MATERIAL SAFETY DATA SHEET U.S. DEPARTMENT OF LABOR
May be used to comply with Occupational Safety and
OSHA's Hazard Communication Health Administration
Standard,29CFR 1910.2100. (Non-Mandatory Form)
006-NOZZLE GEL
KCI, INC CHEMTREC(24-HOUR)800-424-9300
3710 N. DAVIDSON STREET INFORMATION 704-372-8435
CHARLOTTE,N.C. 28205 DATE PREPARED: JANUARY 14, 2004
SECTION II-HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous components OSHA PEL ACGIH TLV %(optional)
None N/A N/A
The ingredients in this product are not listed in 29 CFR 1910
Subpart 2 nor do they appear in "Threshold Limit Values for
Chemical Substances in the work environment adopted by ACGIH for
1985-86." They are also not reportable under Section 313 of Title III of SARA.
SECTION III-PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: NDA Specific Gravity(H2O=1).815-.880
Vapor Pressure: NDA Melting Point: 100.4-140 F
Vapor Density: NDA Evaporation Rate: NDA
(BUTYL=1)
Solubility in Water: NIL
Appearance and Odor: Opaque, no odor
Volatile(by weight %): 0 at 25C.
Extinguishign Media: Carbon dioxide,dry chemical or foam.
Special Firefighting Procedures: Pressure-demand,self-contained
protection should be provided.
Water spray is an unsuitable
extinguishing agent.
Unusual Fire and Explosion Hazards: NONE
006 NOZZLE GEL PAGE 2 OF 4
SECTION V-REACTIVITY DATA
Stability Unstable: Conditions to Avoid
NONE
Stable :X
Incompatibility(Materials to Avoid)
N/A
Hazardous Decomposition or Byproducts
N/A
Hazardous Polymerization: Conditions to Avoid
May Occur: N/A
Will Not Occur: X
SECTION VI-HEALTH HAZARD DATA
Route(s)of Entry: Inhalation: NO Skin: NO Ingestion: NO
Health Hazards(Acute and Chronic)
Acute-None
Chronic-None
Carcinogenicity: No NTP N/A IARC Monographs N/A OSHA N/A
Signs and Symptoms of Exposure: NDA
Emergency First Aid Procedures: Eyes:flush eyes with water for
15 minutes. Skin:wash with soap
& water. Inhalation : remove to
fresh air. Call physician.
Ingestion: drink water.
006 NOZZLE GEL PAGE 3 OF 4
SECTION VII-PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled:
Shut off leak and dike up large
spills. After cooling and solid-
ification,scrape and/or shovel
up material. Finally,clean area
with an oil absorbent material.
Waste Disposal Method: Dispose of in accordance with
local, state, and federal regu-
lations.
Precautions to Be Taken in
Handling and Storing: Store away from flame,heat(250F)
maximum. Also keep away from
strong oxidizing agents.