Chemical Analysis Toxic Analysis Chemical Substance Property Information, Catalog of Supplier Manufacturer Distributor And Custom Synthesis Oganic Synthesis Bio-synthesis Companies For Raw Material Laboratory Reagent Equipment Solution Intermediate Specialty Chemicals And So On.

Search   
MSDS  
:
 2-Bromo-4-methylaniline, 98%
CAS  
:
 583-68-6
SYNONYMS  
:
 2-Bromo-p-toluidine; 4-Methyl-2-bromoaniline.

Section 1 - Chemical Product and Company Identification
MSDS Name: 2-Bromo-4-methylaniline, 98%
Catalog Numbers: AC154240100, AC154240500
Synonyms:
2-Bromo-p-toluidine; 4-Methyl-2-bromoaniline.
Company Identification:

              Acros Organics N.V.
              One Reagent Lane
              Fair Lawn, NJ 07410
For information in North America, call: 800-ACROS-01
For emergencies in the US, call CHEMTREC: 800-424-9300

Section 2 - Composition, Information on Ingredients

CAS# Chemical Name Percent EINECS/ELINCS
583-68-6 2-Bromo-4-methylaniline 98 209-515-7

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Appearance: clear brown liquid.
Warning! Causes eye, skin, and respiratory tract irritation. May cause central nervous system depression. May cause cardiac disturbances. May cause methemoglobinemia.
Target Organs: Blood, central nervous system, cardiovascular system, blood forming organs.


Potential Health Effects
Eye: Causes eye irritation. May cause chemical conjunctivitis.
Skin: Causes skin irritation.
Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause methemoglobinemia, cyanosis (bluish discoloration of skin due to deficient oxygenation of the blood), convulsions, and death. May cause central nervous system depression. May cause cardiac abnormalities.
Inhalation: Causes respiratory tract irritation. May cause methemoglobinemia, cyanosis (bluish discoloration of skin due to deficient oxygenation of the blood), convulsions, tachycardia, dyspnea (labored breathing), and death. May cause cardiac abnormalities. Can produce delayed pulmonary edema.
Chronic: May cause methemoglobinemia, which is characterized by chocolate-brown colored blood, headache, weakness, dizziness, breath shortness, cyanosis (bluish skin due to deficient oxygenation of blood), rapid heart rate, unconsciousness and possible death. Effects may be delayed.

Section 4 - First Aid Measures


Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion: Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation: Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician: Treat symptomatically and supportively. For methemoglobinemia, administer oxygen alone or with Methylene Blue depending on the methemoglobin concentration in the blood.
Antidote: Methylene blue, alone or in combination with oxygen is indicated as a treatment in nitrite induced methemoglobinemia.

Section 5 - Fire Fighting Measures


General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated.
Extinguishing Media: For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. Cool containers with flooding quantities of water until well after fire is out.
Flash Point: > 112 deg C (> 233.60 deg F)
Autoignition Temperature: Not applicable.
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: (estimated) Health: 2; Flammability: 1; Instability: 0

Section 6 - Accidental Release Measures


General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.

Section 7 - Handling and Storage


Handling: Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse.
Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - Exposure Controls, Personal Protection


Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
2-Bromo-4-methylaniline none listed none listed none listed

OSHA Vacated PELs: 2-Bromo-4-methylaniline: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - Physical and Chemical Properties


Physical State: Liquid
Appearance: clear brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: 6.4
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: 240 deg C @ 760.00mmHg
Freezing/Melting Point:14.00 - 16.00 deg C
Decomposition Temperature:Not available.
Solubility: Not available.
Specific Gravity/Density:1.5000g/cm3
Molecular Formula:C7H8BrN
Molecular Weight:186.05

Section 10 - Stability and Reactivity


Chemical Stability: Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid: Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials: Oxidizing agents.
Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen bromide, nitrogen.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information


RTECS#:      
CAS# 583-68-6: XU4300000
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 583-68-6: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.
Mutagenicity: No information available.
Neurotoxicity: No information available.
Other Studies:

Section 12 - Ecological Information

No information available.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

US DOT Canada TDG
Shipping Name: TOXIC LIQUIDS, ORGANIC, N.O.S. TOXIC LIQUID ORGANIC NOS (2-BROMO-4-METHYLANILINE)
Hazard Class: 6.1 6.1
UN Number: UN2810 UN2810
Packing Group: III II

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 583-68-6 is listed on the TSCA inventory.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
     This material does not contain any hazardous air pollutants.
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA.
     None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 583-68-6 is not present on state lists from CA, PA, MN, MA, FL, or NJ.

