15230 Surveyor, Addison TX 75001
Phone: 972-692-0962 Fax: 972-692-0963
Effective Date: December 2001 Material Safety Data Sheet PANSEAL
This information applies to all PANSEAL part numbers (2000PB, PC and PG variants)
1. PRODUCT IDENTIFICATION
Trade Name: PANSEAL
Chemical Family: Epoxy
Intended Use or Product Type: Epoxy Coating
2. COMPOSITION /
Resin INFORMATION ON
INGREDIENTS
DGEBA 鈥? Novolac Epoxy Resin - CAS# 208064-14-4
OSHA Hazardous Ingredients: NA
(10%-50%)
OSHA / PEL - NE
ACGIH / TLV 鈥? NE
DGEBF 鈥? Epoxy Resin CAS#25068-38-6 (10%-50%)
Polybutadiene and Natural Rubber CAS # mixture (5% -
10%)
OSHA / PEL 鈥? NE
ACGIH / TLV - NE
Hardener
Modified Polyamidoamine CAS# mixture 20%-30%
OSHA / PEL NE
ACGIH / TLV NE
Polyamide CAS# mixture 60%-80%
OSHA / PEL NE
ACGIH / TLV NE
3. HAZARDOUS IDENTIFICATION
Emergency Overview: Toxic fumes are released in a fire situation. Harmful if swallowed.
May cause allergic skin and eye reactions.
FIRST AID MEASURES
4.
Ingestion: Resin - If large amounts are ingested, induce vomiting if conscious.
Hardener - Call physician immediately. Give generous amounts of water if
conscious. Do not induce vomiting.
Skin: Resin - Promptly wash with mild soap and water.
Hardener - Promptly wash with mild soap and water.
Inhalation: Resin - Remove to fresh air. Give oxygen if breathing is difficult.
Hardener - Remove to fresh air. Give oxygen if breathing is difficult.
Eyes: Resin - Immediately flush eyes with water for 15 minutes. Call physician.
Hardener - Immediately flush eyes with water for 15 minutes. Call physician.
Overexposure Effects: Overexposure to this material can cause chemical burns to the skin and
eyes and inhalation of vapors can cause severe respiratory irritation. Can cause allergic skin and
respiratory reactions. Can have effects on the nervous system evidenced by central nervous
system depression, tremors, paralysis, diarrhea and vasodilation. May also cause headache,
nausea and dizziness.
Medical Conditions Aggravated by Exposure: Allergy, eczema or skin conditions.
Additional Information: Promptly remove wet contaminated non-imperious clothing, wash
before reuse. Destroy contaminated leather and absorbent shoes.
FIRE FIGHTING MEASURES
5.
Resin Hardener
>300oF (149oC) >200oF (93oC)
Flash Point:
Flash Point Method Used: Closed cup
Fire Fighting Extinguishing Media: Carbon Dioxide, foam, dry chemical
Fire Fighting Equipment: Use a self-contained breathing apparatus
Fire and Explosion Hazards: Decomposition and combustion products may be toxic.
NOTE: decomposition and combustion products may be toxic
ACCIDENTAL RELEASE MEASURES
6.
Resin - Shovel into closeable container for disposal.
Hardener - Absorb into sand or other absorbent material. Shovel into closeable container
and dispose of in professional manner.
HANDLING AND STORAGE
7.
Precautions: Do not get in eyes, on skin, on clothing. Do not breathe vapor, mist or spray. Use
only with adequate ventilation. Individuals should wash thoroughly after handling. For industrial
use only.
Storage Information: Keep away from heat, sparks and open flame. Ground and bond metal
containers for liquid transfer to avoid static sparks. Store at temperatures between 2oC and 40oC
in tightly closed containers in dry area to prevent moisture and carbon dioxide contamination.
EXPOSURE CONTROLS/PERSONAL PROTECTION
8.
Personal Protective Equipment: Wear protective equipment to prevent exposure and personal
contact.
Skin Protection: Impervious gloves
Respiratory Protection: Organic chemical cartridge respirator if needed in non-vented area
Eye Protection: Splash-proof chemical goggles
Engineering Controls: Good general mechanical ventilation and local exhaust
PHYSICAL AND CHEMICAL PROPERTIES
9.
Resin Hardener
Appearance: Light Gray Reddish Amber
Odor: None Slight sweet odor
Physical State: Liquid Liquid
Solubility in Water (% by weight): Negligible Negligible
<0o F (-18o C) <0o F (-18o C)
Melting Point:
Density: 1.45 0.97
pH: ca 5 ca 10
STABILITY AND REACTIVITY
10.
Stability: Stable
Incompatibility: strong oxidizers, strong acids and bases
Hazardous Decomposition Products:
Resin: - Carbon Monoxide, Carbon Dioxide, and Phenolics
Hardener: - Carbon Monoxide, Carbon Dioxide, Phenolic Nitrogen Oxides and
Compounds
Hazardous Polymerization:
Resin - will not occur
Hardener - Do not heat in bulk as dangerous decomposition may occur, liberating toxic
fumes.
TOXICOLOGICAL INFORMATION
11.
Acute Oral Effects (Ingestion):
Resin - LD50 (rabbits): 4000 mg/kg
Hardener - LD50 (rabbits): 3000 mg/kg
Sensitization: Can cause skin and respiratory sensitization
Skin Irritation: Irritant
Eye Irritation: Irritant
ECOLOGICAL INFORMATION
12.
Additional Information: Amines, in general, may be toxic to aquatic organisms. Epoxies are
only slightly soluble in water.
DISPOSAL CONSIDERATIONS
13.
Waste Disposal Method: Dispose in accordance with federal, state and local regulations.
TRANSPORT INFORMATION
14.
DOT: Not regulated
REGULATORY INFORMATION
15.
US Federal Regulations:
Occupational Safety and Health Act (OSHA): This Material Safety Data Sheet (MSDS) has
been prepared in compliance with the federal OSHA Hazard Communication Standard 29
CFR 1910.1200. This product is considered to be a hazardous chemical under that standard.
Resource Conservation and Recovery Act (RCRA): Not a hazardous waste under RCRA (40
CFR 261).
SARA Title III: Section 304 - CERCLA: Not listed.
SARA Title III: Section 313 Toxic Chemical List (TCL): This product does not contain a toxic
chemical for routine annual 鈥淭oxic Chemical Release Reporting鈥? under Sec. 313 (40 CFR
372). This information must be included in all MSDS鈥檚 that are copied and distributed for this
material.
OTHER INFORMATION
16.
This information is based on our present knowledge. However, this shall not constitute a
guarantee for any specific features and shall not establish a legally valid contractual relationship.
Contact: Dynesic Technologies, Inc., Phone: 972-692-0962 Fax: 972-692-0963
|