MATERIAL SAFETY DATA SHEET
LEAD ACID BATTERY WET, FILLED WITH
ACID
(US, CN, EU Version for International Trade)
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Lead Acid Battery Wet, Filled With Acid
Electric Storage Battery, SLI or Industrial Battery, UN2794
OTHER PRODUCT
NAMES:
East Penn Manufacturing Company, Inc.
MANUFACTURER:
Deka Road
DIVISION:
Lyon Station, PA 19536 USA
ADDRESS:
US: CHEMTREC 1-800-424-9300
EMERGENCY TELEPHONE NUMBERS:
CN: CHEMTREC 1-800-424-9300
Outside US: +1-202-483-7616
+1-610-682-6361
NON-EMERGENCY HEALTH/SAFETY INFORMATION:
This product is a wet lead acid storage battery. May also include gel/absorbed electrolye
CHEMICAL FAMILY:
type lead acid battery types.
Industrial/Commercial electrical storage batteries.
PRODUCT USE:
This product is considered a Hazardous Substance, Preparation or Article that is regulated under US-OSHA; CAN-WHMIS;
IOSH; ISO; UK-CHIP; or EU Directives (67/548/EEC-Dangerous Substance Labeling, 98/24/EC-Chemical Agents at Work,
99/45/EC-Preparation Labeling, 2001/58/EC-MSDS Content, and 1907/2006/EC-REACH), and an MSDS/SDS is required for
this product considering that when used as recommended or intended, or under ordinary conditions, it may present a health
and safety exposure or other hazard.
Additional Information
This product may not be compatible with all environments, such as those containing liquid solvents or extreme temperature or
pressure. Please request information if considering use under extreme conditions or use beyond current product labeling.
SECTION 2: HAZARDS IDENTIFICATION
GHS Classification:
Health Environmental Physical
Acute Toxicity 鈥? Not listed (NL) Aquatic Toxicity 鈥? NL NFPA 鈥? Flammable gas, hydrogen (during
Eye Corrosion 鈥? Corrosive* charging)
Skin Corrosion 鈥? Corrosive* CN - NL
Skin Sensitization 鈥? NL EU - NL
Mutagenicity/Carcinogenicity 鈥? NL
Reproductive/Developmental 鈥? NL
Target Organ Toxicity (Repeated) 鈥? NL
*as sulfuric acid
GHS Label: Lead Acid Battery, Wet
C (Corrosive)
Symbols:
Hazard Statements Precautionary Statements
Contact with internal components may cause irritation of Keep out of reach of children. Keep containers tightly closed.
severe burns. Irritating to eyes, respiratory system, and Avoid heat, sparks, and open flame while charging batteries.
skin. Avoid contact with internal acid.
May form explosive air/gas mixture during charging. Contact with internal components
EMERGENCY OVERVIEW:
may cause irritation or severe burns. Irritating to eyes, respiratory system, and skin.
PAGE 1 OF 8 East Penn Manufacturing Co., Inc.
MATERIAL SAFETY DATA SHEET
LEAD ACID BATTERY WET, FILLED WITH
ACID
(US, CN, EU Version for International Trade)
Prolonged inhalation or ingestion may result in serious damage to health. Pregnant
women exposed to internal components may experience reproductive/developmental
effects.
POTENTIAL HEALTH EFFECTS:
EYES: Direct contact of internal electrolyte liquid with eyes may cause severe burns or blindness.
SKIN: Direct contact of internal electrolyte liquid with the skin may cause skin irritation or damaging burns.
INGESTION: Swallowing this product may cause severe burns to the esophagus and digestive tract and harmful or
fatal lead poisoning. Lead ingestion may cause nausea, vomiting, weight loss, abdominal spasms,
fatigue, and pain in the arms, legs and joints.
INHALATION: Respiratory tract irritation and possible long term effects.
ACUTE HEALTH HAZARDS:
Repeated or prolonged contact may cause mild skin irritation.
