Part of Thermo Fisher Scientific
Dimethyl Adipimidate Dihydrochloride
2. Hazards identification
Material Safety Data Sheet : No known significant effects or critical hazards.
Carcinogenicity
: No known significant effects or critical hazards.
Mutagenicity
1. Product and company identification : No known significant effects or critical hazards.
Teratogenicity
: No known significant effects or critical hazards.
Developmental effects
Dimethyl Adipimidate Dihydrochloride
Product name :
: No known significant effects or critical hazards.
Fertility effects
DIMETHYL ADIPIMIDATE DIHYDROCHLORIDE
Synonym :
: Causes damage to the following organs: upper respiratory tract, skin, eyes.
Target organs
C8H18Cl2N2O2
Chemical formula :
Over-exposure signs/symptoms
Thermo Fisher Scientific : Thermo Fisher Scientific
Supplier : Manufacturer
Pierce Biotechnology Pierce Biotechnology : Adverse symptoms may include the following:
Inhalation
P.O. Box 117 P.O. Box 117 respiratory tract irritation
Rockford, IL 61105 Rockford, IL 61105 coughing
United States United States : No specific data.
Ingestion
815.968.0747 or 815.968.0747
: Adverse symptoms may include the following:
Skin
800.874.3723 800.874.3723
irritation
0020660 0020660B 1870970
Product No. : redness
0131
MSDS # : : Adverse symptoms may include the following:
Eyes
pain or irritation
Validation date : 6/19/2009.
watering
6/19/2009.
Print date :
redness
Responsible name : MSDS Specialist
: Pre-existing disorders involving any target organs mentioned in this MSDS as being at
Medical conditions
CHEMTREC: Use of : Refer to the instruction booklet for
In case of emergency : risk may be aggravated by over-exposure to this product.
aggravated by over-
800.424.9300 Substance/Preparation proper and intended use.
exposure
OUTSIDE US: Otherwise, contact supplier for
202.483.7616 specific applications.
The substance is not classified as dangerous according to Directive 67/548/EEC and its amendments.
: Not classified.
Classification
2. Hazards identification See toxicological information (section 11)
: Solid. [Powder.] 3. Composition/information on ingredients
Physical state
: This material is considered hazardous by the OSHA Hazard Communication Standard
OSHA/HCS status
United States
(29 CFR 1910.1200).
Name CAS number %
: WARNING !
Emergency overview
Dimethyl Adipimidate Dihydrochloride 14620-72-5 98 - 100
CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. CAN CAUSE
TARGET ORGAN DAMAGE.
: Substance
Substance/preparation
Irritating to eyes, respiratory system and skin. Handling and/or processing of this
There are no ingredients or additional ingredients present which, within the current knowledge of the supplier and
material may generate a dust which can cause mechanical irritation of the eyes, skin,
in the concentrations applicable, are classified as hazardous to health or the environment and hence require
nose and throat. Avoid breathing dust. Avoid contact with eyes, skin and clothing. Can
reporting in this section.
cause target organ damage. Use only with adequate ventilation. Keep container tightly
closed and sealed until ready for use. Wash thoroughly after handling.
4. First aid measures
: Eye contact. Inhalation. Ingestion.
Routes of entry
Potential acute health effects : Move exposed person to fresh air. If it is suspected that fumes are still present, the
Inhalation
rescuer should wear an appropriate mask or self-contained breathing apparatus. Keep
: Irritating to respiratory system. Exposure to decomposition products may cause a health
Inhalation
person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest
hazard. Serious effects may be delayed following exposure.
occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous
: No known significant effects or critical hazards.
Ingestion
to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention.
: Irritating to skin.
Skin If unconscious, place in recovery position and get medical attention immediately.
Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
: Irritating to eyes.
Eyes
In case of inhalation of decomposition products in a fire, symptoms may be delayed.
Potential chronic health effects
The exposed person may need to be kept under medical surveillance for 48 hours.
: Can cause target organ damage.
Chronic effects
1/8 2/8
6/19/2009. 6/19/2009.
