IDENTITY: Texture Dispersing Reagent CODE NUMBER: 5644
CHEMICAL NAME/FAMILY: N/A
SECTION I - GENERAL INFORMATION
MANUFACTURER: LaMotte Company, P.O. Box 329, Chestertown, Maryland, 21620
PHONE: 410-778-3100 EMERGENCY PHONE: Chemtrec: 800-424-9300
DATE PREPARED: September 1999
SECTION II - INGREDIENT INFORMATION
INGREDIENT CAS # PERCENT OSHA PEL/ACGIH TLV (PPM)
Sodium Pyrophosphate, 10-Hydrate (Tetrasodium 13472-36-1 2 PEL: N/A
Pyrophosphate)
TLV: 5 mg/cubic m
Water to 100%
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
APPEARANCE: Clear Colorless Liquid pH: 10
SOLUBILITY IN WATER: Soluble ODOR: None
BOILING POINT: ca. 100 deg C MELTING POINT: N/A
VAPOR PRESSURE: <17 @ 20 deg C VAPOR DENSITY: <1 (air=1)
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: N/A FLAMMABLE LIMITS: LEL: N/A UEL: N/A
EXTINGUISHING MEDIA: Not a fire hazard
HEALTH (NFPA) : 1 FLAMMABILITY (NFPA) : 0 REACTIVITY (NFPA) : 0
SPECIAL FIRE FIGHTING PROCEDURE: N/A
UNUSUAL FIRE & EXPLOSION HAZARDS: N/A
SECTION V - REACTIVITY DATA
STABILITY: _X_STABLE ___UNSTABLE
CONDITIONS TO AVOID: N/A.
INCOMPATIBILITY: N/A.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS: POx
SECTION VI - HEALTH HAZARD DATA
TOXICITY: orl rat LD50: 4000 mg/kg for sodium pyrophosphate solid.
PRIMARY ROUTE OF ENTRY: ___INHALATION _X_SKIN ___EYES _X_INGESTION
CARCINOGENICITY: _X_NONE ___OSHA ___NTP ___IARC
OTHER HEALTH RELATED COMMENTS:
TARGET ORGANS: N/A.
SIGNS AND SYMPTOMS OF EXPOSURE: May be irritating to skin. May be harmful if swallowed.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: N/A.
EMERGENCY & FIRST AID PROCEDURES:
EYE CONTACT: Flush thoroughly with water.
INGESTION: Do not induce vomiting. Give plenty of water. Consult physician.
INHALATION: N/A.
SKIN CONTACT: Flush thoroughly with water.
1
MSDS ID#: MSDLAM.28 C-P ITEM #: 99030-00, -50
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
SPILL RESPONSE: Neutralize with vinegar or other dilute acid. Mop up and flush down drain with excess water.
WASTE DISPOSAL: Neutralize and flush down drain with excess water. Dispose according to federal, state, and local
regulations.
SECTION VIII - CONTROL MEASURES
IN HANDLING: _X_ GLOVES _X_EYE PROTECTION ___N/A _X_ OTHER: Lab Coat
VENTILATION: _X_NORMAL ___MECHANICAL ___RESPIRATORY PROTECTION
WORK/HYGIENIC PRACTICES: Avoid contact with skin.
SPECIAL PRECAUTIONS: N/A
KEY: NA = NOT APPLICABLE OR NOT AVAILABLE ND = NOT DETERMINED
DISCLAIMER
The above information has been transformed to this format by Cole-Parmer Instrument Company, from a Material Safety
Data Sheet supplied by the manufacturer identified in Section I. The contents of this MSDS have been represented to Cole
Parmer by the manufacturer to be complete and accurate. If you have any questions related to the material provided
herein, contact the manufacturer directly at the address and phone number given in Section 1 of the MSDS. Cole Parmer
does not, in any way, represent itself as an expert in the chemical described in this MSDS and assumes no liability for any
incomplete or inaccurate information contained herein.
SECTION I - GENERAL INFORMATION
MANUFACTURER: LaMotte Company, P.O. Box 329, Chestertown, Maryland, 26120
PHONE: 410-778-3100 EMERGENCY PHONE: Chemtrec: 800-424-9300
DATE PREPARED: July 1999
SECTION II - INGREDIENT INFORMATION
INGREDIENT CAS # PERCENT OSHA PEL/ACGIH TLV (PPM)
Polyacrylamide (Magnifloc 900 N) 9003-05-8 <0.1
Water to 100%
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: N/A. FLAMMABLE LIMITS: LEL: N/A UEL: N/A
EXTINGUISHING MEDIA: Not a fire hazard.
HEALTH (NFPA) : 0 FLAMMABILITY (NFPA) : 0 REACTIVITY (NFPA) : 0
SPECIAL FIRE FIGHTING PROCEDURE: N/A.
UNUSUAL FIRE & EXPLOSION HAZARDS: N/A.
SECTION V - REACTIVITY DATA
STABILITY: _X_STABLE ___UNSTABLE
CONDITIONS TO AVOID: N/A.
INCOMPATIBILITY:N/A.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS: N/A.
SECTION VI - HEALTH HAZARD DATA
TOXICITY: Non-toxic
PRIMARY ROUTE OF ENTRY: ___INHALATION ___SKIN ___EYES ___INGESTION
CARCINOGENICITY: _X_NONE ___OSHA ___NTP ___IARC
OTHER HEALTH RELATED COMMENTS:
TARGET ORGANS: N/A.
SIGNS AND SYMPTOMS OF EXPOSURE:N/A.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: N/A.
EMERGENCY & FIRST AID PROCEDURES:
EYE CONTACT: Flush thoroughly with water.
INGESTION: Drink water. Consult physician.
INHALATION: N/A
SKIN CONTACT: Flush with water.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
SPILL RESPONSE: Wash down drain with water.
WASTE DISPOSAL: Flush down drain with water. Dispose according to federal, state, and local regulations.
SECTION VIII - CONTROL MEASURES
IN HANDLING: ___ GLOVES _X_EYE PROTECTION ___N/A ___ OTHER: Lab Coat.
VENTILATION: __X_NORMAL ___MECHANICAL ___RESPIRATORY PROTECTION
WORK/HYGIENIC PRACTICES: N/A.
SPECIAL PRECAUTIONS: N/A.
3
MSDS ID#: MSDLAM.28 C-P ITEM #: 99030-00, -50
KEY: NA = NOT APPLICABLE OR NOT AVAILABLE ND = NOT DETERMINED
DISCLAIMER
The above information has been transformed to this format by Cole-Parmer Instrument Company, from a Material Safety
Data Sheet supplied by the manufacturer identified in Section I. The contents of this MSDS have been represented to Cole
Parmer by the manufacturer to be complete and accurate. If you have any questions related to the material provided
herein, contact the manufacturer directly at the address and phone number given in Section 1 of the MSDS. Cole Parmer
does not, in any way, represent itself as an expert in the chemical described in this MSDS and assumes no liability for any
incomplete or inaccurate information contained herein.