CHRONIC HEALTH HAZARDS:
Lead poisoning if persons are exposed to internal components of the batteries. Lead absorption may cause nausea,
vomiting, weight loss, abdominal spasms, fatigue, pain in the arms, legs and joints. Other effects may include central nervous
system damage, kidney dysfunction, and potential reproductive effects. Chronic inhalation of sulfuric acid mist may increase
the risk of lung cancer.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
Respiratory and skin diseases may predispose one to acute and chronic effects of sulfuric acid and/or lead. Children and
pregnant women must be protected from lead exposure. Persons with kidney disease may be at increased risk of kidney
failure.
Additional Information
No health effects are expected related to normal use of this product as sold.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENTS (Chemical/Common Names): CAS No.: % by Wt: EC No.:
Lead, inorganic 7439-92-1 43-70 (average: 65) 231-100-4
Sulfuric acid 7664-93-9 20-44 (average: 25) 231-639-5
Antimony 7440-36-0 0-4 (average: 1) 231-146-5
Arsenic 7440-38-2 <0.01 231-148-6
Polypropylene 9003-07-0 5-10 (average: 8) NA
NA 鈥? Not applicable/ND 鈥? Not determined
Additional Information
These ingredients reflect components of the finished product related to performance of the product as distributed into
commerce.
SECTION 4: FIRST AID MEASURES
Flush eyes with large amounts of water for at least 15 minutes. Seek immediate medical attention if
EYE CONTACT:
eyes have been exposed directly to acid.
Flush affected area(s) with large amounts of water using deluge emergency shower, if available,
SKIN CONTACT:
shower for at least 15 minutes. Remove contaminated clothing. If symptoms persist, seek medical
attention.
If swallowed, give large amounts of water. Do NOT induce vomiting or aspiration into the lungs may
INGESTION:
occur and can cause permanent injury or death.
If breathing difficulties develop, remove person to fresh air. If symptoms persist, seek medical
INHALATION:
attention.
SECTION 5: FIRE-FIGHTING MEASURES
SUITABLE/UNSUITABLE EXTINGUISHING MEDIA:
PAGE 2 OF 8 East Penn Manufacturing Co., Inc.
MATERIAL SAFETY DATA SHEET
LEAD ACID BATTERY WET, FILLED WITH
ACID
(US, CN, EU Version for International Trade)
Dry chemical, carbon dioxide, water, foam. Do not use water on live electrical circuits.
SPECIAL FIRE FIGHTING PROCEDURES & PROTECTIVE EQUIPMENT:
Use appropriate media for surrounding fire. Do not use carbon dioxide directly on cells. Avoid breathing vapors. Use full
protective equipment (bunker gear) and self-contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Batteries evolve flammable hydrogen gas during charging and may increase fire risk in poorly ventilated areas near sparks,
excessive heat or open flames.
SPECIFIC HAZARDS IN CASE OF FIRE:
Thermal shock may cause battery case to crack open. Containers may explode when heated.
Additional Information
Firefighting water runoff and dilution water may be toxic and corrosive and may cause adverse environmental impacts.
SECTION 6: ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS:
Avoid Contact with Skin. Neutralize any spilled electrolyte with neutralizing agents, such as soda ash, sodium bicarbonate, or
very dilute sodium hydroxide solutions.
ENVIRONMENTAL PRECATIONS:
Prevent spilled material from entering sewers and waterways.
SPILL CONTAINMENT & CLEANUP METHODS/MATERIALS:
Add neutralizer/absorbent to spill area. Sweep or shovel spilled material and absorbent and place in approved container.
Dispose of any non-recyclable materials in accordance with local, state, provincial or federal regulations.
Additional Information
Lead acid batteries and their plastic cases are recyclable. Contact your East Penn representative for recycling
information.
SECTION 7: HANDLING AND STORAGE
PRECAUTIONS FOR SAFE HANDLING AND STORAGE:
鈥? Keep containers tightly closed when not in use.