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
     XI
Risk Phrases:

     R 33 Danger of cumulative effects.
     R 36/37/38 Irritating to eyes, respiratory system and skin.

Safety Phrases:

     S 24/25 Avoid contact with skin and eyes.

WGK (Water Danger/Protection)

     CAS# 583-68-6: No information available.
Canada - DSL/NDSL
     CAS# 583-68-6 is listed on Canada's NDSL List.
Canada - WHMIS
     This product has a WHMIS classification of D2B.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List

Section 16 - Additional Information

MSDS Creation Date: 9/02/1997
Revision #6 Date: 1/11/2006

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

ALL Chemical Analysis PAGES IN THIS GROUP
NAMECAS
4-Fluoro-2-nitrotoluene, 98% 446-10-6
N-Carbethoxy-4-Piperidone, 97+% 29976-53-2
3-Methylhippuric acid 27115-49-7
Amberlite cg-400 ion-exchange resin 37247-87-3
3-Nitrotoluene, 99% 99-08-1
1,3-Diphenylguanidine 102-06-7
2-Bromo-4-methylaniline, 98% 583-68-6
2,2'-Bithiophene 492-97-7
5,6-Dimethylbenzimidazole, 99+% 582-60-5
4-Butoxyaniline, 99% (titr.) 4344-55-2
Alpha-Cyano-O-Tolunitrile, Tech. 3759-28-2
DL-Laudanosoline Hydrobromide Trihydrate, 98% 485-33-6
4-Chloro-6-Nitro-Meta-Cresol, 99% 7147-89-9
2-Butanone oxime, 99% 96-29-7
Hexachloropropene, 96% 1888-71-7
Isopropyl Chloroacetate, 99% 105-48-6
3-Methylpentane 96-14-0
1,4-Cyclohexanedicarboxylic Acid, 96% (Titr.) 1076-97-7
Azoxybenzene, 97% 495-48-7
l-(+)-Lactic acid, lithium salt 27848-80-2
4-Hexylresorcinol, 99% 136-77-6
Tantalum (V) Chloride, 99.9% 7721-01-9
2,4,5-Trimethylthiazole, 99% 13623-11-5
Cycloheptane, 99% 291-64-5
Phenylglyoxal monohydrate, 97% 1074-12-0
Ethyl carbazate 4114-31-2
bis(Methylthio)methane, 99+% 1618-26-4
1-Bromo-4-tert-butylbenzene 3972-65-4
(S)-(+)-2-Amino-2-methylbutanoic acid monohydrate, 99+% (>99% e.e.) Not available
2-Furonitrile, 99% 617-90-3
l-Adrenaline, 97% (titr.) 51-43-4
4-(3-Methyl-5-oxo-2-pyrazolin-1-yl)benzoic acid, 98+% 60875-16-3
Fluorobenzene, 99% 462-06-6
2-Mercaptopyridine, 99% 2637-34-5
DL-4-Hydroxy-3-methoxyphenylglycol, piperazine salt 67423-45-4
4'-Aminopropiophenone, 99% (Titr.) 70-69-9
2-Nitro-5-thiocyanatobenzoic acid, 98% 30211-77-9
1-Eicosanol, 98% 629-96-9
Lithium bis(trimethylsilyl)amide, 1.3M solution in THF 4039-32-1
Methyl 4,4-Dimethyl-3-Oxovalerate, 98% (GC) 55107-14-7
Ruthenocene 1287-13-4
2,4-Dinitrobenzaldehyde, 97% 528-75-6
4-Nonylphenol, 99% (GC), Mixture of Isomers 104-40-5
Cis-1,2-Dihydro-3-Methylcatechol, 20w/v % Soln. in Ethyl Acetate, Stab. with 0.2% TEA 25506-13-2
4-Hydroxy-3-Methoxybenzoic Acid, 98.5+% (HPLC) 121-34-6
4-Methyl-2,3,5,6-tetrafluorothiophenol 98+% (GC) 13634-89-4
?5-Cyclodextrin hydrate 91464-90-3
Ammonium hexachloroplatinate(IV), 99.999% 16919-58-7
20-(Hydroxymethyl)pregna-1,4-dien-3-one, 95% 35525-27-0
N,N-Dimethylguanidine sulfate 598-65-2



HBCChem,Inc

Chemical Information Net Copyright Reserved