Biosciences Division 3747 N. Meridian Rd. Rockford, IL (815) 968-0747 www.thermo.com/pierce Biosciences Division 3747 N. Meridian Rd. Rockford, IL (815) 968-0747 www.thermo.com/pierce
Pierce PO Box 117 61105 (815) 968-7316 Fax Pierce PO Box 117 61105 (815) 968-7316 Fax
Dimethyl Adipimidate Dihydrochloride Dimethyl Adipimidate Dihydrochloride
4. First aid measures 6. Accidental release measures
: Wash out mouth with water. Remove dentures if any. Move exposed person to fresh : Move containers from spill area. Approach release from upwind. Prevent entry into
Ingestion Large spill
air. Keep person warm and at rest. If material has been swallowed and the exposed sewers, water courses, basements or confined areas. Vacuum or sweep up material
person is conscious, give small quantities of water to drink. Stop if the exposed person and place in a designated, labeled waste container. Avoid creating dusty conditions and
feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do prevent wind dispersal. Dispose of via a licensed waste disposal contractor. Note: see
so by medical personnel. If vomiting occurs, the head should be kept low so that vomit section 1 for emergency contact information and section 13 for waste disposal.
does not enter the lungs. Get medical attention. Never give anything by mouth to an
: Move containers from spill area. Vacuum or sweep up material and place in a
Small spill
unconscious person. If unconscious, place in recovery position and get medical designated, labeled waste container. Dispose of via a licensed waste disposal
attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, contractor.
tie, belt or waistband.
7. Handling and storage
: Flush contaminated skin with plenty of water. Remove contaminated clothing and
Skin contact
shoes. Continue to rinse for at least 10 minutes. Get medical attention. Wash clothing
: Put on appropriate personal protective equipment (see section 8). Eating, drinking and
Handling
before reuse. Clean shoes thoroughly before reuse.
smoking should be prohibited in areas where this material is handled, stored and
: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting
Eye contact processed. Workers should wash hands and face before eating, drinking and smoking.
the upper and lower eyelids. Check for and remove any contact lenses. Get medical Do not breathe dust. Do not ingest. Avoid contact with eyes, skin and clothing. Use
attention. only with adequate ventilation. Wear appropriate respirator when ventilation is
: No action shall be taken involving any personal risk or without suitable training. If it is
Protection of first-aiders inadequate. Keep in the original container or an approved alternative made from a
suspected that fumes are still present, the rescuer should wear an appropriate mask or compatible material, kept tightly closed when not in use. Empty containers retain
self-contained breathing apparatus. It may be dangerous to the person providing aid to product residue and can be hazardous. Do not reuse container.
give mouth-to-mouth resuscitation.
: Store between the following temperatures: 2 to 8癈 (35.6 to 46.4癋). Store in
Storage
See section 11 for more detailed information on health effects and symptoms. accordance with local regulations. Store in original container protected from direct
sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see
5. Fire-fighting measures section 10) and food and drink. Keep container tightly closed and sealed until ready for
use. Containers that have been opened must be carefully resealed and kept upright to
: No specific fire or explosion hazard.
Flammability of the product prevent leakage. Do not store in unlabeled containers. Use appropriate containment to
Extinguishing media avoid environmental contamination.
: Use an extinguishing agent suitable for the surrounding fire.
Suitable
8. Exposure controls/personal protection
: None known.
Not suitable
: Promptly isolate the scene by removing all persons from the vicinity of the incident if
Special exposure hazards Europe
there is a fire. No action shall be taken involving any personal risk or without suitable No exposure limit value known.
training.
Consult local authorities for acceptable exposure limits.
: Decomposition products may include the following materials:
Hazardous combustion
: If this product contains ingredients with exposure limits, personal, workplace atmosphere
Recommended monitoring
carbon oxides
products
or biological monitoring may be required to determine the effectiveness of the ventilation
procedures
nitrogen oxides
or other control measures and/or the necessity to use respiratory protective equipment.
halogenated compounds
: Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapor
Engineering measures
: Fire-fighters should wear appropriate protective equipment and self-contained breathing
Special protective
or mist, use process enclosures, local exhaust ventilation or other engineering controls
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
equipment for fire-fighters
to keep worker exposure to airborne contaminants below any recommended or statutory
limits.
