Material Safety Data Sheet
Section 1. Product and Company Identification
Not available
Alloy SAC 305
Common Name Code
Validation Date 2004-08-30
Metal alloy
Product type
Version number 2
Alloy LF 218
Synonym
Industrial applications: Soldering
Material Uses
AIM In Case of INFOTRAC
Supplier
Emergency (North America): (800) 535-5053
AIM
Manufacturer (International): (352) 323-3500
Section 2. Hazardous Components
CAS #
Name % by Weight Toxicity Data ( LC50/LD50, TLV)
TWA: 2 (mg/m 3) from OSHA (PEL) [United States]
1) Tin 7440-31-5 96.5
[1997] INHALATION Respirable.
TWA: 2 (mg/m 3) from ACGIH (TLV) [United States]
[1994] INHALATION Respirable.
TWA: 0.1 (mg/m 3) from ACGIH (TLV) [United States]
2) Silver 7440-22-4 3
[1994] INHALATION
Section 3. Hazards Identification
Solid.
Physical State and
Appearance
Emergency Overview WARNING!!
Avoid contact with eyes Avoid prolonged or repeated contact with skin. W ash thoroughly after
handling.
Inhalation. Ingestion.
Routes of Entry
Potential Acute Health Effects
Eyes This product may be hazardous in case of eye contact (irritant).
Skin This product may be hazardous in case of skin contact (irritant, sensitizer).
Inhalation Fumes and/or dusts produced by this product may be hazardous in case of inhalation.
Ingestion This product may be hazardous in case of ingestion.
Chronic effects: Chronic effects: Fumes and/or dusts produced by this product may be hazardous in
Potential Chronic Health
case of ingestion, of inhalation.
Effects
This product may be hazardous in case of skin contact (irritant, sensitizer), of eye contact (irritant).
Non-corrosive for skin. Non-permeator by skin.
Repeated or prolonged exposure is not known to aggravate medical condition.
Medical Conditions
Aggravated by Overexposure:
Not available.
Overexposure
/Signs/Symptoms
See Toxicological Information (section 11)
Continued on Next Page
Alloy SAC 305 Page: 2/6
Section 4. First Aid Measures
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of
Eye Contact
water for at least 15 minutes. Get medical attention.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing
Skin Contact
contaminated clothing and shoes. Cover the irritated skin with an emollient. Wash clothing before
reuse. Thoroughly clean shoes before reuse. Get medical attention.
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek
Hazardous Skin Contact
medical attention.
Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
oxygen Get medical attention.
Hazardous Inhalation Not available.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth
Ingestion
to an unconscious person. If large quantities of this material are swallowed, call a physician
immediately. Loosen tight clothing such as a collar, tie, belt or waistband.
Not available.
Hazardous Ingestion
Not available.
Notes to Physician
Section 5. Fire Fighting Measures
Flammability of the Product Non-flammable.
Not applicable.
Auto-Ignition Temperature
Not applicable.
Flash Points
Not applicable.
Flammable Limits
Not available.
Products of Combustion
Not applicable.
Fire Hazards in Presence of
Various Substances
Non-explosive in presence of open flames and sparks, of shocks.
Explosion Hazards in
Presence of Various
Substances
Not applicable.
Fire Fighting Media
and Instructions
Protective Clothing (Fire) Not applicable.
Not available.
Special Remarks on Fire
Hazards
Not available.
Special Remarks on
Explosion Hazards
Section 6. Accidental Release Measures
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning
Small Spill and Leak
by spreading water on the contaminated surface and dispose of according to local and regional
authority requirements.
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by
Large Spill and Leak
spreading water on the contaminated surface and allow to evacuate through the sanitary system. Be
careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS
and with local authorities.
Continued on Next Page
Alloy SAC 305 Page: 3/6
Section 7. Handling and Storage
Avoid contact with eyes Avoid prolonged or repeated contact with skin. W ash thoroughly after
Handling
handling.
