Material Safety Data Sheet HMIS?br>
HEALTH 2 REACTIVITY 0
PERSONAL PROTECTION
FLAMMABILITY 3 B
SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Identity: Rinz Off (Wash-Out) White Note: Blank spaces are not permitted. If any item is not
Item No.: 44709, 91709 applicable, or no information is available, the space must be
Other Names: 916, AM44 marked to indicate that.
Formula: Y709
Another Exclusive Product of: Emergency Telephone Number
ITW Dykem 1-800-535-5053 (Domestic), 1-352-323-3500 (International)
Address (Number, Street, City, State, and ZIP Code) Telephone Number for Information
805 East Old 56 Highway 1-800-443-9536 or 1-913-397-9889
Olathe, KS 66061-4914 Date Prepared
10/09/08
Product Class: Solvent based marker. Signature of Preparer (Optional)
Regulatory Dept.
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components (Specific Other Limits
Chemical Identity, Common Name(s) CAS No. OSHA PEL ACGIH-TLV Recommended %(Opt.)
Methyl Ethyl Ketone 78-98-3 TWA 200 ppm TWA 200 ppm No Data 45 ?55
Cyclohexanone 108-94-1 TWA 25 ppm TWA 25 ppm No data 20 ?30
Titanium Dioxide 13463-67-7 TWA 10 mg/m3 TWA 10 mg/m3 Nuisance dust* 20 - 25
n-Propanol 71-23-8 TWA 200 ppm TWA 200 ppm No data 1-5
*Nuisance dust as free dust only, not as bound in paint or ink.
SECTION 3 HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW ?White thin viscosity liquid with mild alcohol odor. Warning! Flammable liquid and vapor.
Keep away from heat sparks and flames. May cause eye, skin and respiratory tract irritation. If swallowed do not induce
vomiting. Get immediate medical attention.
POTENTIAL HEALTH EFFECTS
Eyes: Liquid is moderately irritating to the eyes.
Skin: Liquid is mildly irritating to the skin.
Ingestion: Ingestion of liquid may cause vomiting.
Inhalation: High concentration of vapors may produce irritation of the respiratory tract, headache, dizziness, and nausea.
CHRONIC HEALTH EFFECTS
Prolonged or repeated contact may cause skin sensitization or dermatitis. Reports have associated repeated and prolonged
occupational overexposure to solvents with irreversible brain and nervous system damage. Intentional misuse by deliberately
concentrating or inhaling this product may be harmful or fatal.
SECTION 4 FIRST AID MEASURES
Eyes ?Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.
Inhalation ?Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical
attention immediately.
Skin ?Flush skin with plenty of water. Remove contaminated clothing and shoes.
Ingestion ?If large quantities of this material are swallowed, get immediate medical attention. Do not induce vomiting. Never
give anything by mouth to an unconscious person.
- 1- Formula: Y709
SECTION 5 FIRE FIGHTING MEASURES
Flash Point (Method Used) Flammable Limits LEL UEL
1.8 11.5
25?F
Extinguishing Media -
Use water fog, foam, dry chemical or CO2. Use water spray to cool fire-exposed containers and to protect personnel.
Special Fire Fighting Procedures -
Keep containers cool and vapors down with water spray. Prevent spill from entering drains, sewers, streams or other bodies of
water. If run-off occurs, notify proper authorities. Do not enter confined fire space without full bunker gear (helmet with face
shield, bunker coats, gloves and rubber boots), including a positive pressure NIOSH approved self-contained breathing apparatus.
Unusual Fire and Explosion Hazards ?Vapors are heavier than air and may travel along ground, or be moved by ventilation and
be ignited by ignition source.
SECTION 6 ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Absorb liquid with non-combustible floor absorbent and place in non-leaking container; seal properly and
dispose of properly in compliance with federal, state, and local regulations.
LARGE SPILL: Evacuate area of unprotected personnel. Eliminate all ignition sources. Stop spill at source if safe to do so.
Handling equipment must be grounded to prevent sparking. Prevent spill from entering drains, sewers, streams or other bodies of
water. If run-off occurs, notify proper authorities. Pump or vacuum transfer spilled product to clean containers for recovery.
Absorb unrecoverable product. Transfer contaminated absorbent, soil and other materials to containers for disposal. Dispose of
properly in compliance with federal, state, and local regulations.
SECTION 7 HANDLING AND STORAGE
HANDLING: Empty containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose such containers to heat, sparks, flames, static electricity, or other sources of ignition. Many hot
organic chemical vapors or mists are susceptible to sudden spontaneous combustion when mixed with air. Ignition may occur at
temperatures below those published in the literature as "autoignition" or ignition temperatures. Ignition temperatures decrease with
increasing vapor volume and vapor volume and vapor/air contact time, and are influenced by pressure changes. Ignition of organic
chemical vapors may occur at typical elevated-temperature process conditions, especially in processes operating under vacuum if
subjected to sudden ingress of air, or outside process equipment operating under elevated pressure if sudden escape of vapors or
mists to the atmosphere occurs. Any proposed use of this product in elevated-temperature processes should be thoroughly
evaluated to assure that safe operating conditions are established and maintained.