鈥? If battery case is broken, avoid contact with internal components.
鈥? Do not handle near heat, sparks, or open flames.
鈥? Protect containers from physical damage to avoid leaks and spills.
鈥? Place cardboard between layers of stacked batteries to avoid damage and short circuits.
鈥? Do not allow conductive material to touch the battery terminals. A dangerous short-circuit may occur and cause battery
failure and fire.
OTHER PRECAUTIONS (e.g.; Incompatibilities):
Keep away from combustible materials, organic chemicals, reducing substances, metals, strong oxidizers and water.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS/SYSTEM DESIGN INFORMATION:
Charge in areas with adequate ventilation.
VENTILATION:
General dilution ventilation is acceptable.
RESPIRATORY PROTECTION:
Not required for normal conditions of use. See also special firefighting procedures (Section 5).
EYE PROTECTION:
Wear protective glasses with side shields or goggles.
SKIN PROTECTION:
Wear chemical resistant gloves as a standard procedure to prevent skin contact.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Chemically-impervious apron and face shield recommended when
adding water or electrolyte to batteries.
Wash Hands after handling.
PAGE 3 OF 8 East Penn Manufacturing Co., Inc.
MATERIAL SAFETY DATA SHEET
LEAD ACID BATTERY WET, FILLED WITH
ACID
(US, CN, EU Version for International Trade)
EXPOSURE GUIDELINES & LIMITS:
3
OSHA Permissible Exposure Limit (PEL/TWA) Lead, inorganic (as Pb) 0.05 mg/m
3
Sulfuric acid 1 mg/m
3
Antimony 0.5 mg/m
3
Arsenic 0.01 mg/m
3
ACGIH 2007 Threshold Limit Value (TLV) Lead, inorganic (as Pb) 0.05 mg/m
3
Sulfuric acid 0.2 mg/m
3
Antimony 0.5 mg/m
3
Arsenic 0.01 mg/m
3
Quebec Permissible Exposure Value (PEV) Lead, inorganic (as Pb) 0.15 mg/m
3
Sulfuric acid 1 mg/m TWA
3
3 mg/m STEV
3
Antimony 0.5 mg/m
3
Arsenic 0.1 mg/m
3
Ontario Occupational Exposure Level (OEL) Lead (designated substance) 0.10 mg/m
3
Sulfuric acid 1 mg/m TWAEV
3
3 mg/m STEV
3
Antimony 0.5 mg/m
3
Arsenic (designated 0.01 mg/m
substance)
3
Netherlands Maximaal Aanvaarde Concentratie (MAC) Lead, inorganic (as Pb) 0.15 mg/m
3
Sulfuric acid 1 mg/m
3
Germany Maximale Arbeitsplatzkonzentrationen (MAK) Lead, inorganic (as Pb) 0.1 mg/m
3
Sulfuric acid 1 mg/m TWA
3
2 mg/m STEL
3
Antimony 0.5 mg/m
3
United Occupational Exposure Standard (OES) Lead 0.15 mg/m
3
Kingdom Antimony 0.5 mg/m
3
Arsenic 0.1 mg/m
TWA 鈥? 8-Hour Time Weighted Average/ STE 鈥? Short Term Exposure / mg/m3 鈥? milligrams per cubic meter of air/ NE 鈥? Not Established
Additional Information
鈥? Batteries are housed in polypropylene cases which are regulated as total dust or respirable dust only when they are
3 3
ground up during recycling. The OSHA PEL for dust is 15 mg/m as total dust or 5 mg/m as respirable dust.
鈥? May be required to meet Domestic Requirements for a Specific Destination(s).