6. Accidental release measures
: Wash hands, forearms and face thoroughly after handling chemical products, before
Hygiene measures
: No action shall be taken involving any personal risk or without suitable training.
Personal precautions eating, smoking and using the lavatory and at the end of the working period. Appropriate
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from techniques should be used to remove potentially contaminated clothing. Wash
entering. Do not touch or walk through spilled material. Avoid breathing dust. Provide contaminated clothing before reusing. Ensure that eyewash stations and safety showers
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put are close to the workstation location.
on appropriate personal protective equipment (see section 8).
Personal protection
: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
Environmental precautions
: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
Respiratory
and sewers. Inform the relevant authorities if the product has caused environmental
standard if a risk assessment indicates this is necessary. Respirator selection must be
pollution (sewers, waterways, soil or air).
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
3/8 4/8
6/19/2009. 6/19/2009.
Biosciences Division 3747 N. Meridian Rd. Rockford, IL (815) 968-0747 www.thermo.com/pierce Biosciences Division 3747 N. Meridian Rd. Rockford, IL (815) 968-0747 www.thermo.com/pierce
Pierce PO Box 117 61105 (815) 968-7316 Fax Pierce PO Box 117 61105 (815) 968-7316 Fax
Dimethyl Adipimidate Dihydrochloride Dimethyl Adipimidate Dihydrochloride
8. Exposure controls/personal protection 11 . Toxicological information
: Chemical-resistant, impervious gloves complying with an approved standard should be
Hands Teratogenicity
worn at all times when handling chemical products if a risk assessment indicates this is : Not available.
Conclusion/Summary
necessary.
Reproductive toxicity
: Safety eyewear complying with an approved standard should be used when a risk
Eyes
: Not available.
Conclusion/Summary
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If operating conditions cause high dust concentrations to be produced,
Europe
use dust goggles.
Repeated or prolonged inhalation of dust may lead to chronic respiratory irritation.
Chronic effects :
: Personal protective equipment for the body should be selected based on the task being
Skin
No known significant effects or critical hazards.
Carcinogenicity :
performed and the risks involved and should be approved by a specialist before handling
this product. No known significant effects or critical hazards.
Mutagenicity :
: Emissions from ventilation or work process equipment should be checked to ensure they
Environmental exposure No known significant effects or critical hazards.
Teratogenicity :
comply with the requirements of environmental protection legislation. In some cases,
controls
No known significant effects or critical hazards.
Developmental effects :
fume scrubbers, filters or engineering modifications to the process equipment will be
No known significant effects or critical hazards.
Fertility effects :
necessary to reduce emissions to acceptable levels.
12 . Ecological information
9. Physical and chemical properties
: No known significant effects or critical hazards.
Environmental effects
Solid. [Powder.]
Physical state :
United States
White.
Color :
Aquatic ecotoxicity
245.15 g/mole
Molecular weight :
: Not available.
Conclusion/Summary
C8H18Cl2N2O2
Molecular formula :
: No known significant effects or critical hazards.
Other adverse effects
215 to 220癈 (419 to 428癋)
Melting/freezing point :
Dispersible in the following materials: cold water and hot water.
Dispersibility properties :
13 . Disposal considerations
Soluble in the following materials: cold water and hot water.
Solubility :
: The generation of waste should be avoided or minimized wherever possible. Dispose of
Waste disposal
surplus and non-recyclable products via a licensed waste disposal contractor. Disposal
10 . Stability and reactivity of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any regional
: The product is stable. Under normal conditions of storage and use, hazardous
Chemical stability
local authority requirements. Avoid dispersal of spilled material and runoff and contact
polymerization will not occur.
with soil, waterways, drains and sewers.
: No specific data.
