CHEMTREC Transportation
Emergency Phone: 800-424-
9300
Material Safety Pittsburgh Poison Control
Center
Health Emergency No.: 412-
Data Sheet 681-6669
NOTE: The CHEMTREC Transportation
Emergency Phone is to be used only in the
event of chemical emergencies involving a
spill, leak, fire, exposure or accident involving
chemicals
Section 1 - Chemical Product / Company Information
BITUMASTIC 300 M PART A Revision Date: 03/25/2008
Product Name:
Identification
PLMSDS 0165A5NL Supercedes : 07/29/2005
Number:
Coal Tar Epoxy - FOR INDUSTRIAL
Product
USE ONLY
Use/Class:
Regulatory, Department
Preparer:
Manufacturer: Carboline Company
350 Hanley Industrial Ct.
St. Louis, MO 63144
Section 2 - Composition / Information On Ingredients
Chemical Name CAS Number Weight % Less Than ACGIH TLV-TWA ACGIH TLV-STEL OSHA PEL-TWA OSHA-CEIL
COAL TAR FIBER PITCH 65996-93-2 35.0 0.2 MGM3 N/E 0.2 MGM3 NE
TALC 14807-96-6 30.0 N/E N/E N/E N/E
POLYAMIDE 68082-29-1 15.0 NE NE NE NE
META-XYLENE 108-38-3 10.0 434 Mg/M3 651 Mg/M3 434 Mg/M3 N/E
PARA-XYLENE 106-42-3 5.0 434 Mg/M3 651 Mg/M3 434 Mg/M3 N/E
ETHYL BENZENE 100-41-4 5.0 100 PPM 125 PPM 435 MGM3 N/E
ORTHO-XYLENE 95-47-6 5.0 434 Mg/M3 651 Mg/M3 434 Mg/M3 N/E
CLAY TRADE SECRET 5.0 NE NE NE NE
ETHYL ALCOHOL 64-17-5 5.0 1000 PPM N/E 1900 MGM3 N/E
CLAY 68911-87-5 5.0 NE NE NE NE
TRIS-2,4,6- 90-72-2 5.0 NE N/E NE NE
(DIMETHYLAMINOMETHYL)
PHENOL
MICROCRYSTALLINE 14808-60-7 0.4 0.025 MG/M3 N/E 0.1 MG/M3 N/E
SILICA (respirable) (respirable)
TOLUENE 108-88-3 0.2 20 PPM N/E 375 MGM3 NE
Section 3 - Hazards Identification
Emergency Overview: FLAMMABLE liquid and vapor. Contains SILICA which can cause cancer. Contains
COAL TAR which can cause cancer. Contains AROMATIC DISTILLATE whcih can cause cancer. Risk of
Cancer depends on duration and level of exposure.
Effects Of Overexposure - Eye Contact: Can cause eye burns.
Effects Of Overexposure - Skin Contact: Can cause skin burns. May cause allergic skin reaction.
Page 1 of 6
Effects Of Overexposure - Inhalation: Harmful if inhaled, may affect the brain or nervous system, causing
dizziness, headache, or nausea. May cause nose and throat irritation. May cause lung irritation. May cause
allergic respiratory reaction, effects may be permanent.
Effects Of Overexposure - Ingestion: Harmful if swallowed.
Effects Of Overexposure - Chronic Hazards: Reports have associated repeated and prolonged
occupational overexposure to solvents with permanent brain and nervous system damage. Crystalline silica is
known to cause silicosis. Crystalline silica (Quartz) is classified as a known human carcinogen (Group 1) by
IARC. Exposure is by route of inhalation. If material is in a liquid matrix it is unlikely to be inhaled. However,
when sanding or grinding the finished product, there may be potential for crystalline silica to become airborne.
Primary Route(s) Of Entry: Skin Contact, Skin Absorption, Inhalation, Ingestion, Eye Contact
Medical Conditions Prone to Aggravation by Exposure: If sensitized to amines, epoxies, or other
chemicals do not use. See a physician if a medical condition exists. If you have a condition that could be
aggravated by exposure to dust or organic vapors, see a physician prior to use.
Section 4 - First Aid Measures
First Aid - Eye Contact: If material gets into eyes, flush with water immediately for 15 minutes. Consult a
physician.
First Aid - Skin Contact: In case of contact, immediately flush skin with plenty of water while removing
contaminated clothing and shoes. Launder clothing before reuse. If rash or irritation develops, consult a
physician.
First Aid - Inhalation: If inhaled, remove to fresh air. Administer oxygen if necessary. Consult a physician if
symptoms persist or exposure was severe.