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Industrial/commercial lead acid battery
APPEARANCE:
Odorless
ODOR:
NA
ODOR THRESHOLD:
Sulfuric Acid: Liquid; Lead: solid
PHYSICAL STATE:
<1
pH:
235-240掳 F (as sulfuric acid)
BOILING POINT:
NA
MELTING POINT:
NA
FREEZING POINT:
10 mmHg
VAPOR PRESSURE:
>1
VAPOR DENSITY (AIR = 1):
1.27鈥?1.33
SPECIFIC GRAVITY (H2O = 1):
<1
EVAPORATION RATE (n-BuAc=1):
100% (as sulfuric acid)
SOLUBILITY IN WATER:
Below room temperature (as hydrogen gas)
FLASH POINT:
NA
AUTO-IGNITION TEMPERATURE:
4% (as hydrogen gas)
LOWER EXPLOSIVE LIMIT (LEL):
74% (as hydrogen gas)
UPPER EXPLOSIVE LIMIT (UEL):
NA
PARTITION COEFFICIENT:
Not Available
VISCOSITY (poise @ 25掳 C):
PAGE 4 OF 8 East Penn Manufacturing Co., Inc.
MATERIAL SAFETY DATA SHEET
LEAD ACID BATTERY WET, FILLED WITH
ACID
(US, CN, EU Version for International Trade)
Not Available
DECOMPOSITION TEMPERATURE:
FLAMMABILITY/HMIS HAZARD CLASSIFICATIONS (US/CN/EU): As sulfuric acid
HEALTH: 3 FLAMMABILITY: 0 REACTIVITY: 2
SECTION 10: STABILITY AND REACTIVITY
This product is stable under normal conditions at ambient temperature.
STABILITY:
Strong bases, combustible organic materials, reducing agents, finely
INCOMPATIBILITY (MATERIAL TO AVOID):
divided metals, strong oxidizers, and water.
Thermal decomposition will produce sulfur dioxide, sulfur trioxide,
HAZARDOUS DECOMPOSITION BY-
carbon monoxide, sulfuric acid mist, and hydrogen.
PRODUCTS:
Will not occur
HAZARDOUS POLYMERIZATION:
Overcharging, sources of ignition
CONDITIONS TO AVOID:
SECTION 11: TOXICOLOGICAL INFORMATION
ACUTE TOXICITY (Test Results Basis and Comments):
Sulfuric acid: LD50, Rat: 21409 mg/kg
3
LC50, Guinea pig: 510 mg/m
Lead: No data available for elemental lead
SUBCHRONIC/CHRONIC TOXICITY (Test Results and Comments):
Repeated exposure to lead and lead compounds in the workplace may result in nervous system toxicity. Some toxicologists
report that abnormal conduction velocities in person with blood lead levels of 50 碌g/100 ml or higher. Heavy lead exposure
may result in central nervous system damage, encephalopathy and damage to the blood-forming (hematopoietic) tissues.
Additional Information
鈥? Very little chronic toxicity data available for elemental lead.
鈥? Lead is listed by IARC as a 2B carcinogen: possible carcinogen in humans. Arsenic is listed by IARC, ACGIH, and NTP
as a carcinogen, based on studies with high doses overlong periods of time. The other ingredients in this product,
present at equal to or greater than 0.1% of the product, are not listed by OSHA, NTP, or IARC as suspect carcinogens.
th
鈥? The 19 Amendment to EC Directive 67/548/EEC classified lead compounds, but not lead in metal form, as possibly toxic
to reproduction. Risk phrase 61: May cause harm to the unborn child, applies to lead compounds, especially soluble
forms.
SECTION 12: ECOLOGICAL INFORMATION
PERSISTENCE & DEGRADABILITY:
Lead is very persistent in soils and sediments. No data available on biodegradation.
BIO-ACCUMULATIVE POTENTIAL (Including Mobility):
Mobility of metallic lead between ecological compartments is low. Bioaccumulation of lead occurs in aquatic and terrestrial
animals and plants, but very little bioaccumulation occurs through the food chain. Most studies have included lead
compounds, not solid inorganic lead.
