Safety Data Sheet
AEROHYDRAULIC 520
Product name : Page : 1/6
SDS n?:30986-31 Version :1.00 Version of :2004-12-06
This sheet supersedes the one dated :2004-02-06
PRODUCT LABELS
LABELLING (standard or EU): Concerned
R-phrases : R-52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
S-phrases : S-61 Avoid release to the environment. Refer to special instructions/Safety Data
Sheets.
TRANSPORT LABELLING: Not applicable.
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY UNDERTAKING
Name of the product : AEROHYDRAULIC 520
Code No. : 126
Product application : Hydraulic fluid for aviation
Supplier : TOTAL Nederland N.V.
Nieuwe Havenstraat 2.
2272 AD Voorburg
NEDERLAND
Tel: +31 (0) 70-3180480
Fax: +31 (0) 70-3871157
2. COMPOSITION/INFORMATION ON INGREDIENTS
PREPARATION
Chemical nature : Petroleum-derived severely refined mineral-base product
in which the polycyclic aromatic hydrocarbons (PCA or PAH) content, measured by
IP 346, is less than 3%
Substances presenting a health hazard EC No. CAS No. Content Symbol(s) R-phrases
Mineral oil strongly hydrogenated 8042-47-5 <7 % Xn R-65, 66
Dodecyl - methacrylate 142-90-5 <0,2 % Xi ,N R-36/37/38, 50/53
Triphenyl phosphate 204-112-2 115-86-6 <0,2 % N R-50/53
See section 16 for explanations of R-phrases :
3. HAZARDS IDENTIFICATION
Health effects : Under normal conditions of use, the product holds no danger of intoxication
Environmental impact : Harmful to aquatic organisms.
May cause long-term adverse effects in the aquatic environment.
Do not discharge this product into the environment.
Physico-chemical hazards : No specific risk of fire or explosion under normal conditions of use
4. FIRST AID MEASURES
IN CASE OF SERIOUS OR PERSISTENT CONDITIONS, CALL A DOCTOR OR EMERGENCY MEDICAL CARE.
Inhalation : Inhalation of heavy concentrations of vapour, fumes or spray, may cause mild
irritation of the throat.
Transport the person into fresh air, keep warm and allow to rest.
Quick-FDS [14439-53984-01460-000101] - 2007-07-13 - 14:59:44
Safety Data Sheet
AEROHYDRAULIC 520
Product name : Page : 2/6
SDS n?:30986-31 Version :1.00 Version of :2004-12-06
This sheet supersedes the one dated :2004-02-06
Ingestion : Possible risk of vomiting and diarrhoea.
Do not induce vomiting to avoid the risk of aspiration into the respiratory tract.
Give nothing to drink
Skin contact : If the skin is exposed to high-pressure spray, the product may enter the human body.
In all such cases the affected person must be taken to hospital, even if no sign of
injury can be detected.
Immediately remove all soiled or stained clothing.
Wash the affected area immediately and repeatedly with soap and water.
Eye contact : Keep eyes open and rinse immediately and repeatedly with water for at least 15
minutes.
Aspiration : If the product is believed to have entered the lungs (in case of vomiting, for
example), take the person to hospital for immediate care.
5. FIRE FIGHTING MEASURES
Flash point:
See heading 9
Extinguishing media : - suitable:
Foam, carbon dioxide (CO2), powder.
- not recommended:
do not use water jets (stick jets) for extinguishing fire since they could help to
spread the flames.
Protective measures for firefighters : Insulated breathing apparatus must be worn in confined premises with heavy
concentrations of fumes and gases.
6. ACCIDENTAL RELEASE MEASURES
See sections 8 and 13.
After spillage / leakage : - On the soil:
Surfaces on which the product has been spilled may become slippery.
Do not allow the product to enter sewers or rivers or contaminate the soil.
Recover with mechanical means such as pumps and skimmers.
Contain and collect the spilled product with sand or any other inert absorbant
material.
- On water:
Floating absorbant material, then mechanical recovery.
If the product is spilled in a river or in the sewers, notify the authorities of the
possible presence of surface effluent.
7. HANDLING AND STORAGE
HANDLING :
Prevention of user exposure : Ventilate extensively if the formation of vapours, fumes, mists or aerosol is a risk.
