IDENTIFICATION
Sika?Primer 209
PRODUCT NAME:
OTHER NAMES: Resin solution
MANUFACTURER'S PRODUCT CODE: None
U.N. NUMBER: 1866
DANGEROUS GOODS CLASS: Class 3 Flammable
HAZCHEM CODE: 3[Y]E
POISONS SCHEDULE NUMBER: 6
USE: Black out primer for polymer glass substitutes when bonding with
Sikaflex?br>
PHYSICAL DESCRIPTION/PROPERTIES:
APPEARANCE: Carbon black filled, solvent based, moisture curing polyurethane
primer.
BOILING POINT/MELTING POINT: Not known
VAPOUR PRESSURE: ~ 100hPa @ 20篊
SPECIFIC GRAVITY: ~ 1.0
FLASHPOINT: -4篊
FLAMMABILITY LIMITS: 2% to 12% Vol.
SOLUBILITY IN WATER: Negligible
ADVICE NOTE:
The information contained in this Material Safety Data Sheet corresponds to our best knowledge
at the time of publication. Each user should read the MSDS and Technical Data Sheet prior to
handling and use.
This product is sold subject to our latest standard terms and conditions.
Page 2 of 3
Product Name: Sika?Primer 209
Date of Issue: February `02
OTHER PROPERTIES:
Viscosity 70mPa.s @20篊
Hazardous Decomposition Products: Carbon oxides and nitrogen compounds
Hazardous Reactions: Strong acids and oxidising agents
INGREDIENTS:
Chemical Name: CAS Number: Proportion:
Polyurethane Prepolymer - 30 ?60 %
Carbon Black 1333-86-4 10 ?30 %
MEK 78-93-3 10 ?30 %
Ethyl Acetate 141-78-6 10 ?30 %
Isocyanate monomer 4151-51-3 <1%
Other Non-hazardous components - to 100 %
HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
Acute:
Swallowed: Toxic - seek immediate medical attention.
Eye: Potentially serious - seek immediate attention.
Skin: Potential for irritation - avoid contact.
Inhaled: Potential for drowsiness, breathing difficulties or nausea. Use in
well ventilated area.
Chronic:
FIRST AID:
Swallowed: Do not induce vomiting - seek immediate medical attention.
Eye: Immediately irrigate eye with water for 15 minutes, then seek
medical assistance.
Skin: Remove affected clothing and thoroughly wash affected area with
soap and water.
Inhaled: Remove patient from contaminated area and put in well ventilated
area. Resuscitate as necessary, seek medical attention.
First Aid Facilities:
ADVICE TO DOCTOR: In all cases of ingestion, inhalation or eye contact, seek medical
attention.
PRECAUTIONS FOR USE
EXPOSURE STANDARDS:
Ethyl Acetate 400ppm 1440mg/m?TWA
MEK 150ppm 445mg/m?TWA 300ppm 890mg/m?STEL
Isocyanates (All as 璑CO) 0.02 mg/m3 TWA 0.07 mg/m3 STEL
ENGINEERING CONTROLS: Good local ventilation. Organic vapour canister mask or aired
mask is recommended if using in confined or poorly ventilated
place.
PERSONAL PROTECTION: Wear safety glasses or chemical goggles, use PVC or rubber
gloves. When using in poorly ventilated areas use half-face filter
respirator suitable for organic vapours'. Respirators shall comply
with AS 1716 Respiratory Devices and shall be used in
accordance with AS 1715 which describes the selection, use and
maintenance of Respiratory Protective Devices.
Page 3 of 3
Product Name: Sika?Primer 209
Date of Issue: February `02
Do not store or consume food, drink or tobacco in an area where
they may become contaminated with this material. Wash
thoroughly before eating, smoking, applying cosmetics etc.
FLAMMABILITY: Fight fire with foam, dry chemical or CO2 extinguishers. Use
water spray to cool structures. Contain runoff. Self-contained
breathing apparatus should be used for fire fighters.
SAFE HANDLING INFORMATION
STORAGE & TRANSPORT: Store in an approved container out of direct sunlight and away
from sources of ignition.
Consult relevant State Regulations regarding storage facilities and
quantities. Consult the Australian Code for the Transport of
Dangerous Goods regarding transport requirements.
Dangerous Goods Class:3
UN Number: 1866
Proper Shipping Name - Resin solution
Packing Group: II
Hazchem Code: 3[Y]E
Emergency Procedure Guide: 3A1
SPILLS & DISPOSAL: Spillage should be absorbed in sand or a dry absorbent and
disposed of in accordance with State Waste Disposal Authority
guidelines.
FIRE/EXPLOSION HAZARD: Fight fires with foam, dry chemical and cool surrounding structures
with water. Contain runoff. Do not allow to enter sewers or storm
water system.
OTHER INFORMATION: None available
CONTACT POINT: Responsible Care Co-ordinator or Laboratory Manager
(02) 9725 1145 (AUS)
Operations Manager (09) 828 7002 or (09) 820 1432 (NZ)