HMIS DATA
HEALTH 2 0= MINIMAL
MATERIAL SAFETY DATA SHEET
FIRE 0 1= SLIGHT
COIL KLEEN REACTIVITY 1 2= MODERATE
Catalog No.: SCM-706 3= HIGH
SECTION I-IDENTIFICATION
4= EXTREME
MANUFACTURED BY: Specialty Chemical Manufacturing
ADDRESS: 115 W. Clark Street
Quincy, FL 23251
EMERGENCY Phone No. 800-255-3924 Chem-Tel (Chemical Emergencies Only)
PHONE NUMBER FOR INFORMATION: 800-874-554 Fax: 904-366-2690
DATE REVISED: 7/11/2003
NAME OF PREPARER: ANTHONY E. JERNIGAN
SECTION II HAZARDOUS INGREDIENTS INFORMATION
INGREDIENT CAS NO OSHA ACIGH OTHER % or
PEL TLV STEL RNG
Hydrochloric acid 7647-01-1 5 ppm <20
Phosphoric acid 7664-38-2 1 ppm <10
SECTION III 鈥? PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: >212潞 F Specific gravity (H2O = 1): 1.09
Vapor pressure (mm Hg): 55 @ 77潞 F Melting Point (Pour Point): <32潞 F
Vapor Density (Air = 1): 1.27 Evaporation Rate (Water = 1): ~ 1
Solubility in water: Water miscible
Appearance and odor: Clear red liquid; astringent, acrid odor.
SECTION IV- FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): None Flammable Limits: None
Extinguishing media: Not applicable
Special Fire Fighting Procedures: Liquid and mists are irritating and corrosive. Wear full protective gear
including self-contained breathing apparatus. Keep containers cooled with a water spray if involved in a
fire.
Unusual Fire and Explosion Hazards: This product can react with metals and release hazardous
quantities of hydrogen gas.
SECTION V 鈥? REACTIVITY DATA
Stability-Stable Conditions to avoid: None
Incompatibility (Materials to avoid): Metal containers, strong oxidizers, strong alkalis
Hazardous Decomposition or Byproducts: Hydrogen gas, SO2
Hazardous Polymerization: Will not occur.
1
COIL KLEEN MSDS
SECTION VI鈥? HEALTH HAZARD DATA
Routes of Entry: Inhalation: yes (mists) Skin: yes Ingestion: yes Eyes: yes
Health Hazards (acute and chronic): This product is irritating and mildly corrosive to skin, eyes and mucuos
membranes.
Carcinogenicity: NTP? No IARC Monographs? No OSHA Regulated? No
Signs and symptoms of exposure:
Inhalation: Breathing mists or vapors may irritate irritation to throat and lungs.
Skin: Irritating. Prolonged contact may result in chemical burns.
Ingestion: Do not take internally. Irritating. May cause chemical burns to mouth throat and digestive
tract.
Eyes: May cause eye irritation, mild to severe burning, redness or tearing. Prolonged contact may
cause chemical burns or tissue damage.
Medical Conditions Aggravated by Exposure: Contact or breathing mists may exacerbate existing skin
or respiratory disorders.
Emergency and First Aid Procedures:
Eyes: Flush with water for 15 minutes while lifting the eyelids to irrigate the area behind the lid.
Consult a physician if immediately after administering first aid!
Skin: Remove contaminated clothing. Wash the affected area with soap and water. Launder or dry-
clean clothes before reuse. Discard contaminated leather articles. If burning or irritation develops or
persists, get medical attention.
Inhalation: Evacuate to a safe area with plenty of fresh air. Allow the affected individual to rest
in a well-ventilated area. If irritation persists, seek medical aid immediately.
Ingestion: DO NOT induce vomiting. Drink 3-4 glasses of water and contact the nearest poison
control center. If vomiting occurs, keep the head lower than the hips to prevent aspiration.
SECTION VII 鈥? PRECAUTIONS FOR SAFE HANDLING AND STORAGE
Steps to be taken if material is spilled or released: Wear recommended protective clothing. Remove
contaminated garments promptly. Remove unnecessary personnel from the area. Floors may be slippery;
use care to avoid falling. Dike the spill immediately with appropriate materials to prevent the spread of
liquid. Absorb the liquid with an inert absorbent such as sand, dirt, vermiculite or 鈥渙il-dri鈥?, or use commercial
absorbent pads. Transfer liquids and solid diking material to suitable containers, and dispose of in
accordance with local, state, and federal regulations.
DO NOT contaminate municipal sewers or other open bodies of water with runoff.
Waste disposal methods: Bury in an approved landfill in accordance with governmental regulations, or
consign recovered material to a licensed hazardous waste contractor.
Handling and storage: Avoid contact with skin and eyes. Keep containers closed when not in use. Store in
a dry, cool, well-ventilated area.
Empty containers may retain residue. All containers should be disposed of in an environmentally safe
manner, and in accordance with all governmental regulations.
Keep this and all chemicals out of the reach of children.
2
COIL KLEEN MSDS
SECTION VIII 鈥? CONTROL MEASURES
Respiratory Protection: Use in a well-ventilated area. If vapor or mist is being generated and exceeds the
TLV, use an air purifying respirator with an acid gas cartridge, and follow a respiratory program meeting
OSHA 1910.134 and ANSI Z88.2 requirements.
Ventilation: Local exhaust is recommended when used in enclosed areas.
Protective Gloves: Neoprene or other materials may be used if there is documented evidence of
compatibility. Use as necessary to prevent skin contact.
Eye protection: Wear safety glasses (ANSI Z87.1) or approved equivalent, or chemical splash goggles as
necessary to minimize eye contact hazards.
Other Protective Clothing: Neoprene aprons, overshoes, oversleeves or other impervious clothing as
necessary to minimize exposure.
Work Hygienic Practices: Use proper industrial hygiene practices to minimize hazardous exposure. Wash
hands after handling this material, and before eating or smoking.
SECTION IX 鈥? ADDITIONAL INFORMATION
Transportation Information:
DOT DESCRIPTION: Corrosive liquid, acidic, inorganic, NOS (contains hydrochloric acid and
phosphoric acid), Class 8, UN3264, PGIII
DOT HAZARD LABEL: Corrosive
TSCA: All ingredients are TSCA approved.
SARA TITLE III Reporting Requirements:
Section 302: EHS reporting not required
Section 304: Hazardous releases reporting not required
Section 311: Community Right To Know reporting is required if the inventory is above the Threshold
Planning Quantity.
Section 312: R-T-K Inventory data reporting is not required.
Section 313: Emissions and release reporting may be required for users of this product within the
manufacturing sector. This does not apply to service companies.
This information is, to the best of our knowledge and belief, accurate and reliable as of the date completed.
However no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the
user鈥檚 responsibility to satisfy himself as to the completeness and suitability of such information for his own
particular use. We do not accept liability for any loss or damage that may occur from the use of this information,
nor do we offer any warranty against patent infringement.
3
|