.
_________________________________________________________
9. Physical and chemical properties
_________________________________________________________________________________________
General information
Appearance:
Physical state: liquid
Colour: clear yellow
Odour: characteristic
Important health, safety and environmental information
7-11,5 (50% vol. water solution)
pH:
>245
Boiling point (癈):
-50
Melting point (癈):
>110
Flash point (癈):
no data available
Flammability (solid, gas):
no data available
Explosive properties:
no data available
Explosive limits
no data available
Oxidising properties:
1000-1060 kg/m3
Relative density:
soluble in water
Solubility:
<1 hPa
Vapour pressure (at 20癈):
no data available
Evaporation rate (butyl acetate =1):
Congealing point: -50癈 (-58癋)
Other information:
Ignition temperature: >200癈 (>392癈)
Danger class: IV
_________________________________________________________
10. Stability and reactivity
_________________________________________________________________________________________
Stability: The product is stable under normal conditions.
Conditions to avoid: Access of air/oxygen (peroxides occurrence).
Materials to avoid: Strong oxidising agents.
______________________________________________________________________________
11. Toxicological information
_________________________________________________________________________________________
Potential Acute Health Effects
LD50 (oral, rat): >2,000 mg/kg
Primary irritating effect to rabbit skin: not irritant
Page: 3/5
Date of issue: 12 April 2007
This Safety data Sheet is prepared in accordance with
EU Directive 91/155/EC amended by Directive 2001/58/EC
SAFETY DATA SHEET
BRAKE FLUID SYNTOL HD 205
Primary irritating effect to rabbit mucous membranes: not irritant
Over-exposure signs/symptoms
Other adverse effects:
Carcinogenity, sensitisation: No data available.
Other data: The product was not tested. Information has been derived from properties of individual
components.
________________________________________________________
12. Ecological information
_________________________________________________________________________________________
Mobility:
Other adverse effects:
LC50, 96 hr., fish (Leucius idus): >100mg/l
Acute toxicity for aqueous organisms:
Degradability: testing method: OECD 302B; ISO 9888; 88/302/EHS, part C
analysis method: DOC loss
degradability grade: >70%
evaluation: easily removable from water
Micro-organisms/activated sludge effect: With proper inflow of low concentrations into an adapted biological
WWTP, inhibition of degradation activity in activated sludge cannot be expected.
Other data: Do not discharge into water bodies without prior treatment.
The product was not tested. Information has been derived from properties of individual components.
__________________________________________________________
13. Disposal considerations
_________________________________________________________________________________________
Methods of disposal: Absorb by flammable material and incinerate in an industrial waste incineration plant.
Hand over thoroughly cleaned packaging to a waste collecting point.
European Waste Catalogue (EWC): In compliance with the Ministry of the Environment Ordinance no.
381/2001 Coll. (Waste Catalogue), the product is listed under no. 16 01 13 * (brake fluids).
_________________________________________________________
14. Transport information
_________________________________________________________________________________________
International transport regulations: Not subject to ADR provisions.
___________________________________________________________________________________________
15. Regulatory information
_________________________________________________________________________________________
EU Regulations
Risk Phrases:
The preparation is classified as dangerous according to Directive 1999/45/EC and its amendments.
Xi
Irritant
Page: 4/5
Date of issue: 12 April 2007
This Safety data Sheet is prepared in accordance with
EU Directive 91/155/EC amended by Directive 2001/58/EC
SAFETY DATA SHEET
BRAKE FLUID SYNTOL HD 205
Risk Phrases:
41 Risk of serious damage to eyes.
Safety Phrases:
S2 Keep out of the reach of children.
S24 Avoid contact with skin.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S39 Wear eye/face protection.
S46 If swallowed, seek medical advice immediately and show this container or label.
__________________________________________________________
16. Other information
___________________________________________________________________________________________________
R-phrases used in this MSDS:
R10 Flammable.
R19 May form explosive peroxides.
R21 Harmful in contact with skin.
R22 Harmful if swallowed.
R36 Irritating to eyes.
R41 Risk of serious damage to eyes.
R60 May impair fertility.
R61 May cause harm to the unborn child.
R62 Possible risk of impaired fertility.
R63 Possible risk of harm to the unborn child.
Recommended limitations of usage:
The substance shall not be used for any other purpose than the intended one (see Chapter 1.2). As
specific conditions of the substance usage are beyond control of the supplier, it is the responsibility of the
user to adapt specified notices for local laws and regulations. Safety information describes the product in
terms of safety and therefore shall not be considered to be technical information about the product.
The MSDS was elaborated by:
Ing. Jan Skolil
Date of issue: 12 April 2007
Notice to Reader:
To the best of our knowledge, the information contained herein is accurate. However, neither the above named
supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the
information contained herein. Final determination of suitability of any material is the sole responsibility of the
user. All materials may present unknown hazards and should be used with caution. Although certain hazards are
described herein, we cannot guarantee that these are the only hazards that exist.
Page: 5/5
Date of issue: 12 April 2007
|