MATERIAL SAFETY DATA SHEET PAGE #: 1 OF 4
PRODUCT NAME: BT-404
MSDS NUMBER: 40902BT404 PRODUCT CODE: STEAM LINE TREATMENT
MSDS DATE: 4/09/02 KEY NUMBER: BT-404
EMERGENCY PHONE #'s: 800-255-3924 (CHEMTEL)
2
HEALTH Hazardous
1
FIRE Flash Point: Above 200 F, 93 C
Advanced Chemical Technology, Inc.
0
REACTIVITY Stable
10743 Edison Court ?Rancho Cucamonga, CA 91730 USA
Ph: 1-800-527-9607 / Fax: 1-909-980-9366
Corrosive - COR
SPECIFIC
Web: http://www.actglobal.net Email: act@actglobal.net
1. IDENTIFICATION See Addendum: Ref. PAGE:
Chemical Name: BT-404
Chemical Family: AMINES
CAS #: 100-37-8 Chemical Formula: MIXTURE
CAS Name: MIXTURE Molecular Weight: MIXTURE
Synonyms / Common Name: CONDENSATE TREATMENT, STEAMLINE TREATMENT
DOT Information: CORROSIVE
2. PHYSICAL DATA See Addendum: Ref. PAGE:
Appearance: Clear Liquid Melting Point: NA
Color: Amber/White Boiling Point: >212 F
State: Liquid Flash Point: > 200 F
Odor Characteristics: Ammoniacal Odor Freezing Point: ND
pH: >11.6 Percent Volatility: ND
Viscosity: NE Evaporation Rate (BAc = 1): ND
Specific Gravity (Water = 1): 0.997 Solubility in Water: Miscible
Vapor Density (Air = 1): Like Water Solubility in Oil: ND
Vapor Pressure: ND Solubility in Acetone: ND
3. INGREDIENTS - HAZARDOUS See Addendum: Ref. PAGE:
Material / Components CAS #: CAS Name TLV Units Approx. %
Diethylaminoethanol 100-37-8 Diethylaminoethanol 10 ppm 40
4. FIRE AND EXPLOSION HAZARD DATA See Addendum: Ref. PAGE:
Flammable Limits Lower
Flash Point: > 200 F ND
in Air % by volume: Upper ND
Extinguishing Media: Water spray, foam, carbon dioxide or dry chemical for fires in storage areas.
Special Fire Fighting Keep container cool with water spray. Fire Fighters should wear self-contained breathing apparatus and full protective clothing.
Procedures:
Unusual Fire & Extinguish all nearby sources of ignition because vapors may be moved by air currents to ignition sources distant from the
Explosion Hazards: handling point. Irritating vapors may be emitted during a fire.
MATERIAL SAFETY DATA SHEET PAGE #: 2 OF 4
PRODUCT NAME: BT-404
MSDS NUMBER: 40902BT404
Advanced Chemical Technology, Inc. MSDS DATE: 4/09/02
10743 Edison Court ?Rancho Cucamonga, CA 91730 USA
PRODUCT CODE: STEAM LINE TREATMENT
Ph: 1-800-527-9607 / Fax: 1-909-980-9366
KEY NUMBER: BT-404
Web: http://www.actglobal.net Email: act@actglobal.net
5. HEALTH HAZARD DATA See Addendum: PAGE #:
Threshold Limit Value: 10 ppm for Diethylaminoethanol
Effects of Overexposure:
Inhalation: Vapor and mists are corrosive to the nose, throat, and mucous membranes..
Skin Contact: Causes severe skin irritation. May cause a more serious response if confined to the skin or if the skin is abraded. A
single prolonged exposure is not likely to result in harmful quantities being absorbed.
Eye Contact: Vapors will irritate the eyes. Liquids and mists can severely irritate or damage the eyes and cause corneal burns..
Ingestion: This material is corrosive to the mouth and throat.
Delayed Effects: Primary irritant dermatitis. Prolonged contact may result in destruction of tissue.
Medical Conditions Persons with pre-existing skin disorders, eye problems, or impaired respiratory functions may be more susceptible to
Aggravated by Exposure the effects of this substance.
6. FIRST AID MEASURES See Addendum: PAGE #:
Inhalation: If breathing stops, give artificial respiration. Call a physician immediately.
Skin Contact: Immediately remove clothing under a safety shower. Flush all affected areas with large amounts of water for at least
15 minutes.
Eye Contact: Immediately flush the eyes with large quantities of running water for a minimum of 15 minutes. Obtain medical
attention immediately.
Ingestion: Do not induce vomiting. If conscious, immediately give large quantities of water to dilute. Call a physician or the
nearest Poison Control Center immediately.
NOTES TO PHYSICIAN: None.
7. REACTIVITY DATA See Addendum: PAGE #:
Stability: Stable
Incompatibility: Strong oxidizing agents, halogen compounds, acids, copper, aluminum and galvanized metals.