AQUATIC TOXICITY (Test Results & Comments):
Sulfuric acid: 24-hour LC50, fresh water fish (Brachydanio rerio): 82 mg/l
96-hour LOEC, fresh water fish (Cyprinus carpio): 22 mg/l (lowest observable effect concentration)
Lead (metal): No data available
Additional Information
鈥? No known effects on stratospheric ozone depletion.
鈥? Volatile organic compounds: 0% (by Volume)
鈥? Water Endangering Class (WGK): NA
SECTION 13: DISPOSAL CONSIDERATIONS
Follow local, State/Provincial, and Federal/National regulations applicable to as-used, end-
WASTE DISPOSAL
of-life characteristics to be determined by end-user.
METHOD:
PAGE 5 OF 8 East Penn Manufacturing Co., Inc.
MATERIAL SAFETY DATA SHEET
LEAD ACID BATTERY WET, FILLED WITH
ACID
(US, CN, EU Version for International Trade)
HAZARDOUS WASTE
US - Not applicable to finished product as manufactured for distribution into commerce.
CLASS/CODE:
CN 鈥? Not applicable to finished product as manufactured for distribution into commerce.
EWC 鈥? Not applicable to finished product as manufactured for distribution into commerce.
Additional Information
Not Included 鈥? Recycle or dispose as allowed by local jurisdiction for the end-of-life characteristics as-disposed.
SECTION 14: TRANSPORT INFORMATION
GROUND 鈥? US-DOT/CAN-TDG/EU-ADR/APEC-ADR:
Proper Shipping Name Batteries, Wet, Filled with Acid
Hazard Class 8 ID Number UN2794
Packing Group III Labels Corrosive
AIRCRAFT 鈥? ICAO-IATA:
Proper Shipping Name Batteries, Wet, Filled with Acid
Hazard Class 8 ID Number UN2794
Packing Group II Labels Corrosive
Reference IATA packing instructions 800
VESSEL 鈥? IMO-IMDG:
Proper Shipping Name Batteries, Wet, Filled with Acid
Hazard Class 8 ID Number UN2794
Packing Group III Labels Corrosive
Reference IMDG packing instructions P801
Additional Information
Transport requires proper packaging and paperwork, including the Nature and Quantity of goods, per applicable
origin/destination/customs points as-shipped.
SECTION 15: REGULATORY INFORMATION
INVENTORY STATUS:
All components are listed on the TSCA; EINECS/ELINCS; and DSL, unless noted otherwise below.
U.S. FEDERAL REGULATIONS:
TSCA Section 8b 鈥? Inventory Status: All chemicals comprising this product are either exempt or listed on the TSCA
Inventory.
TSCA Section 12b 鈥? Export Notification: If the finished product contains chemicals subject to TSCA Section 12b export
notification, they are listed below:
Chemical CAS #
None NA
CERCLA (COMPREHENSIVE RESPONSE COMPENSATION, AND LIABILITY ACT)
Chemicals present in the product which could require reporting under the statute:
Chemical CAS #
Lead 7439-92-1
Sulfuric acid 7664-93-9
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT)
The finished product contains chemicals subject to the reporting requirements of Section 313 of SARA Title III.
Chemical CAS # % wt
65
Lead 7439-92-1
25
Sulfuric acid 7664-93-9
CERCLA SECTION 311/312 HAZARD CATEGORIES: Note that the finished product is exempt from these regulations,
but lead and sulfuric acid above the thresholds are reportable on Tier II reports.
Fire Hazard No
Pressure Hazard No
Reactivity Hazard No
Immediate Hazard Yes (Sulfuric acid is Corrosive)
PAGE 6 OF 8 East Penn Manufacturing Co., Inc.
MATERIAL SAFETY DATA SHEET
LEAD ACID BATTERY WET, FILLED WITH
ACID
(US, CN, EU Version for International Trade)
Delayed Hazard No
Note: Sulfuric acid is listed as an Extremely Hazardous Substance.