Conditions to avoid
: Within the present knowledge of the supplier, this product is not regarded as
Hazardous waste
: No specific data.
Incompatible materials
hazardous waste, as defined by EU Directive 91/689/EEC.
: Under normal conditions of storage and use, hazardous decomposition products should
Hazardous decomposition
Disposal should be in accordance with applicable regional, national and local laws and regulations.
not be produced.
products
Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
: Will not occur.
Possibility of hazardous
for additional handling information and protection of employees.
reactions
14 . Transport information
11 . Toxicological information
Regulatory UN number Proper shipping Classes PG*
United States
information name
Acute toxicity
Not - - -
: To the best of our knowledge, the toxicological properties of this substance have not DOT Classification
Conclusion/Summary
regulated.
been thoroughly investigated.
Chronic toxicity Not - - -
IATA-DGR Class
: Not available.
Conclusion/Summary regulated.
Carcinogenicity PG* : Packing group
: Not available.
Conclusion/Summary
Mutagenicity
: Not available.
Conclusion/Summary
5/8 6/8
6/19/2009. 6/19/2009.
Biosciences Division 3747 N. Meridian Rd. Rockford, IL (815) 968-0747 www.thermo.com/pierce Biosciences Division 3747 N. Meridian Rd. Rockford, IL (815) 968-0747 www.thermo.com/pierce
Pierce PO Box 117 61105 (815) 968-7316 Fax Pierce PO Box 117 61105 (815) 968-7316 Fax
Dimethyl Adipimidate Dihydrochloride Dimethyl Adipimidate Dihydrochloride
16 . Other information
15 . Regulatory information
National Fire Protection :
United States
Association (U.S.A.)
: Irritating material
HCS Classification
Flammability
Target organ effects 0
2 0
: United States inventory (TSCA 8b): Not determined.
U.S. Federal regulations Health Instability
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found. Special
SARA 302/304/311/312 hazardous chemicals: No products were found.
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: No Date of printing : 6/19/2009.
products were found. : 6/19/2009.
Date of issue
Clean Water Act (CWA) 307: No products were found. Date of previous issue : No previous validation.
Clean Water Act (CWA) 311: No products were found. Version :1
Clean Air Act (CAA) 112 accidental release prevention: No products were found. Indicates information that has changed from previously issued version.
Clean Air Act (CAA) 112 regulated flammable substances: No products were found. Notice to reader
Clean Air Act (CAA) 112 regulated toxic substances: No products were found. To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
Canada supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
: Class D-2B: Material causing other toxic effects (Toxic).
WHMIS (Canada)
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
: CEPA Toxic substances: This material is not listed.
Canadian lists
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
Canadian ARET: This material is not listed.
guarantee that these are the only hazards that exist.
Canadian NPRI: This material is not listed.
Alberta Designated Substances: This material is not listed. This product has been classified according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
Ontario Designated Substances: This material is not listed.
Quebec Designated Substances: This material is not listed.
: Canada inventory: This material is not listed.
Canada inventory
EU regulations
: This product is not classified according to EU legislation.
Risk phrases
:
International regulations
: Australia inventory (AICS): Not determined.
International lists
China inventory (IECSC): Not determined.
Korea inventory (KECI): Not determined.
Philippines inventory (PICCS): Not determined.
Japan inventory (ENCS): Not determined.
16 . Other information
: CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. CAN CAUSE
Label requirements
TARGET ORGAN DAMAGE.
Hazardous Material :
Information System (U.S.A.)
2
Health
0
Flammability
0
Physical hazards
The customer is responsible for determining the PPE code for this material.
7/8 8/8
6/19/2009. 6/19/2009.
Biosciences Division 3747 N. Meridian Rd. Rockford, IL (815) 968-0747 www.thermo.com/pierce Biosciences Division 3747 N. Meridian Rd. Rockford, IL (815) 968-0747 www.thermo.com/pierce
Pierce PO Box 117 61105 (815) 968-7316 Fax Pierce PO Box 117 61105 (815) 968-7316 Fax
|