Safety Data Sheet
According to NOHSC:2011(2003)
Version: 1.0 Page: 1 of 1
Revised: 22 April 2008 MSDS No: 375
CLASSIFIED AS HAZARDOUS ACCORDING TO NOHSC CRITERIA
1. Identification of the substance/preparation and company
Product:
SikaFast 5221 Part A
Recommended use:
Adhesive
Manufacturer/supplier information:
Manufacturer/supplier: Sika Australia Pty Ltd
Street/postbox: 55 Elizabeth Street
Town/city and Post Code: WETHERILL PARK NSW 2164
Country: AUSTRALIA
Phone: (02) 9725 1145
Fax: (02) 9725 3330
General information Operations Manager
Emergency information phone: 1800 033 111
2. Hazard identification
Hazard Category:
Xi Irritant
Risk Phrase(s):
R36/37/38 ?Irritating to eyes respiratory system and skin
3. Composition/information on ingredients
Chemical characterization:
Filled acrylate
Hazardous ingredients:
Ingredient CAS No Concentration
Tetrahydrofurfuryl-methacrylate 2455-24-5 30-60%
Zinc acrylate 14643-87-9 1 -10%
Poly9oxy-1,2ethanediyl)alpha..alpha[{(4methylphenyl) 103671-44-9 1-10%
Imino}di-2,1-ethanediyl}bis[omega-hydroxy]
4. First-aid measures
Inhalation:
Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen
remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest
until fully recovered. If breathing laboured and patient cyanotic (blue), ensure airways are clear and
have a qualified person give oxygen through a facemask. If breathing has stopped apply artificial
respiration at once. In the event of cardiac arrest, apply external cardiac massage. Seek immediate
medical advise. Seek medical advice if effects persist.
Skin contact:
Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to
rinse for at least 10 minutes. Wash clothing before re-use. Clean shoes thoroughly before re-use.
Safety Data Sheet
According to NOHSC:2011(2003)
Version: 1.0 Page: 2 of 1
Revised: 22 April 2008 MSDS No: 375
Eye contact:
Immediately irrigate with copious quantities of water for 15 minutes. Eyelids to be held open. Remove
any contact lenses. Continue to rinse for at least 10 minutes. Seek medical attention.
Ingestion:
If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New
Zealand 0800 764 766). Immediately rinse mouth with water. If swallowed, do NOT induce vomiting.
Give a glass of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting
occurs give further water. Get to a doctor or hospital quickly.
Notes to physician:
In case of inhalation of decomposition products in a fire, symptoms maybe delayed. The exposed
person may need to be kept under medical surveillance for 48 hrs.
5. Fire-fighting measures
Specific hazards:
Thermal decomposition or burning may release oxides of carbon, nitrogen, and other toxic gases.
Special protective precautions and equipment:
On burning may emit toxic fumes. Fire fighters to wear self-contained breathing apparatus and suitable
protective clothing if risk of exposure to vapour or products of combustion.
Suitable extinguishing media:
If material is involved in a fire use foam, dry chemical or carbon dioxide.
6. Accidental release measures
Small Spills:
Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours. Wipe
up with absorbent (clean rag or paper towels). Collect and seal in properly labelled containers or
drums for disposal.
Large spills:
Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eye
contamination and the inhalation of vapours. Work up wind or increase ventilation. Contain - prevent
run off into drains and waterways. Use absorbent (soil, sand or other inert material). Collect and seal
in properly labelled containers or drums for disposal. If contamination of sewers or waterways has
occurred advise local emergency services.
7. Handling and storage
Handling:
Mix in a well ventilated area.
Avoid skin and eye contact and inhalation of vapour.
Storage:
Store in a cool, dry, well-ventilated place and out of direct sunlight.
Keep containers closed when not in use - check regularly for leaks.
8. Exposure controls/personal protection
National occupational exposure limits:
No exposure standards allocated.
Safety Data Sheet
According to NOHSC:2011(2003)
Version: 1.0 Page: 3 of 2
Revised: 22 April 2008 MSDS No: 375
Biological Limit Values:
As per the "National Model Regulations for the Control of Workplace Hazardous Substances [NOHSC:
1005 (1994)]" the ingredients in this material do not have a Biological Limit Allocated.
Engineering measures:
Ensure ventilation is adequate to maintain air concentrations below Exposure Standards. Use with
local exhaust ventilation or while wearing appropriate respirator. Keep containers closed when not in
use.
Personal protection equipment:
OVERALLS, SAFETY SHOES, CHEMICAL GOGGLES, GLOVES.
Wear overalls, chemical goggles and impervious gloves. Due to variations in glove construction and
local conditions, the user should make an assessment of the appropriate gloves to use. Wash hands
before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective
equipment before storing or re-using. If risk of inhalation of exists, wear organic vapour/particulate
respirator meeting the requirements of AS/NZS 1715 and AS/NZS 1716.
9. Physical and chemical propertiesAppe
Appearance:
Physical state: Liquid (paste)
Colour: White
Odour: Characteristic
Data relevant to safety:
Boiling Point(癈): 178
Flash Point (癈): 99
Vapour Pressure 0.027 kPa
PH 7
Solubility ?water Insoluble in cold water
(Typical values only - consult specification sheet)
10. Stability and reactivity
Chemical stability:
This material is thermally stable when stored and used as directed.
Conditions to avoid:
No information available
Incompatible Materials:
No information available.
Hazardous decomposition products:
Oxides of carbon and nitrogen, smoke and other toxic fumes.
Hazardous reactions:
No information available.
11. Toxicological information
No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and
the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs
are:
Safety Data Sheet
According to NOHSC:2011(2003)
Version: 1.0 Page: 4 of 3
Revised: 22 April 2008 MSDS No: 375
Acute Effects:
Inhalation: Irritating to respiratory system. Exposure to decomposition products may cause health
hazards
Skin contact: Irritating to skin
Eye contact:: Irritating to eyes.
Ingestion: Irritating to mouth throat and stomach.
Long Term Effects:
No information available for product.
Acute toxicity / Chronic toxicity:
No LD50 data available for the product.
12. Ecological information
Avoid contaminating waterways.
Ecotoxicity:
The material is harmful to aquatic organisms.
Persistence and degradability:
No information available.
Mobility:
The product is sparingly soluble in water.
13. Disposal considerations
Refer to State/Territory Land Waste Management Authority.
14. Transport information
ADG/ADR/RID
Not regulated.
IMDG
Not regulated.
IATA
Not regulated.
15. Regulatory information
Poisons Schedule (Aust):
Not regulated.
All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS).
16. Other information
Reason(s) For Issue: Revised
Material Safety Data Sheets are updated frequently. Please ensure that you have a current copy. MSDS
may be obtained from the following website: www.sika.com.au
The information contained in this Safety Date Sheet corresponds to our level of knowledge at the time of
publication. All warranties are excluded. Our most current General Sales Conditions shall apply. Please
consult the Technical Data Sheet prior to any use and processing.
|