Keep container tightly closed. Keep container in a cool, well-ventilated area.
Storage
Section 8. Exposure Controls, Personal Protection
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne
Engineering Controls
levels below recommended exposure limits. If user operations generate dust, fume or mist, use
ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection
Eyes Splash goggles.
Body Lab coat.
Respiratory Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate
respirator when ventilation is inadequate.
Hands Gloves.
Feet Not applicable.
* Note:Suggested protective clothing may not be adequate for a specific process. Consult a specialist before using.
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus
Personal Protection in Case
should be used to avoid inhalation of the product. Suggested protective clothing might not be
of a Large Spill
sufficient; consult a specialist BEFORE handling this product.
Exposure Limits
Product Name
TWA: 2 (mg/m3) from OSHA (PEL) [United States] [1997] INHALATION Respirable.
1) TIN
TWA: 2 (mg/m3) from ACGIH (TLV) [United States] [1994] INHALATION Respirable.
TWA: 0.1 (mg/m3) from ACGIH (TLV) [United States] [1994] INHALATION
2) SILVER
Consult local authorities for acceptable exposure limits.
Section 9. Physical and Chemical Properties
Solid. Not available.
Physical State and Odor
Appearance
Taste Not available.
Not applicable.
Molecular Weight
silver-grey
Color
Not applicable.
Chemical formula
Not applicable. Specific Gravity Weighted average: 7.38 (Water = 1)
pH (1% Soln/Water)
Not available.
Acid Value (IPC TM-650,
2.3.13)
Not available.
Boiling/Condensation Point
217-218 C
Melting/Freezing Point
Not available.
Critical Temperature
Vapor Pressure Not applicable.
Not available.
Vapor Density
Not available.
Volatility
Not available.
Odor Threshold
Not available.
Evaporation Rate
Continued on Next Page
Alloy SAC 305 Page: 4/6
Not available.
VOC
Not available.
Viscosity
The product is insoluble in water and oil.
LogKow
Non-ionic.
Ionicity (in Water)
Dispersion Properties Is not dispersed in cold water, hot water, methanol, diethyl ether, n-octanol, acetone.
Insoluble in cold water, hot water, methanol, diethyl ether, n-octanol, acetone.
Solubility
Physical Chemical Comments Not available.
Section 10. Stability and Reactivity
The product is stable.
Stability and Reactivity
Stable in normal conditions. Over melting point, will emit toxic tin oxides. (Tin)
Conditions of Instability
Incompatibility with Various Slightly reactive with oxidizing agents, acids, moisture.
Substances
Not available.
Hazardous Decomposition
Products
Will not occur.
Hazardous Polymerization
Not considered to be corrosive for metals and glass according to our database.
Corrosivity
Not available.
Special Remarks on
Corrosivity
Section 11. Toxicological Information
Toxic and Chronic Effects on Fumes and/or dusts produced by this product may be hazardous in case of ingestion, of inhalation.
Humans This product may be hazardous in case of skin contact (irritant, sensitizer), of eye contact (irritant).
Non-corrosive for skin. Non-permeator by skin.
CARCINOGENIC EFFECTS: Classified NONE by NIOSH [Tin]. Classified NONE by NIOSH [Silver].
Classified NONE by NIOSH [Copper].
MUTAGENIC EFFECTSNot available.
:
TERATOGENIC EFFECTSNot available.
:
DEVELOPMENTAL TOXICITYNot available.
:
The product may be toxic to kidneys, lungs, liver, mucous membranes, upper respiratory tract, skin,
eye, lens or cornea.
Repeated or prolonged exposure to the substance can produce target organs damage.
LD50: Not available.
Toxicity to Animals
LC50: Not available.
Special Remarks on Chronic Prolonged and repeated exposure to tin oxyde fumes may result in benigne pneumoconiosis
Effects on Humans (stannosis). (Tin)
Special Remarks on Other MOLTEN METAL can cause severe BURNS!