First Aid - Ingestion: If swallowed do not induce vomiting. Seek immediate medical attention.
Section 5 - Fire Fighting Measures
Flash Point, F: 75F (23C) Lower Explosive Limit, %: 0.8
Upper Explosive Limit, %: 7.1
(Setaflash)
Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam, Water Fog
Unusual Fire And Explosion Hazards: Flammable Liquid. Vapors are heavier than air and will accumulate.
Vapors will form explosive concentrations with air. Vapors travel long distances and will flashback. Use
mechanical ventilation when necessary to keep percent vapor below the "Lower Explosion Level" (LEL).
Eliminate all ignition sources. Keep away from sparks, open flames and heat sources. All electric equipment
and installations should be made and grounded in accordance with the National Electrical Code. In areas
where explosion hazards exist, workers should be required to use non-ferrous tools and to wear conductive
and non-sparking shoes.
Special Firefighting Procedures: Flammable. Cool fire-exposed containers using water spray.
Section 6 - Accidental Release Measures
Page 2 of 6
Steps To Be Taken If Material Is Released Or Spilled: Eliminate all ignition sources. Handling equipment
must be grounded to prevent sparking. Evacuate the area of unprotected personnel. Wear appropriate
personal protection clothing and equipment. Follow exposure controls/personal protection guidelines in Section
8. Contain and soak up residual with an aborbent (clay or sand). Take up absorbant material and seal tightly
for proper disposal. Dispose of in accordance with local, state and federal regulations. Refer to Section 15 for
SARA Title III and CERCLA information.
Section 7 - Handling And Storage
Handling: Do not get in eyes, on skin, or on clothing. Keep container tightly closed when not in use. Wear
personal protection equipment. Do not breathe vapors. Wash thoroughly after handling. If pouring or
transferring materials, ground all containers and tools. Do not weld, heat, cut or drill on full or empty containers.
Use only in accordance with Carboline application instructions, container label and Product Data Sheet. Avoid
breathing vapors or spray mist.
Storage: Keep away from heat, sparks, open flames and oxidizing agents. Keep containers closed. Store in a
cool, dry place with adequate ventilation.
Section 8 - Exposure Controls / Personal Protection
Engineering Controls: Use explosion-proof ventilation when required to keep below health exposure
guidelines and Lower Explosion Limit (LEL).
Respiratory Protection: Use only with ventilation to keep levels below exposure guidelines listed in Section 2.
User should test and monitor exposure levels to ensure all personnel are below guidelines. If not sure, or not
able to monitor, use MSHA/NIOSH approved supplied air respirator. Follow all current OSHA requirements for
respirator use. For silica containing coatings in a liquid state, and/or if no exposure limits are established in
Section 2 above, supplied air respirators are generally not required.
Skin Protection: Recommend impervious gloves and clothing to avoid skin contact. If material penetrates to
skin, change gloves and clothing. The use of protective creams may be beneficial to certain individuals.
Protective creams should be applied before exposure.
Eye Protection: Recommend safety glasses with side shields or chemical goggles to avoid eye contact.
Other protective equipment: Eye wash and safety showers should be readily available.
Hygienic Practices: Wash with soap and water before eating, drinking, smoking, applying cosmetics, or using
toilet facilities. Use of a hand cleaner is recommended. Launder contaminated clothing before reuse. Leather
shoes can absorb and allow hazardous materials to pass through. Check shoes carefully after soaking before
reuse.
Section 9 - Physical And Chemical Properties
176 F (80 C) - 284 F (140 C) Heavier than Air
Boiling Range: Vapor Density:
Tar Odor N/D
Odor: Odor Threshold:
Viscous Black or Red Liquid Slower Than Ether
Appearance: Evaporation Rate:
N/D
Solubility in H2O:
N/D 1.32
Freeze Point: Specific Gravity:
N/D N/D
Vapor Pressure: PH:
Liquid
Physical State:
Page 3 of 6
(See section 16 for abbreviation legend)
Section 10 - Stability And Reactivity
Conditions To Avoid: Heat, sparks and open flames.
Incompatibility: Keep away from strong oxidizing agents, heat and open flames.
Hazardous Decomposition Products: Carbon monoxide, nitrogen oxides, and unidentified organic
compounds. Consider all smoke and fumes from burning material as very hazardous. Welding, cutting or
abrasive grinding can create smoke and fumes. Do not breathe any fumes or smoke from these operations.
Hazardous Polymerization: Will not occur under normal conditions.
Stability: This product is stable under normal storage conditions.