Make all the necessary arrangements in order to reduce exposure risk, notably to
products in use or to wastes.
Keep away from combustible substances; keep away from food and beverages.
Prevention of fire and explosion : Empty containers may contain flammable or explosive vapours.
There is a fire hazard associated with rags, paper or any other material used to
remove spills which become soaked with product.
Avoid accumulation of these: they are to be disposed off safely after use.
Quick-FDS [14439-53984-01460-000101] - 2007-07-13 - 14:59:44
Safety Data Sheet
AEROHYDRAULIC 520
Product name : Page : 3/6
SDS n?:30986-31 Version :1.00 Version of :2004-12-06
This sheet supersedes the one dated :2004-02-06
Precautions : Avoid static electricity build up with connection to earth.
Set up machinery and equipment so as to avoid the risk of accidental spills or
splashes onto hot machine parts and electrical contacts (on joint failure, for
example).
. Oil leaks in a pressured circuit may result in a fine inflammable spray (the
flammability limit for oil mist is depressed when concentrations of about 45g/m3
are reached).
STORAGE :
Technical measures : Make the necessary arrangements to prevent water and soil pollution.
Storage precautions : - Suitable:
Store at room temperature, protected against contact with water and moisture, and
away from any source of ignition.
Keep containers closed when not in use
- To be avoided:
Do not store exposed to the elements.
Incompatible products : Dangerous reaction with strong oxidizing agents.
Packaging materials : - Recommended:
Use only hydrocarbon-resistant containers, joints, pipes, etc.
Keep in original container if possible.
Otherwise, transfer all indications on the regulatory label to the new container.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Technical measures : Use the product in a properly ventilated atmosphere.
When working on enclosed place (tanks, reservoirs...), make sure that atmosphere is
not sufocating and/or wear recommended equipment.
Hand protection : Impermeable hydrocarbon-proof gloves.
recommended material: nitrile , neoprene.
The break through times of the same type of glove of different manufacturers can be
very different - even if the layer thickness is similar. Therefore the break through
times have to be found out from the manufacturer of the protective gloves
themselves.
The demands on the gloves are determined by the conditions in practice (e.g.
multiple use, mechanical load, temperature, strength and duration of exposition).
Before choosing suitable gloves, it is recommended that the user tests the gloves.
Eye protection : Goggles, in case of risk of splashing.
Skin and body (other than the hands) protection : As required, wear a face mask, hydrocarbon-proof clothing, and safety boots (when
handling drums).
Don磘 wear rings, watches or anything similar which may be able to hold the
product and give rise to skin diseases.
Hygienic work practices : Avoid prolonged or repeated contact with the skin, particularly with used or waste
oil.
Immediately remove all soiled or stained clothing.
If the product comes into contact with the skin, wash the affected area immediately
and copiously with soap and water.
Do not use abrasives, solvents or fuels.
Do not use cloths stained with the product to dry hands.
Do not put the product-soaked rags into the pockets of working clothes.
Do not eat, drink or smoke while handling the product.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Clear liquid
Colour : Red.
Quick-FDS [14439-53984-01460-000101] - 2007-07-13 - 14:59:44
Safety Data Sheet
AEROHYDRAULIC 520
Product name : Page : 4/6
SDS n?:30986-31 Version :1.00 Version of :2004-12-06
This sheet supersedes the one dated :2004-02-06
Odour : Characteristic.
Density/specific gravity : 872 Kg/m3
Temperature (癈) 15
Flash point : > 82 ?C (ASTM D 93)
Temp閞ature d'auto-inflammation : > 250 ?C (ASTM E 659)
Comments on autoignition temperature : This temperature may be significantly lower under particular conditions (slow
oxidation on finely divided materials...).
Partition coefficient (log Pow) : Log Pow > 6
Temperature (癈) (20癈)
Viscosity : 13.8 mm2/s
Temperature (癈) 40
10. STABILITY AND REACTIVITY
Stability : The product is stable at normal storage, handling and use temperatures.
Conditions to avoid : Heat (temperatures above flash point), sparks, ignition points, flames, static
electricity
Materials to avoid : Avoid contact with strong oxidizers
Hazardous decomp. products : Incomplete combustion and thermolysis produces potentially toxic gases such as
CO, CO2, various hydrocarbons, aldehydes and soot.