Toxic Effects on Humans Fumes and dust may irritate eyes, digestive system and respiratory tract.
(Tin)
Special Remarks on Toxicity No additional remark. (Tin)
to Animals
Continued on Next Page
Alloy SAC 305 Page: 5/6
Section 12. Ecological Information
Not available.
Ecotoxicity
Not available.
BOD5 and COD
Not available.
Biodegradable/OECD
Not available.
Mobility
Possibly hazardous short term degradation products are not likely. However, long term degradation
products may arise.
The product itself and its products of degradation are not toxic.
Toxicity of the Products of
Biodegradation
Not available.
Special Remarks on the
Products of Biodegradation
Section 13. Disposal Considerations
Waste must be disposed of in accordance with federal, state and local environmental control
Waste Information
regulations.
Not available.
Waste Stream
Consult your local or regional authorities.
Section 14. Transport Information
DOT Classification Not a DOT controlled material (United States).
Not regulated
Not applicable.
Special Provisions for
Transport
Special Provisions for
Transport
Not controlled under IMDG.
IMO/IMDG Classification
Not available.
Marine Pollutant
Not controlled under ADR (Europe).
ADR/RID Classification
Not controlled under IATA.
ICAO/IATA Classification
Section 15. Regulatory Information
Class: Sensitizing substance.
HCS Classification
Class: Target organ effects.
TSCA 8(a) PAIR: Silver
U.S. Federal Regulations
TSCA inventory: Tin; Silver; Copper
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: Tin; Silver; Copper
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: Tin: immediate health
hazard; Silver: immediate health hazard; Copper: immediate health hazard
SARA 313 toxic chemical notification and release reporting: Silver: 1%; Copper: 1%
Clean water act (CWA) 307: Silver; Copper
Clean water act (CWA) 311: No products were found.
Continued on Next Page
Alloy SAC 305 Page: 6/6
Clean air act (CAA) 112 accidental release prevention: No products were found.
Clean air act (CAA) 112 regulated flammable substances: No products were found.
Clean air act (CAA) 112 regulated toxic substances: No products were found.
State Regulations Rhode Island RTK hazardous substances: Tin
Pennsylvania RTK: Tin: (generic environmental hazard); Silver: (environmental hazard, generic
environmental hazard); Copper: (environmental hazard)
Florida: Tin; Silver
Minnesota: Tin; Silver
Michigan critical material: Silver
Massachusetts RTK: Tin; Silver; Copper
New Jersey: Tin; Silver; Copper
New Jersey spill list: Tin
California prop. 65: No products were found.
International Regulations
Not available.
EINECS
36/38- Irritating to eyes and skin.
DSCL (EEC)
43- May cause sensitization by skin contact.
Australia (NICNAS): Tin; Silver; Copper
International Lists
Korea (TCCL): Tin; Silver; Copper
Philippines (RA6969): Tin; Silver; Copper
Section 16. Other Information
Hazardous Material *1 National Fire
Health
0 Fire Hazard
Information System Protection
0
Fire Hazard
1 1
(U.S.A.) Association (U.S.A.) Health Reactivity
1
Reactivity
Specific Hazard
E
Personal Protection
Label statements
CONTAINS MATERIAL WHICH CAUSES DAMAGE TO THE FOLLOWING ORGANS: KIDNEYS, LUNGS,
LIVER, MUCOUS MEMBRANES, RESPIRATORY TRACT, SKIN, CRYSTALLINE LENS OR CORNEA.
MAY CAUSE EYE AND SKIN IRRITATION.
MAY CAUSE ALLERGIC SKIN REACTION.
Not available.
References
Not available.
Other Special
Considerations
Document
Modifications
Validated by R. Richard on 2004-08-30. Verified by R. Richard.
Printed 2004-08-30.
Information/Contact AIM
25 Kenney Drive, Rhode Island, USA, 02920
(401) 463-5605 (800) CALL AIM
Notice to Reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever
for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although
certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|