STORAGE:
Keep away from heat, sparks and open flames. Keep out of reach of children. Keep container tightly sealed when not in use. Store
in cool, well-ventilated place away from incompatible materials. Information on this Material Safety Data Sheets refers to ink used
in pens and markers, however, it applies to these inks in bulk. The inks are contained in capillary or valve reservoirs and will not
spill or leak under normal conditions.
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Protection (Specify Type) ?br>
Not usually necessary. Use with adequate ventilation. Use NIOSH/MSHA approved respirator if PELs or TLVs are exceeded.
Not usually needed Special None
Engineering Local Exhaust
Yes None
Controls Mechanical (General) Other
Protective Gloves ?Chemical resistant gloves if skin contact is Eye Protection ?Not normally required if used as intended.
possible (consult your safety equipment supplier). Wear chemical splash goggles in compliance with OSHA
regulation if splashing is possible.
Other Protective Clothing or Equipment -
Not usually necessary. For bulk material, if direct contact is possible, wear apron, boots, face shield, etc. as needed.
Work/Hygienic Practices -
Follow label instructions. Wash hands after use and before eating, drinking, smoking, using restrooms, etc.
- 2-
Formula: Y709
SECTION 9 PHYSICAL AND CHEMICAL
PROPERTIES
Boiling Point Specific Gravity (H2O = 1)
207 oF @70o F <1
Vapor Pressure (mm-Hg @ 70o F) Melting Point
No Data No Data
Greater than 1.3
Vapor Density (AIR = 1) Evaporation Rate (Butyl Acetate = 1)
one (1)
70-80%
Solubility in Water pH
No Data
Appearance and Odor ?White thin viscosity liquid with mild alcohol odor.
VOC: This product contains 759 grams per liter or 72.5% by weight VOC's.
SECTION 10 STABILITY AND REACTIVITY
Conditions to Avoid ?None known.
Chemical Unstable
X
Stability Stable
Incompatibility (Materials to Avoid) -
Strong oxidizing and reducing agents, strong alkalies and strong acids.
Hazardous Decomposition or Byproducts -
Carbon dioxide, carbon monoxide, smoke, soot and various organic oxidation by-products.
Conditions to Avoid - No data
Hazardous May Occur
X
Polymerization Will Not
Occur
SECTION 11 TOXICOLOGICAL INFORMATION
Please refer to Section 3 for available information on potential health effects
SECTION 12 ECOLOGICAL INFORMATION
No specific ecological data are available for this product. Please refer to Section 6 for information regarding accidental releases
and Section 15 for regulatory reporting information.
SECTION 13 DISPOSAL CONSIDERATIONS
Dispose of in accordance with all applicable local, state and federal regulations.
SECTION 14 TRANSPORT INFORMATION (Not meant to be all inclusive)
Domestic Highway (Containers < 1 Quart are ORM-D) Domestic Air Shipments (Pens)
Proper Shipping Name: Paint Proper Shipping Name: Consumer Commodity
Hazard Class/Subsidiary Hazard: 3 Hazard Class/Subsidiary Hazard: 9
UN/NA No.: UN1263 UN/NA No.: I.D. 8000
Packing Group: II Packing Group: None
Label Required: Flammable Liquid (3) Label Required: Class 9
SECTION 15 REGULATORY INFORMATION (Not meant to be all inclusive - selected regulations represented)
U.S. FEDERAL REGULATIONS:
Carcinogenicity: NTP? IARC Monographs? OSHA Regulations?
No No No
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
SECTION 313: This product does not contain toxic chemicals that are listed and may require reporting under SARA Title III Sec.
313 if used over the threshold reporting quantity. This information must be included in all MSDSs that are copied and distributed
for this material.
TSCA (Toxic Substances Control Act) Status
All ingredients are on the TSCA inventory or are not required to be listed on the TSCA inventory.
INTERNATIONAL REGULATIONS:
CANADIAN WHMIS: Not WHMIS controlled (pens) Bulk: Class B2, D2A
STATE REGULATIONS:
CALIFORNIA PROPOSITION 65: This product is not known to contain any material listed under California's Proposition 65.
- 3- Formula: Y709
SECTION 16 OTHER INFORMATION
MSDS Status: Revised Section(s):
10/9/08: TSCA statement has been inserted.
WARNING! The use of this product is beyond the control of the manufacturer and distributor; therefore, no guarantee, expressed
or implied, is made as to the effects of such or the results to be obtained if not used in accordance with directions or established safe
practice. The user must assume all responsibility, including injury or damage, resulting from its misuse as such, or in combination
with other materials. The manufacturer and distributor warrant only that this product meets the specifications for such product.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AS TO DESCRIPTION,
QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, PRODUCTIVENESS, OR ANY OTHER
MATTER OF THIS PRODUCT. THE MANUFACTURER AND DISTRIBUTOR SHALL BE IN NO WAY RESPONSIBLE FOR
THE PROPER USE OF THIS PRODUCT. The sole and exclusive remedy against the manufacturer and distributor for breach of
warranty shall be reimbursement of the purchase price of the product in the event that a defective condition of the product shall be
found to exist. NO OTHER REMEDY (INCLUDING BUT NOT LIMITED TO INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS)
SHALL BE AVAILABLE.
- 4-
Formula: Y709
|