(materials to avoid)
Hazardous Combustion or Carbon monoxide, carbon dioxide, ammonia, and oxides of nitrogen.
Decomposition Products
Hazardous Polymerization: Will not occur.
Conditions to Avoid: Do not mix with other industrial chemicals.
8. SPILL OR LEAK PROCEDURES See Addendum: PAGE #:
Actions to take for Remove ignition sources. Ventilate enclosed areas. For spills wipe up with absorbent and place into chemical waste
Leaks & Spills container. Contain by diking with soil or other absorbent material. Keep out of sewers, drains, surface waters, and
soil.
Waste Disposal Method: Flush area with detergent and water to remove final traces after using absorbent. Use D.O.T. approved containers
for waste disposal. Dispose of all waste according to Federal, State, and Local regulations.
MATERIAL SAFETY DATA SHEET PAGE #: 3 OF 4
PRODUCT NAME: BT-404
MSDS NUMBER: 40902BT404
Advanced Chemical Technology, Inc. MSDS DATE: 4/09/02
10743 Edison Court ?Rancho Cucamonga, CA 91730 USA
PRODUCT CODE: STEAM LINE TREATMENT
Ph: 1-800-527-9607 / Fax: 1-909-980-9366
KEY NUMBER: BT-404
Web: http://www.actglobal.net Email: act@actglobal.net
9. SPECIAL PROTECTION INFORMATION See Addendum: Ref. PAGE:
Resporatory Protection: NIOSH approved respirator in the absence of adequate environmental controls at the point of use.
Eye Protection: Chemical goggles and face shield.
Skin Protection: Rubber gloves.
Other Clothing: Rubber apron and protective clothes.
Other Equipment: Eye wash station
Engineering Controls: Normal
10. HANDLING AND STORAGE See Addendum: Ref. PAGE:
Special Precautions: Do not get in eyes, on skin, or on clothing. Local mechanical exhaust ventilation capable of maintaining emissions at
the point of use below the PEL.
Other Precautions: A safety shower should be nearby and ready for use. Avoid storing in areas of high heat. Keep from freezing.
?See Addendum:
11. REGULATORY INFORMATION Ref. PAGE: 4
Workplace Classification: ND
12. TOXICOLOGICAL INFORMATION See Addendum: Ref. PAGE:
Acute Data: ND
Reproductive / NE
Teratology Data
13. ECOLOGICAL INFORMATION See Addendum: Ref. PAGE:
Fate in the Environment: NE
14. DISPOSAL CONDITIONS See Addendum: Ref. PAGE:
Procedures: Dispose of all waste according to Federal, State, and Local regulations.
15. TRANSPORTATION INFORMATION See Addendum: Ref. PAGE:
DOT Classification: Corrosive, NOS,8, UN 2686, PG II
(Contains Diethylaminoethanol , 40% Aqueous Solution)
Warning Labels: CORROSIVE
MATERIAL SAFETY DATA SHEET PAGE #: 4 OF 4
PRODUCT NAME: BT-404
MSDS NUMBER: 40902BT404
Advanced Chemical Technology, Inc. MSDS DATE: 4/09/02
10743 Edison Court ?Rancho Cucamonga, CA 91730 USA
PRODUCT CODE: STEAM LINE TREATMENT
Ph: 1-800-527-9607 / Fax: 1-909-980-9366
KEY NUMBER: BT-404
Web: http://www.actglobal.net Email: act@actglobal.net
ADDENDUM for Section - 11. REGULATORY INFORMATION - Ref. Pg. 3
RCRA Status: DOO2
CERCLA Status: Not Regulated
SARA/Title III- Section 304 Emergency notification reporting. This product does not contain a Section 304 listed hazardous substance for emergency release
notification.
SARA/Title III- Section 313 Toxic chemical release reporting. This product does not contain a Section 313 listed toxic chemical subject to release reporting
requirements.
TSCA Inventory Status- All chemical components are listed on TSCA Inventory.
California Proposition 65 Status- This product does not contain chemicals currently on the California list of known carcinogens and/or reproductive toxins.
ADDENDUM for Section - Other Information
NA = Not Applicable
ND = Not Determined
NE = Not Established
The information contained herein is provided in good faith and is believed to be correct as of the date hereof. However, Advanced Chemical Technology
makes no representation as to the comprehensiveness or accuracy of the information. It is expected that individuals receiving the information will exercise
their independent judgement in determining its appropriateness for a particular purpose. Accordingly, Advanced Chemical Technology will not be responsible
for damages of any kind resulting from the use of or reliance upon such information. No representations, or warranties, either expressed or implied or
merchantability fitness for a particular purpose or of any other nature are made hereunder with respect to the information set forth herein or to the product to
which the information refers.
ADDENDUM for Section -
|