STATE REGULATIONS (US):
California Proposition 65
The following chemicals identified to exist in the finished product as distributed into commerce are known to the State of
California to cause cancer, birth defects, or other reproductive harm:
Chemical CAS # % Wt
Arsenic (as arsenic oxides) 7440-38-2 <0.1
Strong inorganic acid mists including NA 25
sulfuric acid
Lead 7439-92-1 65
California Consumer Product Volatile Organic Compound Emissions
This Product is not regulated as a Consumer Product for purposes of CARB/OTC VOC Regulations, as-sold for the intended
purpose and into the industrial/Commercial supply chain.
INTERNATIONAL REGULATIONS (Non-US):
Canadian Domestic Substance List (DSL)
All ingredients remaining in the finished product as distributed into commerce are included on the Domestic Substances
List.
WHMIS Classifications
Class E: Corrosive materials present at greater than 1%
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all the information required by the Controlled Products Regulations.
NPRI and Ontario Regulation 127/01
This product contains the following chemicals subject to the reporting requirements of Canada NPRI +/or Ont. Reg.
127/01:
Chemical CAS # % Wt
Lead 7439-92-1 65
Sulfuric acid 7664-93-9 25
European Inventory of Existing Commercial Chemical Substances (EINECS)
All ingredients remaining in the finished product as distributed into commerce are exempt from, or included on, the
European Inventory of Existing Commercial Chemical Substances.
European Communities (EC) Hazard Classification according to directives 67/548/EEC and 1999/45/EC.
R-Phrases S-Phrases
35, 36, 38 1/2, 26, 30, 45
Additional Information
This product may be subject to Restriction of Hazardous Substances (RoHS) regulations in Europe and China, or may be
regulated under additional regulations and laws not identified above, such as for uses other than described or as-
designed/as-intended by the manufacturer, or for distribution into specific domestic destinations.
SECTION 16: OTHER INFORMATION
OTHER INFORMATION:
Distribution into Quebec to follow Canadian Controlled Product Regulations (CPR) 24(1) and 24(2).
Distribution into the EU to follow applicable Directives to the Use, Import/Export of the product as-sold.
SOURCES OF INFORMATION:
International Agency for Research on Cancer (1987), IARC Monographs on the Evaluation of Carcinogenic Risks to Humans:
Overall Evaluations of Carcinogenicity: An updating of IARC Monographs Volumes 1-42, Supplement 7, Lyon, France.
Ontario Ministry of Labour Regulation 654/86. Regulations Respecting Exposure to Chemical or Biological Agents.
RTECS 鈥? Registry of Toxic Effects of Chemical Substances, National institute for Occupational Safety and Health.
MSDS/SDS PREPARATION INFORMATION:
DATE OF ISSUE: 6 August 2007 SUPERCEDES: 29 January 2007
DISCLAIMER:
This Material Safety Data Sheet is based upon information and sources available at the time of preparation or revision date.
Information in the MSDS was obtained from sources which we believe are reliable, but are beyond our direct supervision or
PAGE 7 OF 8 East Penn Manufacturing Co., Inc.
MATERIAL SAFETY DATA SHEET
LEAD ACID BATTERY WET, FILLED WITH
ACID
(US, CN, EU Version for International Trade)
control. We make no Warranty of Merchantability, Fitness for any particular purpose or any other Warranty, Expressed or
Implied, with respect to such information and we assume no liability resulting from its use. For this and other reasons, we do
not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected
with the handling, storage, use or disposal of the product. It is the obligation of each user of this product to determine the
suitability of this product and comply with the requirements of all applicable laws regarding use and disposal of this product.
For additional information concerning East Penn Manufacturing Co., Inc. products or questions concerning the content of this
MSDS please contact your East Penn representative.
END
PAGE 8 OF 8 East Penn Manufacturing Co., Inc.
|