Section 11 - Toxicological Information
Product LD50: N/D Product LC50: N/D
Chemical Name CAS Number LD50 LC50
COAL TAR FIBER PITCH 65996-93-2 NOT AVAILABLE NOT AVAILABLE
TALC 14807-96-6 NOT AVAILABLE NOT AVAILABLE
POLYAMIDE 68082-29-1 >2000 MG/KG ORAL,RAT NOT AVAILABLE
META-XYLENE 108-38-3 NOT AVAILABLE NOT AVAILABLE
PARA-XYLENE 106-42-3 NOT AVAILABLE NOT AVAILABLE
ETHYL BENZENE 100-41-4 3500 MG/KG RAT,ORAL NOT AVAILABLE
ORTHO-XYLENE 95-47-6 NOT AVAILABLE NOT AVAILABLE
CLAY TRADE SECRET NOT AVAILABLE NOT AVAILABLE
ETHYL ALCOHOL 64-17-5 7060 MG/KG, ORAL, RAT 20000 PPM/10 HRS, RAT, INHALATION
CLAY 68911-87-5 NOT AVAILABLE NOT AVAILABLE
TRIS-2,4,6- 90-72-2 2169 MG/KG ORAL NOT AVAILABLE
(DIMETHYLAMINOMETHYL)
PHENOL
MICROCRYSTALLINE SILICA 14808-60-7 NOT AVAILABLE NOT AVAILABLE
TOLUENE 108-88-3 5.0 G/KG RAT ORAL, 14G/KG RABBIT DERMAL 8000 PPM/4HRS, RAT, INHALATION
Section 12 - Ecological Information
Ecological Information: No data
Section 13 - Disposal Information
Disposal Information: Dispose of in accordance with State, Local, and Federal Environmental regulations.
Responsibility for proper waste disposal is with the owner of the waste.
Section 14 - Transportation Information
Paint Packing Group: III
DOT Proper Shipping
Name:
N/A Hazard Subclass:N/A
DOT Technical Name:
3 128
DOT Hazard Class: Resp. Guide
Page:
Page 4 of 6
UN 1263
DOT UN/NA Number:
Additional Notes: None.
Section 15 - Regulatory Information
CERCLA - SARA HAZARD CATEGORY
This product has been reviewed according to the EPA Hazard Categories promulgated under Sections 311and
312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
IMMEDIATE HEALTH HAZARD, CHRONIC HEALTH HAZARD, FIRE HAZARD
SARA SECTION 313
This product contains the following substances subject to the reporting requirements of Section 313 of Title III
of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Chemical Name CAS Number
META-XYLENE 108-38-3
PARA-XYLENE 106-42-3
ETHYL BENZENE 100-41-4
ORTHO-XYLENE 95-47-6
TOLUENE 108-88-3
TOXIC SUBSTANCES CONTROL ACT
All components of this product are listed on the TSCA inventory.
This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if
exported from the United States:
Chemical Name CAS Number
PARA-XYLENE 106-42-3
U.S. STATE REGULATIONS AS FOLLOWS:
NEW JERSEY RIGHT-TO-KNOW
The following materials are non-hazardous, but are among the top five components in this product.
Chemical Name CAS Number
IRON OXIDE 1332-37-2
PENNSYLVANIA RIGHT-TO-KNOW
The following non-hazardous ingredients are present in the product at greater than 3%.
Chemical Name CAS Number
IRON OXIDE 1332-37-2
Page 5 of 6
CALIFORNIA PROPOSITION 65
Warning: The following ingredients present in the product are known to the state of California to cause
Cancer:
Chemical Name CAS Number
ETHYL BENZENE 100-41-4
MICROCRYSTALLINE SILICA 14808-60-7
Warning: The following ingredients present in the product are known to the state of California to cause
birth defects, or other reproductive hazards:
Chemical Name CAS Number
TOLUENE 108-88-3
INTERNATIONAL REGULATIONS AS FOLLOWS:
CANADIAN WHMIS
This MSDS has been prepared in compliance with Controlled Product Regulations except for the use of the 16
headings.
CANADIAN WHMIS CLASS: B2 D2A D2B
Section 16 - Other Information
HMIS Ratings
Health: 3 Flammability: 3 Reactivity: 1 Personal Protection: X
VOLATILE ORGANIC COMPOUNDS, GR/LTR MIXED (UNTHINNED): 222
REASON FOR REVISION: Changes made in Section(s) : 2, 3, 11, and 15
Legend: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
The information contained herein is, to the best of our knowledge and belief accurate. However, since the
conditions of handling and use are beyond our control, we make no guarantee of results, and assume no
liability for damages incurred by use of this material. It is the responsibility of the user to comply with all
applicable federal, state, and local laws and regulations
Page 6 of 6
|