11. TOXICOLOGICAL INFORMATION
Acute toxicity / Local effect :
Inhalation, comments: - Inhalation :
Risk is improbable under normal conditions of use
Inhalation of high concentrations of vapour or aerosols may cause irritation of the
upper respiratory tract.
Skin contact, comments: - Contact with skin :
Risk is improbable under normal conditions of use.
If the skin is exposed to high-pressure spray, the product may enter the body. In all
such cases the affected person must be taken to hospital, even if no sign of injury
can be detected
Ingestion, comments: - Ingestion :
In case of ingestion of small quantities, no important effect observed. in case of
ingestion of larger amounts: abdominal pain, diarrhea, ...
CHRONIC TOXICITY OR LONG-TERM TOXICITY :
Skin contact : Characteristic skin affections (oil blisters) may develop following prolonged and
repeated exposure through contact with stained clothing
Sensitization : To our knowledge, the product does not cause aggravated sensitivity.
12. ECOLOGICAL INFORMATION
Comments about ecotoxicity : no information available for used product
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
Quick-FDS [14439-53984-01460-000101] - 2007-07-13 - 14:59:44
Safety Data Sheet
AEROHYDRAULIC 520
Product name : Page : 5/6
SDS n?:30986-31 Version :1.00 Version of :2004-12-06
This sheet supersedes the one dated :2004-02-06
Mobility : - Air:
there is a slow loss by evaporation.
- Water:
Insoluble in water
- Soil:
Given its physical and chemical characteristics, the product generally shows little
mobility in the ground.
Persistence and degradability : No experimental information about the finished product.
However the "mineral oil" fraction of the new product is intrinsically biodegradable.
Some components of the product may not be biodegradable.
13. DISPOSAL CONSIDERATIONS
Waste disposal : Dispose of in a safe manner, in accordance with local regulations.
If need be, collection by an authorised waste contractor and regeneration or
incineration at an approved installation.
Waste class : 13 01 10
The waste classification is dependant on the composition of the product at the time
of disposal.
The waste classification mentioned here represents only a recommendation. The
waste producer is responsible for the correct specification of the waste. The
specification of the waste classification should be in arrangement with the
authorised waste disposal company.
Disposal of contaminated packaging : Proceed in compliance with the prevailing regulations.
14. TRANSPORT INFORMATION
Road (ADR) / Rail (RID) :
Class : Not restricted for transport.
Transport by barge (ADNR) :
Marine (IMO-IMDG) :
Air (ICAO/IATA) :
15. REGULATORY INFORMATION
Risk phrases : R-52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
Safety phrases : S-61 Avoid release to the environment. Refer to special instructions/Safety Data
Sheets.
EU directives : Hazardous preparations directive 1999/45/EC modified (Directive 2001/60/EC).
16. OTHER INFORMATION
Explanations of R-phrases in section 2 : R-65 Harmful: may cause lung damage if swallowed.
R-66 Repeated exposure may cause skin dryness or cracking.
R-36/37/38 Irritating to eyes, respiratory system and skin.
R-50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
Revision date: 2004-12-06
Supersedes the data sheet of: 2004-02-06
* Information revised since the previous version of the SDS :
Quick-FDS [14439-53984-01460-000101] - 2007-07-13 - 14:59:44
Safety Data Sheet
AEROHYDRAULIC 520
Product name : Page : 6/6
SDS n?:30986-31 Version :1.00 Version of :2004-12-06
This sheet supersedes the one dated :2004-02-06
SDS No. : p055-0000915-51
This safety data sheet serves to complete but not to replace the technical product sheets. The information contained herein is given in good
faith and is accurate to the best of knowledge at the date indicated above.It is understood by the user that any use of the product for
purposes other than those for which it was designed entails potential risk.The information given herein in no way dispenses the user from
knowing and applying all provisions regulating his activity.The user bears sole liability for the precautions required when using the
product.The regulatory texts indicated herein are intended to aid the user to fulfil his obligations. This list is not to be considered complete
and exhaustive.It is the user's responsibility to ensure that he is subject to no other obligations than those mentioned.
Quick-FDS [14439-53984-01460-000101] - 2007-07-13 - 14:59:44
|