Patent Pending
MICRO-FAZE庐 K
Dry Film Interface Material
Product Code: 52047
AOS Thermal Compounds, LLC
TECHNICAL DATA SHEET*
THERMALLY CONDUCTIVE, ELECTRICAL INSULATOR
Product Description
MICRO-FAZE庐 K is a revolutionary thermal interface
film formulated with non-silicone thermal grease. It
was developed by AOS to offer the lowest thermal
resistance in a thermal interface without the mess of
grease. MICRO-FAZE K is a die-cut polymide
insulating substrate coated on both sides with specially
formulated thermal grease (non-silicone, non-wax-based)
that is naturally tacky but dry to the touch. It offers
unique heat transfer and high insulating capabilities, and
has a high cut-through resistance.
Product Features & Benefits
Available Configurations
鈥? MICRO-FAZE K retains all the unique advantages of
MICRO-FAZE K is available in rolls and can be die-cut
thermal grease but in the form of a thermal interface
to your exact specifications.
film.
鈥? Unlike phase change materials, MICRO-FAZE K
requires minimum force to achieve total interface
Typical Properties
contact and heat transfer starts at 25潞C.
鈥? MICRO-FAZE K allows for total 鈥渨etting action鈥?
Test
to fill all microscopic surface voids without changing Physical Properties Value
Method
phase.
Substrate Kapton庐 -----
鈥? A positive coefficient of thermal expansion increases
the wetting action for total interface contact. Substrate Thickness, in. 0.002 -----
鈥? Offers maximum heat transfer capability and Compound Thickness/side, in. 0.002 -----
electrical isolation for power components. Total Thickness, in. 0.006 -----
鈥? Excellent replacement for phase change materials and
Thermal & Electrical Properties
silicone pads.
ASTM D-5470
鈥? Thermal Resistance, 掳C in2/W
MICRO-FAZE K is a 鈥渄rop-in-place鈥? product for 0.03 (modified)
easy handling in a manufacturing environment. ASTM D-149
Dielectric Strength, V/mil (VAC) 2000 (12000)
鈥? Naturally tacky film improves thermal performance
ASTM D-150
Dielectric Constant, @ 1 KHz 3.7
and does not compromise thermal resistance. 15 ASTM D-257
Volume Resistivity, ohm-cm 1.01 x 10
鈥? Microscopically changes to fill all microscopic voids
on part surfaces.
*Preliminary Technical Data Sheet
鈥? Thixotropic nature prevents run out. Micro-faze庐 is a registered Trademark of AOS
Kapton庐 is a registered Trademark of Dupont
Please know that customers are responsible for testing AOS Thermal Compounds materials for their proposed use. Any information furnished by AOS Thermal Compounds and
its agents is believed to be reliable, but AOS Thermal Compounds does not guarantee the results to be accurate and makes no warranties as to the fitness, merchantability, or
suitability of any AOS material or product for any specific or general use and shall not be held liable for incidental or consequential damages of any kind. (040201)
22 Meridian Road, Suite 6, Eatontown, NJ 07724
(732) 389-5514 鈥? fax (732) 389-6380 鈥? e-mail sales@aosco.com 鈥? web http://www.aosco.com
|